离子刻蚀法制备具有高效催化性能的m-Bi<sub>2</sub>O<sub>4</sub>/BiOCl p-n异质结催化剂

引用本文: 王隽秀, 张振宗, 汪曦, 沈奕, 郭永福, Po Keung Wong, 白仁碧. 离子刻蚀法制备具有高效催化性能的m-Bi₂O₄/BiOCl p-n异质结催化剂[J]. 催化学报, 2018, 39(11): 1792-1803. doi: 10.1016/S1872-2067(18)63142-0 shu

Citation: Junxiu Wang, Zhenzong Zhang, Xi Wang, Yi Shen, Yongfu Guo, Po Keung Wong, Renbi Bai. Synthesis of novel p-n heterojunction m-Bi₂O₄/BiOCl nanocomposite with excellent photocatalytic activity through ion-etching method[J]. Chinese Journal of Catalysis, 2018, 39(11): 1792-1803. doi: 10.1016/S1872-2067(18)63142-0 shu

离子刻蚀法制备具有高效催化性能的m-Bi₂O₄/BiOCl p-n异质结催化剂

a 苏州科技大学分离净化材料与技术研发中心, 江苏苏州 215009;
b 香港中文大学生命科学学院, 香港沙田
基金项目:
国家自然科学基金（51578354）；苏州科技局科技计划项目（SS201667）；江苏省六大人才高峰（2016-JNHB-067）；江苏省青蓝工程.

摘要: 光催化技术作为一种绿色的环境修复方法而备受关注，它直接利用太阳光作为能源，可有效地降解有机污染物.铋系化合物具有化学稳定性强、抑制光腐蚀、无毒和来源广泛等优点，被认为是一种环境友好的光催化剂，广泛用于降解染料、苯酚和其他有机污染物.BiOCl具有独特的内部结构，可形成内电场促进电子和空穴的移动，抑制其复合.但是BiOCl本身带隙能过大，只能被紫外光激发，对光的利用率较低，限制了其在环境治理中的应用.近两年来发现，m-Bi₂O₄带隙能小，可吸收大波长的可见光，催化性能好.为充分发挥m-Bi₂O₄的优异性质，改善BiOCl的性能，本文将BiOCl与m-Bi₂O₄复合制得新型催化剂，降低催化剂的带隙能，增强对光的吸收，提高量子效率，促进光生载流子的分离，抑制电子-空穴复合，从而提高催化剂性能，加速降解反应进程.
本文通过离子刻蚀法制备具有p-n异质结的m-Bi₂O₄/BiOCl复合催化剂，通过调节HCl的加入量制得不同比例的催化剂，并考察了其在可见光下催化降解MO（甲基橙）的性能.结果表明，m-Bi₂O₄/BiOCl复合催化剂在可见光下表现出优异的光催化降解MO和四环素的性能，反应10内min可降解95%的MO，反应150min内四环素的降解率为85.5%；该复合催化剂对MO和四环素的光降解效率分别是纯BiOCl的52.3和4.9倍.活性自由基捕获实验表明，空穴在光催化降解过程中起最主要的作用，其次是超氧自由基，羟基自由基对降解反应也起到一定的作用.
采用XRD，SEM，EDS，TEM，SAED，FT-IR，Raman，XPS，BET，UV-vis和光电流等表征方法分析了催化剂的结构、形貌、化学组成、元素价态、孔结构、带隙能、光学性质和载流子复合效率.结果表明，与BiOCl的斜四方体相比，m-Bi₂O₄/BiOCl复合催化剂呈现纳米片状结构，氯离子进入晶格的内部，颜色也由BiOCl原来的深褐色变为黄色.m-Bi₂O₄/BiOCl为介孔结构，比表面积为112.90m²/g，其吸收波长红移，由紫外光扩展至可见光区域，带隙能也由3.2降低为1.87eV，能带弯曲形成p-n异质结，提高了电子-空穴的转移效率，抑制其复合；m-Bi₂O₄/BiOCl的光电流密度高于m-Bi₂O₄和BiOCl，电子-空穴的分离效率更高，因而其催化性能更优越.

关键词:

English

Synthesis of novel p-n heterojunction m-Bi₂O₄/BiOCl nanocomposite with excellent photocatalytic activity through ion-etching method

a Center for Separation and Purification Materials & Technologies, Suzhou University of Science and Technology, Suzhou 215009, Jiangsu, China;
b School of Life Science, The Chinese University of Hong Kong, Shatin, Hong Kong, China
Received Date: 23 May 2018
Revised Date: 20 July 2018
Fund Project:
This work was supported by the National Natural Science Foundation of China (51578354), Suzhou Science and Technology Bureau (SS201667), Six Talent Peaks Program (2016-JNHB-067), and Qing Lan Project of Jiangsu Province.

Abstract: A novel p-n heterostructure photocatalyst m-Bi₂O₄/BiOCl was successfully synthetized through a facile ion-etching method. Via adjusting the added volume of HCl solution, a series of different ratios of composite photocatalysts were obtained. The as-prepared samples of physical, chemical and optical characteristics were examined by X-ray diffraction, scanning electron microscope, transmission electron microscope, energy dispersive X-ray spectroscopy, selected-area electron diffraction, Fourier transform infrared absorption, Raman microscope, N₂ adsorption-desorption, X-ray photoelectron spectroscopy and UV-vis spectrum technologies. The photocatalysts showed high degradation rate and complete mineralization ability for methyl orange and tetracycline solution under visible light. The reaction rate constant of m-Bi₂O₄/BiOCl for methyl orange was 52.28 times higher than that of BiOCl. The characterization presented a good stability of materials. Furthermore, the photocurrent response test certified that the heterostructure effectively accelerated the separation and migration of photo-generated carries. The scavenger experiments evidenced that hole (h⁺) and superoxide radical (·O₂^-) were the primary active radicals. A possible photocatalytic mechanism was proposed. This work provided an alternative photocatalyst applied to water environmental remediation.

Key words:

1. [1] H. Sopha, V. Podzemna, L. Hromadko, J. M. Macak, Electrochem. Commun., 2017, 84, 6-9.
2. [2] Q. Hao, R. Wang, H. Lu, C. A. Xie, W. Ao, D. Chen, C. Ma, W. Yao, Y. Zhu, Appl. Catal. B, 2017, 219, 63-72.
3. [3] J. Wang, J. Li, H. Li, S. Duan, S. Meng, X. Fu, S. Chen, Chem. Eng. J., 2017, 330, 433-441.
4. [4] X. Tian, T. Xu, Y. Wang, S. Meng, RSC Adv., 2017, 7, 36705-36713.
5. [5] H. Li, Z. Yang, J. Zhang, Y. Huang, H. Ji, Y. Tong, Appl. Surf. Sci., 2017, 423, 1188-1197.
6. [6] H. Huang, R. Cao, S. Yu, K. Xu, W. Hao, Y. Wang, F. Dong, T. Zhang, Y. Zhang, Appl. Catal. B, 2017, 219, 526-537.
7. [7] X. Xiao, R. Hao, M. Liang, X. Zuo, J. Nan, L. Li, W. Zhang, J. Hazard. Mater., 2012, 233-234, 122-130.
8. [8] L. W. Shan, G. I. Wang, L. Z. Liu, Z. Wu, J. Mol. Catal. A, 2015, 406, 145-151.
9. [9] J. Li, S. Sun, C. Qian, L. He, K. K. Chen, T. Zhang, Z. Chen, M. Ye, Chem. Eng. J., 2016, 297, 139-147.
10. [10] C. Lv, J. Sun, G. Chen, Y. Zhou, D. Li, Z. Wang, B. Zhao, Appl. Catal. B, 2017, 208, 14-21.
11. [11] J. Sun, X. Li, Q. Zhao, M.O. Tadé, S. Liu, Appl. Catal. B, 2017, 219, 259-268.
12. [12] H. Wang, Y. Sun, G. Jiang, Y. Zhang, H. Huang, Z. Wu, S. C. Lee, F. Dong, Environ. Sci. Technol., 2018, 52, 1479-1487.
13. [13] H. Wang, W. Zhang, X. Li, J. Li, W. Cen, Q. Li, F. Dong, Appl. Catal. B, 2018, 225, 218-227.
14. [14] X. A. Dong, W. Zhang, Y. Sun, J. Li, W. Cen, Z. Cui, H. Huang, F. Dong, J. Catal., 2018, 357, 41-50.
15. [15] W. Zhang, X. Liu, X.A. Dong, F. Dong, Y. Zhang, Chin. J. Catal., 2017, 38, 2030-2038.
16. [16] X. Ma, Z. Ma, T. Liao, X. Liu, Y. Zhang, L. Li, W. Li, B. Hou, J. Alloys Compd., 2017, 702, 68-74.
17. [17] L. Song, Y. Pang, Y. Zheng, C. Chen, L. Ge, J. Alloys Compd., 2017, 710, 375-382.
18. [18] L. Zhang, C. G. Niu, G. X. Xie, X. J. Wen, X. G. Zhang, G. M. Zeng, ACS Sustain. Chem. Eng., 2017, 5, 4619-4629.
19. [19] M. Li, Y. Zhang, X. Li, S. Yu, X. Du, Y. Guo, H. Huang, J. Colloid Interface Sci., 2017, 508, 174-183.
20. [20] H. Huang, K. Xiao, T. Zhang, F. Dong, Y. Zhang, Appl. Catal. B, 2017, 203, 879-888.
21. [21] X. Meng, Z. Zhang, J. Mol. Catal. A, 2016, 423, 533-549.
22. [22] B. Li, L. Shao, B. Zhang, R. Wang, M. Zhu, X. Gu, J. Colloid Interface Sci., 2017, 505, 653-663.
23. [23] Y. Mi, L. Wen, Z. Wang, D. Cao, R. Xu, Y. Fang, Y. Zhou, Y. Lei, Nano Energy, 2016, 30, 109-117.
24. [24] S. Fang, C. Ding, Q. Liang, Z. Li, S. Xu, Y. Peng, D. Lu, J. Alloys Compd., 2016, 684, 230-236.
25. [25] Y. Hu, Z. Jia, R. Lv, C. Fan, H. Zhang, Mater. Res. Bull., 2017, 94, 222-230.
26. [26] M. Sun, Q. Zhao, C. Du, Z. Liu, RSC Adv., 2015, 5, 22740-22752.
27. [27] V. C. Ferreira, M. C. Neves, A. R. Hillman, O. C. Monteiro, RSC Adv., 2016, 6, 77329-77339.
28. [28] L. Yu, X. Zhang, G. Li, Y. Cao, Y. Shao, D. Li, Appl. Catal. B, 2016, 187, 301-309.
29. [29] L. Song, Y. Pang, Y. Zheng, L. Ge, Appl. Phys. A, 2017, 123, 1-10.
30. [30] X. Chang, G. Yu, J. Huang, Z. Li, S. Zhu, P. Yu, C. Cheng, S. Deng, G. Ji, Catal. Today, 2010, 153, 193-199.
31. [31] L. Hao, H. Huang, Y. Guo, X. Du, Y. Zhang, Appl. Surf. Sci., 2017, 420, 303-312.
32. [32] H. Y. Wang, Z. S. Liu, L.T. Guo, H. L. Fan, X. Y. Tao, Mater. Sci. Semicond. Process., 2018, 77, 8-15.
33. [33] W. Wang, X. Chen, G. Liu, Z. Shen, D. Xia, P. K. Wong, J. C. Yu, Appl. Catal. B, 2015, 176-177, 444-453.
34. [34] J. Wang, K. Chen, Y. Shen, X. Wang, Y. Guo, X. Zhou, R. Bai, Res. Chem. Intermed., 2018, 44, 3061-3079.
35. [35] D. Xia, W. Wang, R. Yin, Z. Jiang, T. An, G. Li, H. Zhao, P. K. Wong, Appl. Catal. B, 2017, 214, 23-33.
36. [36] D. Xia, I. M. C. Lo, Water Res., 2016, 100, 393-404.
37. [37] F. Mian, G. Bottaro, M. Rancan, L. Pezzato, V. Gombac, P. Fornasiero, L. Armelao, ACS Omega, 2017, 2, 6298-6308.
38. [38] Y. Huang, W. Fan, B. Long, H. Li, F. Zhao, Z. Liu, Y. Tong, H. Ji, Appl. Catal. B, 2016, 185, 68-76.
39. [39] A. Hameed, M. Aslam, I. M. I. Ismail, N. Salah, P. Fornasiero, Appl. Catal. B, 2015, 163, 444-451.
40. [40] M. Sun, S. Li, T. Yan, P. Ji, X. Zhao, K. Yuan, D. Wei, B. Du, J. Hazard. Mater., 2017, 333, 169-178.
41. [41] S. Y. Chai, Y. J. Kim, M. H. Jung, A. K. Chakraborty, D. Jung, W. I. Lee, J. Catal., 2009, 262, 144-149.
42. [42] D. Kim, D. Jung, Chem. Phys. Lett., 2017, 674, 130-135.
43. [43] H. Huang, S. Tu, C. Zeng, T. Zhang, A. H. Reshak, Y. Zhang, Angew. Chem. Int. Ed., 2017, 56, 11860-11864.
44. [44] X. Zhang, T. Guo, X. Wang, Y. Wang, C. Fan, H. Zhang, Appl. Catal. B, 2014, 150-151, 486-495.
45. [45] X. Yan, X. Zhu, R. Li, W. Chen, J. Hazard. Mater., 2016, 303, 1-9.
46. [46] H. Chen, X. Wang, W. Bi, Y. Wu, W. Dong, J. Colloid Interface Sci., 2017, 502, 89-99.
47. [47] K. Li, Y. Liang, J. Yang, Q. Gao, Y. Zhu, S. Liu, R. Xu, X. Wu, J. Alloys Compd., 2017, 695, 238-249.
48. [48] G. He, C. Xing, X. Xiao, R. Hu, X. Zuo, J. Nan, Appl. Catal. B, 2015, 170-171, 1-9.
49. [49] F. T. Li, Q. Wang, X. J. Wang, B. Li, Y. J. Hao, R. H. Liu, D. S. Zhao, Appl. Catal. B, 2014, 150-151, 574-584.
50. [50] H. Y. Wang, Z. S. Liu, Y. L. Zhao, J. N. Niu, P. Z. Feng, Mater. Res. Bull., 2017, 89, 253-262.
51. [51] H. Lu, L. Xu, B. Wei, M. Zhang, H. Gao, W. Sun, Appl. Surf. Sci., 2014, 303, 360-366.
52. [52] A. Biswas, R. Das, C. Dey, R. Banerjee, P. Poddar, Cryst. Growth Des., 2013, 14, 236-239.
53. [53] Y. Na, Y. I. Kim, D. W. Cho, D. Pradhan, Y. Sohn, Mater. Sci. Semicond. Process., 2014, 27, 181-190.
54. [54] Y. Tian, C. F. Guo, Y. Guo, Q. Wang, Q. Liu, Appl. Surf. Sci., 2012, 258, 1949-1954.
55. [55] F. Nekouei, S. Nekouei, J. Alloys Compd., 2017, 701, 950-966.
56. [56] C. Yang, F. Li, T. Li, W. Cao, J. Mol. Catal. A, 2016, 418-419, 132-137.
57. [57] C. Cao, L. Xiao, C. Chen, Q. Cao, Appl. Surf. Sci., 2015, 357, 1171-1179.
58. [58] F. Dong, Y. Sun, M. Fu, Z. Wu, S.C. Lee, J. Hazard. Mater., 2012, 219-220, 26-34.
59. [59] L. Chen, R. Huang, S. F. Yin, S. L. Luo, C. T. Au, Chem. Eng. J., 2012, 193-194, 123-130.
60. [60] X. Li, C. Zhang, C. Hu, L. Xu, Q. Hu, S. Duo, W. Li, Y. Kang, J. Cluster Sci., 2017, 28, 2409-2418.
61. [61] P. Cui, J. Wang, Z. Wang, J. Chen, X. Xing, L. Wang, R. Yu, Nano Res., 2016, 9, 593-601.
62. [62] Y. L. Qi, Y. F. Zheng, H. Y. Yin, X. C. Song, J. Alloys Compd., 2017, 712, 535-542.
63. [63] J. Cao, X. Li, H. Lin, B. Xu, S. Chen, Q. Guan, Appl. Surf. Sci., 2013, 266, 294-299.
64. [64] H. Huang, X. Li, J. Wang, F. Dong, P. K. Chu, T. Zhang, Y. Zhang, ACS Catal., 2015, 5, 4094-4103.
65. [65] H. Huang, Y. He, X. Li, M. Li, C. Zeng, F. Dong, X. Du, T. Zhang, Y. Zhang, J. Mater. Chem. A, 2015, 3, 24547-24556.
66. [66] S. Yin, J. Di, M. Li, Y. Sun, J. Xia, H. Xu, W. Fan, H. Li, J. Mater. Sci., 2016, 51, 4769-4777.
67. [67] H. Huang, K. Xiao, Y. He, T. Zhang, F. Dong, X. Du, Y. Zhang, Appl. Catal. B, 2016, 199, 75-86.
68. [68] S. Bai, J. Jiang, Q. Zhang, Y. Xiong, Chem. Soc. Rev., 2015, 44, 2893-2939.

扫一扫看文章

计量

PDF下载量: 14
文章访问数: 1796
HTML全文浏览量: 281

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

离子刻蚀法制备具有高效催化性能的m-Bi₂O₄/BiOCl p-n异质结催化剂

English

Synthesis of novel p-n heterojunction m-Bi₂O₄/BiOCl nanocomposite with excellent photocatalytic activity through ion-etching method

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

离子刻蚀法制备具有高效催化性能的m-Bi2O4/BiOCl p-n异质结催化剂

English

Synthesis of novel p-n heterojunction m-Bi2O4/BiOCl nanocomposite with excellent photocatalytic activity through ion-etching method

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南： 你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

文章相关

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

离子刻蚀法制备具有高效催化性能的m-Bi₂O₄/BiOCl p-n异质结催化剂

Synthesis of novel p-n heterojunction m-Bi₂O₄/BiOCl nanocomposite with excellent photocatalytic activity through ion-etching method

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs