氮掺杂有序介孔碳负载超小尺寸铂纳米颗粒催化硝基苯类化合物选择加氢

引用本文: 梁继芬, 张晓明, 景铃胭, 杨恒权. 氮掺杂有序介孔碳负载超小尺寸铂纳米颗粒催化硝基苯类化合物选择加氢[J]. 催化学报, 2017, 38(7): 1252-1260. doi: 10.1016/S1872-2067(17)62833-X shu

Citation: Jifen Liang, Xiaoming Zhang, Lingyan Jing, Hengquan Yang. N-doped ordered mesoporous carbon as a multifunctional support of ultrafine Pt nanoparticles for hydrogenation of nitroarenes[J]. Chinese Journal of Catalysis, 2017, 38(7): 1252-1260. doi: 10.1016/S1872-2067(17)62833-X shu

氮掺杂有序介孔碳负载超小尺寸铂纳米颗粒催化硝基苯类化合物选择加氢

a 山西大学分子科学研究所, 山西太原 030006;
b 山西大学化学化工学院, 山西太原 030006
基金项目:
国家自然科学基金（201573136，U1510105）；山西大学人才事业启动经费（RSC723）.

摘要: 氮掺杂有序介孔碳材料不仅具有高的比表面积、大的孔容和均一可调的孔径等优点，其骨架中丰富的氮原子还可以对材料的物理化学性质、配位金属电荷密度等进行调控，是一类优异的催化剂载体.本文利用软模板（嵌段共聚物F127为模板），以间氨基苯酚为碳源和氮前体，制备出较高含氮量（9.58 wt%）和比表面积（417 m²/g），以及规则孔径分布的介孔碳材料.结果表明，制备的材料具有三维立方相结构.以该碳材料作为载体，使用传统浸渍氢气还原的策略负载纳米铂颗粒.发现氮掺杂的载体能够有效控制金属纳米颗粒的尺寸，可实现超小尺寸Pt纳米颗粒的有效负载（1.0 ±0.5 nm），且纳米颗粒均匀分布于介孔碳材料的孔道中.相比而言，使用相同负载方法的情况下，以不掺氮的介孔碳材料为载体，纳米粒子的尺寸较难控制（4.4 ±1.7 nm）且会发生孔道外颗粒聚集的情况.研究表明，骨架中的氮原子与金属间弱的相互作用对纳米粒子有稳定作用.这对制备超小尺寸的金属纳米粒子催化剂具有一定的指导意义.此外，由于纳米粒子的尺寸将大大影响催化剂活性中心的暴露程度，进而影响催化剂活性.因此，我们以硝基苯类化合物的氢化反应来评价该催化剂的催化性能.在室温和1 MPa H₂的温和条件下，氮掺杂的介孔碳负载催化剂表现出了优异的催化性能.反应0.5 h，对氯硝基苯可完全转化，且选择性高达99%.相比而言，商业化的Pt/C催化剂上反应的转化率和选择性分别为89%和90%.其它传统催化剂的比较，如Pt/SiO₂，Pt/TiO₂，同样表明，氮掺杂介孔碳负载的催化剂具有更优异的催化性能.在相同反应条件下，Pt/SiO₂催化剂只能得到46%的转化率和93%的选择性，而Pt/TiO₂催化剂虽然能够实现完全转化，但选择性也仅为91%.由此可见，氮掺杂的负载催化剂可大大提高反应活性和选择性，能有效抑制脱氯现象的发生.这种高的催化性能可能与催化剂的介孔结构、氮功能化载体以及超小尺寸的Pt纳米粒子的稳定有关.由于氮原子和介孔孔道的限域作用，氮掺杂介孔碳负载的催化剂也具有良好的催化稳定性，循环使用10次后，催化活性和选择性几乎没有下降.结果表明，循环使用后的催化剂金属粒子尺寸变化不大，进一步表明氮掺杂介孔碳载体对金属纳米颗粒的稳定作用.

关键词:

English

N-doped ordered mesoporous carbon as a multifunctional support of ultrafine Pt nanoparticles for hydrogenation of nitroarenes

a Institute of Molecular Science, Shanxi University, Taiyuan 030006, Shanxi, China;
b School of Chemistry and Chemical Engineering, Shanxi University, Taiyuan 030006, Shanxi, China
Received Date: 27 February 2017
Revised Date: 06 April 2017
Fund Project:
This work was supported by the National Natural Science Foundation of China (201573136, U1510105) and the Scientific Research Start-up Funds of Shanxi University (RSC723).

Abstract: Due to the advantages of high surface areas, large pore volumes and pore sizes, abundant nitrogen content that favored the metal-support interactions, N-doped ordered mesoporous carbons are regarded as a kind of fascinating and potential support for the synthesis of effective supported cat-alysts. Here, a N-doped ordered mesoporous carbon with a high N content (9.58 wt%), high surface area (417 m²/g), and three-dimensional cubic structure was synthesized successfully and used as an effective support for immobilizing Pt nanoparticles (NPs). The positive effects of nitrogen on the metal particle size enabled ultrasmall Pt NPs (about 1.0 ±0.5 nm) to be obtained. Moreover, most of the Pt NPs are homogeneously dispersed in the mesoporous channels. However, using the ordered mesoporous carbon without nitrogen as support, the particles were larger (4.4 ±1.7 nm) and many Pt NPs were distributed on the external surface, demonstrating the important role of the nitrogen species. The obtained N-doped ordered mesoporous material supported catalyst showed excellent catalytic activity (conversion 100%) and selectivity (>99%) in the hydrogenation of halogenated nitrobenzenes under mild conditions. These values are much higher than those achieved using a commercial Pt/C catalyst (conversion 89% and selectivity 90%). This outstanding catalytic perfor-mance can be attributed to the synergetic effects of the mesoporous structure, N-functionalized support, and stabilized ultrasmall Pt NPs. Moreover, such supported catalyst also showed excellent catalytic performance in the hydrogenation of other halogenated nitrobenzenes and nitroarenes. In addition, the stability of the multifunctional catalyst was excellent and it could be reused more than 10 times without significant losses of activity and selectivity. Our results conclusively show that a N-doped carbon support enable the formation of ultrafine metal NPs and improve the reaction ac-tivity and selectivity.

Key words:

1. [1] M. Oh, C. A. Mirkin, Nature, 2005, 438, 651-654.
2. [2] J. Lee, J. Kim, T. Hyeon, Adv. Mater., 2006, 18, 2073-2094.
3. [3] Jesse Q. Bond, D. M. Alonso, D. Wang, R. M. West, James A. Dumesic, Science, 2010, 327, 1110-1114.
4. [4] B. X. Peng, X. G. Yuan, C. Zhao, J. A. Lercher, J. Am. Chem. Soc., 2012, 134, 9400-9405.
5. [5] H. B. Ge, B. Zhang, X. M. Gu, H. J. Liang, H. M. Yang, Z. Gao, J. G. Wang, Y. Qin, Angew. Chem. Int. Ed., 2016, 55, 7081-7085.
6. [6] C. Zhao, J. A. Lercher, Angew. Chem. Int. Ed., 2012, 51, 5935-5940.
7. [7] J. R. Li, X. H. Li, Y. Ding, P. Wu, Chin. J. Catal., 2015, 36, 1995-2003.
8. [8] X. M. Yang, X. N. Wang, J. S. Qiu, Appl. Catal. A, 2010, 382, 131-137.
9. [9] W. Qi, D. S. Su, ACS Catal. 2014, 4,3212-3218
10. [10] L. S. Ott, R. G. Finke, Coord. Chem. Rev., 2007, 251, 1075-1100.
11. [11] J. P. Xiao, X. L. Pan, F. Zhang, H. B. Li, X. H. Bao, Chem. Sci., 2017, 8, 278-283.
12. [12] S. Wang, Q. F. Zhao, H. M. Wei, J. Q. Wang, M. Cho, H. S. Cho, O. Terasaki, Y. Wan, J. Am. Chem. Soc., 2013, 135, 11849-11860.
13. [13] T. Y. Yang, H. J. Ling, J. F. Lamonier, M. Jaroniec, J. Huang, M. J. Monteiro, J. Liu, NPG Asia Mater., 2016, 8, e240.
14. [14] P. P. Yang, Y. Xu, L. Chen, X. X. Wang, Q. Zhang, Langmuir, 2015, 31, 11701-11708.
15. [15] J. Liu, S. Z. Qiao, H. Liu, J. Chen, A. Orpe, D. Y. Zhao, G. Q. Lu, Angew. Chem. Int. Ed., 2011, 50, 5947-5951.
16. [16] Y. Boyjoo, Y. Cheng, H. Zhong, H. Tian, J. Pan, V. K. Pareek, S. P. Jiang, J. Lamonier, M. Jaroniec, J. Liu, Carbon, 2017, 116, 490-499.
17. [17] W. J. Zhu, W. P. Kong, I. Noshadi, L. Zhao, F. J. Liu, Colloids Surf. A, 2014, 444, 314-320.
18. [18] H. Z. Liu, T. Jiang, B. X. Han, S. G. Liang, Y. X. Zhou, Science, 2009, 326, 1250-1252.
19. [19] EƵ. Sípos, G. Fogassy, A. Tungler, P. V. Samant, J. L. Figueiredo, J. Mol. Catal. A, 2004, 212, 245-250.
20. [20] Z. Liu, J. H. Mi, Y. Yang, Y. Song, L. P. Deng, Mater. Lett., 2011, 65, 3548-3551.
21. [21] A. Deshpande, F. Figueras, M. Lakshmi Kantam, K. Jeeva Ratnam, R. Sudarshan Reddy, N. S. Sekhar, J. Catal., 2010, 275, 250-256.
22. [22] X. J. Cui, A. E. Surkus, K. Junge, C. Topf, J. Radnik, C. Kreyenschulte, M. Beller, Nat. Commun., 2016, 7, 11326.
23. [23] X. Xu, Y. Li, Y. T. Gong, P. F. Zhang, H. R. Li, Y. Wang, J. Am. Chem. Soc., 2012, 134, 16987-16990.
24. [24] J. Tang, J. Liu, C. L. Li, Y. Q. Li, M. O. Tade, S. Dai, Y. Yamauchi, An-gew. Chem. In. Ed., 2015, 54, 588-593.
25. [25] R. Liu, S. M. Mahurin, C. Li, R. R. Unocic, J. C. Idrobo, H. Gao, S. J. Pennycook, S. Dai, Angew. Chem. In. Ed., 2011, 50, 6799-6802.
26. [26] G. H. Wang, Z. W. Cao, D. Gu, N. Pfander, A. C. Swertz, B. Spliethoff, H. J. Bongard, C. Weidenthaler, W. Schmidt, N. Pfänder, F. Schuth, R. Rinaldi, Angew. Chem. In. Ed., 2016, 55, 8850-8855.
27. [27] X. M. Ren, H. Li, J. Chen, L. J. Wei, A. Modak, H. Q. Yang, Q. H. Yang, Carbon, 2017, 114, 473-481.
28. [28] J. Wei, D. D. Zhou, Z. K. Sun, Y. H. Deng, Y. Y. Xia, D. Y. Zhao, Adv. Funct. Mater., 2013, 23, 2322-2328.
29. [29] Z. L. Li, J. H. Liu, C. G. Xia, F. W. Li, ACS Catal., 2013, 3, 2440-2448..
30. [30] C. Galeano, J. C. Meier, M. Soorholtz, H. Bongard, C. Baldizzone, K. J. J. Mayrhofer, F. Schüth, ACS Catal., 2014, 4, 3856-3868.
31. [31] W. J. Shi, H. Fan, S. Y. Ai, L. S. Zhu, Sens. Actuat. B, 2015, 221, 1515-1522.
32. [32] Y. Wang, J. Yao, H. R. Li, D. S. Su, M. Antonietti, J. Am. Chem. Soc., 2011, 133, 2362-2365.
33. [33] X. H. Li, M. Antonietti, Chem. Soc. Rev., 2013, 42, 6593-6604.
34. [34] K. K. R. Datta, V. V. Balasubramanian, K. Ariga, T. Mori, A. Vinu, Chem. Eur. J., 2011, 17, 3390-3397.
35. [35] X. H. Li, X. C. Wang, M. Antonietti, Chem. Sci., 2012, 3, 2170-2174.
36. [36] Y. Li, X. Xu, P. F. Zhang, Y. T. Gong, H. R. Li, Y. Wang, RSC Adv., 2013, 3, 10973-10982.
37. [37] P. F. Zhang, Y. T. Gong, H. R. Li, Z. R. Chen, Y. Wang, Nat. Commun., 2013, 4, 1593.
38. [38] Y. Hao, S. Wang, Q. Sun, L. Shi, A. H. Lu, Chin. J. Catal., 2015, 36, 612-619.
39. [39] K. K. R. Datta, B. V. S. Reddy, K. Ariga, A. Vinu, Angew. Chem. In. Ed., 2010, 49, 5961-5965.
40. [40] Y. Yang, G. J. Lan, X. L. Yang, Y. Li, Chin. J. Catal., 2016, 37, 1242-1248.
41. [41] J. Liu, N. P. Wickramaratne, S. Z. Qiao, M. Jaroniec, Nat. Mater., 2015, 14, 763-774.
42. [42] Q. D. Zhao, Q. S. Huo, J. L. Feng, B. F. Chmelka, G. D. Stucky, J. Am. Chem. Soc., 1998, 120, 6024-6036.

扫一扫看文章

计量

PDF下载量: 2
文章访问数: 1219
HTML全文浏览量: 143

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

氮掺杂有序介孔碳负载超小尺寸铂纳米颗粒催化硝基苯类化合物选择加氢

English

N-doped ordered mesoporous carbon as a multifunctional support of ultrafine Pt nanoparticles for hydrogenation of nitroarenes

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

氮掺杂有序介孔碳负载超小尺寸铂纳米颗粒催化硝基苯类化合物选择加氢

English

N-doped ordered mesoporous carbon as a multifunctional support of ultrafine Pt nanoparticles for hydrogenation of nitroarenes

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南： 你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

文章相关

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs