In this study, ZnSnO₃/NiO heterostructures were synthesized using a co-precipitation method followed by an annealing process. The gas-sensitive characteristics of the sensors based on these samples were evaluated. The results indicate that the sensor performance was optimized when the molar ratio of Ni to Zn was 1∶2. Specifically, the response values of the ZnSnO₃/NiO-2-based sensor to 100 μL·L^-1 triethylamine (TEA) gas at 220 ℃ reached 70.6, which were 6.1 times higher than that of the pure ZnSnO₃ based sensor. The findings demonstrate that ZnSnO₃/NiO heterostructures exhibited not only short response and recovery times (1 s/18 s) but also good gas selectivity, repeatability, and long-term stability. The enhanced sensing mechanism has been investigated in detail.

采用气固法制备了磷化钼-碳纳米花(MoP-CFs)，通过简单的超声自组装将C₆₀修饰在MoP-CFs表面，形成范德瓦耳斯异质结。研究其电催化析氢性能发现，C₆₀的修饰能够有效降低电催化析氢过电位。其中，10% C₆₀-MoP-CFs样品(10%为C₆₀的质量分数)表现出最佳催化活性，在酸性和碱性条件下达到10 mA·cm^-2的电流密度时，所需要的过电位分别为158和157 mV，并且具有至少20 h的电催化稳定性。C₆₀与MoP-CFs之间强电子耦合作用促进电子由C₆₀迁移到MoP-CFs表面，有助于减小电荷传输阻力，加快电催化析氢界面反应动力学过程。

聚N-异丙基丙烯酰胺(PNIPAm)交联温敏纳米纤维膜作为一种相变温度易于控制的新兴响应性材料，克服了传统PNIPAm块状水凝胶的生产成本高、响应速率慢和PNIPAm非交联温敏纳米纤维耐水性差的缺点，受到广泛研究并应用于智能开关、温度致动器、水油分离、药物、细胞控制释放和伤口敷料等领域。形貌稳定性和快速响应性是温敏纳米纤维膜在重复体积变化过程中最大的挑战，同时也作为评价PNIPAm温敏纳米纤维膜的实用性最重要指标引起了人们广泛的关注。本文全面综述了PNIPAm温敏纳米纤维膜近二十年来国内外的突破性进展和非交联作用下PNIPAm温敏纳米纤维膜的形貌变化和响应性，重点综合分析了物理和化学交联中交联反应类型、交联度、交联时间和交联分子量对PNIPAm温敏纳米纤维膜的形貌稳定性和响应行为的影响，为之后纤维膜的交联处理提供了理论支持，并对PNIPAm温敏纳米纤维膜的发展及应用前景进行了展望。

Herein, an FMS/CC composite was successfully fabricated by depositing FeMoS₄ onto a pristine carbon fiber cloth (CC) substrate via a facile two-step hydrothermal method. The amorphous nature of the FMS/CC composite endows it with abundant catalytically active sites, thereby accelerating the reduction of I₃^-. More importantly, the dye-sensitized solar cells (DSSCs) prepared by scraping it on flexible titanium mesh with low resistance had low series resistance (R_s). Electrochemical characterizations revealed that the DSSCs employing the FMS/CC counter electrode achieved a power conversion efficiency (PCE) of ca. 9.51% (surpassing the ca. 8.15% efficiency of the Pt counter electrode), open-circuit voltage (V_oc) of ca. 0.79 V, short-circuit current density (J_sc) of ca. 18.31 mA·cm^-2, and fill factor (FF) of ca. 0.65. Moreover, after 100 times of cyclic voltammetry (CV) test, the CV curve remainedunchanged, indicating the excellent stability of FMS/CC in the electrolyte containing I^3-/I^-.

面向化学类(非高分子)专业的高分子化学实验教学发展较为缓慢，亟需紧跟研究前沿，引入新内容。本文总结了近十年的教学改革经验，并以温敏型高分子的制备、溶液性质、光学性能与应用为例，介绍如何通过实验教学内容、实验技术、教学方法等方面的创新，设计符合理科人才培养需求的、契合时代与科学发展的、被学生喜爱与重视的一系列高分子化学实验，以有效解决培养需求与课业负担之间的矛盾，且在不新增开课、课时有限的情况下，加入到化学类专业本科教学体系中，激发学生对学科领域的兴趣，提升学生的探究和创新能力。

基于向大一学生开设的“电解-量气法测定阿伏加德罗常数”实验，设计了Cu₂O的电化学合成及量气法测定阿伏加德罗常数一体化实验，该实验巧妙地融合了元素化学实验中有关Cu₂O的制备及性质实验内容。一次电解完成两个实验，节约电能，节省时间。Cu₂O的电化学合成及量气法测定阿伏加德罗常数一体化实验可作为一个微实验灵活穿插于大学基础化学实验教学中，对于培养大一学生的全方位思考的意识和多角度分析问题的能力以及经济、环保的理念有重要意义。