引用本文:
Ji Shuai Wang, Wei Deng, Yun Shen Chen, Cheng You Kan. Preparation of sulphonate-containing core/shell latex particles via seeded emulsion copolymerization[J]. Chinese Chemical Letters,
2010, 21(10): 1259-1262.
doi:
10.1016/j.cclet.2010.04.019
Citation: Ji Shuai Wang, Wei Deng, Yun Shen Chen, Cheng You Kan. Preparation of sulphonate-containing core/shell latex particles via seeded emulsion copolymerization[J]. Chinese Chemical Letters, 2010, 21(10): 1259-1262. doi: 10.1016/j.cclet.2010.04.019
Citation: Ji Shuai Wang, Wei Deng, Yun Shen Chen, Cheng You Kan. Preparation of sulphonate-containing core/shell latex particles via seeded emulsion copolymerization[J]. Chinese Chemical Letters, 2010, 21(10): 1259-1262. doi: 10.1016/j.cclet.2010.04.019
Preparation of sulphonate-containing core/shell latex particles via seeded emulsion copolymerization
摘要:
In this study, P(St-MAA)seed latex particles were first prepared via soap-free emulsion polymerization of styrene(St)and methacrylic acid (MAA), then the seed particles were allowed to swell with St at room temperature, and the P(St-MAA)/P(St-NaSS) core/shell latex particles were then synthesized via seeded emulsion copolymerization of St and sodium styrene sulphonate (NaSS) using AIBN as initiator in the presence of N, N'-methylenebisacrylamide (BAA, water-soluble crosslinker). Results showed that the polymerization could be carried out smoothly when the ratio of BAA to total monomers was less than 3 mol%, the narrow dispersed P(St-MAA)seed particles with the diameter of 150 nm and the P(St-MAA)/P(St-NaSS)core/shell latexes with the particle size of about 200 nm were synthesized. When the 25/75 mole ratio of NaSS/(St+MAA)and 2 mol% of BAA were used in the seeded emulsion polymerization, the resulted P(St-MAA)/P(St-NaSS) latex product showed a low weight loss after water extraction, and the NaSS unit content in the whole particle and in the shell reached 11.7 mol% and 34.6 mol%, respectively.
English
Preparation of sulphonate-containing core/shell latex particles via seeded emulsion copolymerization
Abstract:
In this study, P(St-MAA)seed latex particles were first prepared via soap-free emulsion polymerization of styrene(St)and methacrylic acid (MAA), then the seed particles were allowed to swell with St at room temperature, and the P(St-MAA)/P(St-NaSS) core/shell latex particles were then synthesized via seeded emulsion copolymerization of St and sodium styrene sulphonate (NaSS) using AIBN as initiator in the presence of N, N'-methylenebisacrylamide (BAA, water-soluble crosslinker). Results showed that the polymerization could be carried out smoothly when the ratio of BAA to total monomers was less than 3 mol%, the narrow dispersed P(St-MAA)seed particles with the diameter of 150 nm and the P(St-MAA)/P(St-NaSS)core/shell latexes with the particle size of about 200 nm were synthesized. When the 25/75 mole ratio of NaSS/(St+MAA)and 2 mol% of BAA were used in the seeded emulsion polymerization, the resulted P(St-MAA)/P(St-NaSS) latex product showed a low weight loss after water extraction, and the NaSS unit content in the whole particle and in the shell reached 11.7 mol% and 34.6 mol%, respectively.
扫一扫看文章
计量
- PDF下载量: 6
- 文章访问数: 652
- HTML全文浏览量: 6
下载:
