Two New Coordination Polymers Based on H4BIPA-TC: Syntheses and Fluorescence Sensing for Nitroaromatic Compounds and Fe3+ Ion

Li-Jun ZHAI Chen-Xu JIAO Jin-Fang LIANG Jie ZHANG Xiao-Yan NIU Tuo-Ping HU Yu-Lan NIU

Citation:  Li-Jun ZHAI, Chen-Xu JIAO, Jin-Fang LIANG, Jie ZHANG, Xiao-Yan NIU, Tuo-Ping HU, Yu-Lan NIU. Two New Coordination Polymers Based on H4BIPA-TC: Syntheses and Fluorescence Sensing for Nitroaromatic Compounds and Fe3+ Ion[J]. Chinese Journal of Structural Chemistry, 2020, 39(4): 772-782. doi: 10.14102/j.cnki.0254-5861.2011-2562 shu

Two New Coordination Polymers Based on H4BIPA-TC: Syntheses and Fluorescence Sensing for Nitroaromatic Compounds and Fe3+ Ion

English

  • Coordination polymers (CPs), which stand for a new class of organic-inorganic crystalline hybrid materials, have attracted extensive attention of researchers not only because of their structural diversity and modification, but also of their wide application prospects in the field of gas adsorption[1-4], magnetic properties[5-7], catalysis[8-10], sensors[11-16], etc. At present, luminescent coordination polymers (LCPs) have become one of the research hotspots as fluorescent probes, which have the advantages of fast response, time saving and convenience compared with traditional instrument detection methods, such as X-ray imaging, Raman spectroscopy, ion mobility spectrometry, plasma desorption mass spectrometry, and so on[17-21]. Nitroaromatic compounds are important chemical raw materials and highly toxic pollutants. At the same time, the iron is not only an essential trace element in bodies' metabolic process, but also an important raw material that can not be missed in industrial processes. But their arbitrary discharge and treatment bring about a huge danger to the environment and human health[22]. Therefore, it is very necessary to develop a method for quickly and easily identifying the above substances, and LCPs are one of the promising candidates[23-26]. However, constructing a CP with fluorescent properties is a great challenge because its synthesis depends on many aspects, such as the ligand, central metal ion, temperature, pH, solvent type and reaction time. Among them, the rational choice of ligands and central metal ions is crucial. Because of their π-conjugated rigid rings and distinct electrical properties, 1,4,5,8-naphthalenediimides (NDIs, also called as naphthalene carbodiimides) have been widely used as linkers for efficiently synthesizing LCPs[27]. As for the metal ions, zinc(Ⅱ) and cadmium(Ⅱ) with a d10 electronic configuration were generally chosen because they have good fluorescence characteristics themselves. When the above metal ions are coordinated with an organic ligand with a large conjugated electron system, the antenna effect of the ligand modulates the fluorescent properties of the metal ions, thereby obtaining CPs with excellent fluorescence properties.

    Inspired by the above situation, the NDI-related polycarboxylic acid, 5,5΄-(1,3,6,8-tetraoxobenzo-[lmn][3,8] phenanthrolin-2-7-diyl)bis-1,3-benzenedicarboxylic acid (H4L), has been chosen as linker based on the following reasons: (1) It has a NDI chromophore unit and a large conjugated electron system, which is beneficial to construct CPs with good fluorescence performance; (2) Its rigidity makes it possible to synthesize structurally CPs with stable structure; (3) The carboxylate groups present versatile bonding modes to construct CPs with different structures[28-30]. In addition, its four carbonyl oxygen atoms increase the fluorescent properties of CPs, which in turn contributes to the recognition of metal ions and nitroaromatic compounds.

    In this work, based on the H4L ligand and Zn(Ⅱ)/Cd(Ⅱ), two new CPs of 1 and 2 have been successfully constructed under solvothermal method with the aid of 4,4΄-bis(benzoimidazo-1-yl)biphenyl (4,4΄-bbib)/1,4-bis(imidazol-1-ylmethyl)benzene (1,4-bimb) (Scheme 1). Furthermore, the fluorescent properties of 1 and 2 have been also studied.

    Scheme 1

    Scheme 1.  Ligands used in synthesizing 1 and 2

    H4BIPA-TC and 4,4΄-bbib were purchased from Jinan Henghua Chemical Co., Ltd. (> 99%, AR). Other reagents were purchased from Shanghai Chemical Company and used without further purification. The elemental analyses (C, N and H) were measured on a Vario MACRO analyzer. Powder X-ray diffraction patterns were collected by using a Rigaku D/Max-2500 PC diffractometer with Mo radiation (λ = 0.71073 Å) in the 2θ range of 5~50° at room temperature. IR spectra were carried out on a FTIR-8400s spectrometer in the range of 4000~400 cm-1 in KBr pellets. TG curves were recorded from 25 to 800 ℃ (heating rate of 10 ℃·min-1) on a METTLER TGA analyzer under nitrogen atmosphere. Luminescence experiments were recorded at 25 ℃ on an F-2700 fluorescence spectrophotometer. UV-vis spectroscopy measurements were performed on a Pgeneral TU-1901 in the range of 200~750 nm.

    2.2.1   Synthesis of {[ZnH2L(4,4΄-bibp)]·H2O}n (1)

    A mixture of H4L (1.8 mg, 0.003 mmol), 4,4΄-bibp (1.7 mg, 0.006 mmol), Zn(NO3)2·6H2O (1.8 mg, 0.006 mmol) and HNO3 solution (0.1 mL, 0.15 mol·L-1) was dissolved in 1 mL of H2O/CH3CN (1:1), sealed in a glass tube and heated at 130 ℃ for 3000 min. The mixture was naturally cooled to room temperature, and the resulting crystals were obtained by washing with water and filtration (yield: 37%, based on H4L). Calcd. (%) for C48H30ZnN6O14: C, 59.87; H, 3.12; N, 8.73. Found (%): C, 59.90; H, 3.11; N, 8.77. IR (KBr pellet, cm-1): 3410(m), 3130(m), 2355(m), 1733(m), 1700(s), 1560(m), 1518(m), 1350(s), 1249(s), 1115(m), 1062(m), 920(w), 835(w), 760(m), 655(m), 570(w), 540(w).

    2.2.2   Synthesis of {[CdL0.5(1,4-bimb)0.5(H2O)]·EtOH}n (2)

    H4L (3.0 mg, 0.005 mmol), 1,4-bimb (0.006 mmol, 1.4 mg), Cd(NO3)2·4H2O (0.010 mmol, 3.1 mg), H2O/DMF/EtOH (1 mL, 2:1:1) and HNO3 aqueous solution (0.1 mL, 0.15 mol·L-1) were mixed and placed in a glass tube and heated at 105 ℃ for 3000 min. After that, the mixture was cooled naturally to room temperature, and the resulting crystals were collected by washing with water and filtering (Yield: 28%, based on H4L). Calcd. (%) for C24H20CdN3O8: C, 48.74; H, 3.39; N, 7.11. Found (%): C, 48.66; H, 3.30; N, 7.06. IR (KBr pellet, cm-1): 3539(w), 1684(m), 1656(m), 1560(s), 1518(m), 1344(m), 1250(w), 1110(w), 769(w), 739(w), 655(w), 613(w), 570(w).

    The structural data of 1 and 2 were collected using a Bruker Apex Ⅱ diffractometer using Mo- radiation (λ = 0.71073 Å) at 100 (K). Absorption corrections were carried out using the multiple techniques. The structure was solved by direct methods with SHELXL program and refined by full-matrix least-squares on F2 using the SHELXL packages[31]. The non-hydrogen atoms were refined with anisotropic thermal parameters, and the hydrogen atoms were included in geometric positions. Crystallographic data and structure refinement details are given in Table 1. The selected bond lengths and bond angles of 1 and 2 are summarized in Table S1. The topology of CPs was analyzed by TOPOS 4.0[32].

    Table 1

    Table 1.  Crystallographic Data of Complexes 1 and 2
    DownLoad: CSV
    Complex 1 2
    Empirical formula C48H30ZnN6O14 C24H20CdN3O8
    Formula weight 980.12 590.83
    Temperature/K 100 100
    Crystal system Monoclinic Triclinic
    Space group P21/c $P \overline 1 $
    a (Å) 8.4560(4) 8.2437(4)
    b (Å) 15.1883(7) 10.3267(6)
    c (Å) 32.9959(15) 13.4783(6)
    α (°) 90 92.10
    β (°) 90.8470(10) 91.11
    γ (°) 90 109.4580(10)
    V3) 4237.3(3) 1080.54(10)
    Z 4 2
    ρ (g·cm–3) 1.480 1.816
    μ/mm–1 0.655 1.071
    F(000) 1928.0 594.0
    θ range for data collection (°) 3.004 to 26.343 3.598 to 26.34
    Independent reflections (Rint) 8664 (0.1006) 4412 (0.0599)
    Data/restraints/parameters 8664/0/606 4412/0/326
    GOOF 1.020 1.059
    R, wR (I > 2σ(I)) 0.0520, 0.1137 0.0445, 0.0902
    R, wR (all data) 0.0919, 0.1304 0.0575, 0.0989
    Largest diff. peak/hole (e·Å-3) 0.45/–0.46 1.19/–1.15
    CCDC number 1574250 1574251
    aR = Σ||Fo| – |Fc|/Σ||Fo|, bwR = {[Σw(Fo2Fc2)2w(Fo2)2]}1/2
    3.1.1   Crystal structure of {[ZnH2L(4,4΄-bibp)]·H2O}n (1)

    Complex 1 belongs to the monoclinic system with P21/c space group. There are one crystallographically independent Zn(Ⅱ) ion, one H2L2- ligand, one 4,4΄-bibp and one lattice water in the repeating unit. As exhibited in Fig. 1a, the Zn(Ⅱ) ion is four-coordinated by two O-atoms (O(1), O(4). Symmetry code: ⅰ: –x, 0.5+y, 0.5–z) from two monodentate carboxylate groups of two H2L2- ligands (Zn–O(1) = 1.933(2) Å and Zn–O(4) = 1.950(2) Å) and two N atoms (N(3), N(6). Symmetry code: ⅱ: x, 0.5–y, –0.5+z) of two 4,4΄-bibp (Zn–N(3) = 1.995(3) Å and Zn–N(6) = 2.016(2) Å), adopting a distorted tetrahedral coordination geometry.

    Figure 1

    Figure 1.  (a) Coordination environment of Zn(Ⅱ) in 1; (b) 2D layer structure of 1; (c) Topology of 1 (All hydrogen atoms are omitted for clarity. Symmetry codes: ⅰ: –x, 0.5+y, 0.5–z; ⅱ: x, 0.5–y, –0.5+z; ⅲ: –x, –0.5+y, 0.5–z)

    The H4L ligand in 1 is not fully deprotonated and takes a (к1-к0)-(к1-к0)-μ2 coordination mode, in which both carboxylate groups present the η1 coordinated mode. The H2L2- linkers bridge Zn(Ⅱ) ions to obtain 1D [ZnH2L]n chains (Fig. S1), which interconnect with another 1D chain [Zn(4,4΄-bibp)]n (Fig. S2) formed by 4,4΄-bibp linking with adjacent Zn(Ⅱ) ions to obtain 2D layer structures (Fig. 1b). The 2D layers are further constructed into 3D supramolecular networks by H-bonding interaction (Table S2) between the adjacent 2D layers. Besides, the structure of 1 was strengthened by π···π interactions (Table S3). Topologically, the framework of 1 can be seen as a 2D network with the topology of sql (Fig. 1c).

    3.1.2   Crystal structure of {[ZnH2L(4,4΄-bibp)]·H2O}n (1)

    Complex 2 crystallizes in the triclinic system with space group P$ \overline 1 $. The repeating unit is composed of one Cd(Ⅱ) ion, half a L4- linker, half a 1,4-bimb, a coordination H2O and a lattice EtOH. As exhibited in Fig. 2a, Cd(Ⅱ) ions present the same coordination environment, and each Cd(Ⅱ) ion is hexa-coordinated by four carboxylate O-atoms (O(1), O(2), O(4), O(4). Symmetry code: ⅰ: x, –1+y, z; ⅱ: –x, 1–y, 1–z) of three distinct L4- linkers, one coordination water O-atom (O(1W)), and one N-atom from 1,4-bimb (N(2)), which gives a pseudo-octahedral geometry. The bond lengths of Cd–O vary from 2.279(3) to 2.477(3) Å, and the Cd−N(2) bond length is 2.227(4) Å. The O(1), O(2), O(4) and N(2) atoms occupy the equatorial plane, whereas O1W and O4 lie in the axial vertexes and the bond angle of O(1W)–Cd(1)–O(4) is 169.27(9)º.

    Figure 2

    Figure 2.  (a) Coordination environment of Cd(Ⅱ) in 2; (b) 2D structure of 2; (c) Topology of 2 (All hydrogen atoms are omitted for clarity. Symmetry codes: ⅰ: x, –1+y, z; ⅱ: –x, 1–y, 1–z; ⅲ: –1–x, 1–y, –z; ⅳ: 1–x, –y, 2–z; ⅴ: x, 1+y, z; ⅵ: –x, –y, 1–z; ⅶ: –1–x, –y, –z; ⅷ: 1+x, y, –1+z)

    In complex 2, four carboxylate groups of the H4L linker are fully deprotonated and show two coordinated modes: μ2-η2 and η2, while the H4L linker displays the coordinated mode of (κ1-κ1)-(κ0-κ2)-(κ1-κ1)-(κ0-κ2)-μ4. As presented in Fig. 2b, two carboxylate groups connect with two symmetrydependent Cd(Ⅱ) ions to form [Cd2(COO)2] SBUs with the Cd···Cd separation of 3.674(5) Å. And L4- anions connect four [Cd2(COO)2] SBUs to construct a complicated 2D [Cd2L]n motif (Fig. S3), which expands into a 3D supramolecular network by π···π interaction and H-bonding between the adjacent 2D layers (Table S4 and Table S5). Meanwhile, the auxiliary ligand of 1,4-bimb plays a role of stabilizing the framework.

    Topologically, the network of 2 can be regarded as a 2-nodal (4,6)-c-(32·42·52)(34·44·54·63)-4,6T26 network by denoting organic linkers and [Cd2-(COO)2] SBUs to the 4-c and 6-c nodes, respecttively (Fig. 2c).

    Powder XRD patterns were tested at ambient temperature. As can be seen from Fig. S4, the peak positions of experimental PXRD patterns are consistent with those of the simulated ones, manifesting the high phase purity of CPs 1 and 2. The thermal stability of CPs 1 and 2 was analyzed by TGA. As exhibited in Fig. S5, for 1, the weight loss of 1.75% below 180 ℃ is attributed to the release of one lattice water molecule (calcd. 1.87%), and the framework decomposes above 380 ℃. When the temperature reaches 400 ℃, the organic ligands begin to decompose. The residual weight of 48.02% is attributed to ZnO (calcd. 0.08%) and carbonizing matter containing C, H and N (calcd. 47.94%). For 2, the weight loss of 10.00% belongs to that of one coordinatedH2O molecules and one lattice EtOH molecule (calcd. 10.83%) in the range of 77 to 250 ℃, and the network begins to collapse at about 380 ℃. The second weight loss of 70.9% in the range of 380~800 ℃ is assigned to the removal of half of H4L and half of 1,4-bimbligand (calcd.: 70.4%). The residue of 19.5% results from CdO (calcd.: 20.7 %). IR spectra of CPs 1 and 2 are also employed to confirm the characteristic functional groups of ligands in the framework (Fig. S6).

    3.3.1   Fluorescent sensing of organic solvent molecules and nitroaromatic compounds

    The solid-state fluorescence emission spectra of CPs 1 and 2 and free H4L ligand were measured under room temperature. As shown in Fig. S7, the free H4L ligand exhibits a strong emission peak at 475 nm (λex = 350 nm), which can be explained by the π-π* transitions of the benzene rings. The emission spectra of 1 and 2 exhibit strong peaks at 425 nm (λex = 350 nm) and 387 (λex = 320 nm), respectively. Compared with the free H4L ligand, the emission peaks of CPs show slight blue-shifts (Δ = 50 nm for CP 1 and Δ = 88 nm for CP 2), which can be ascribed to the metal-ligand coordinative interactions.

    Recently, the potential applications of LCPs for the sensing of small organic molecules have attracted a great interest of researchers because of their high sensitivity. Here, fluorescence sensing properties of CPs 1 and 2 for different solvents, including DMF, DMSO, EtOH, CH3CN, H2O, N-butylalcohol and nitrobenzene (NB) were carried out. 2 mg complex sample was dispersed in 2 mL diverse solvents by stirring for 30 minutes to form a uniform suspension. As can be seen form Fig. S8 that the order of fluorescence intensity is 1@DMF > 1@EtOH > 1@n-butanol > 1@H2O > 1@CH3CN > 1@DMSO > 1@NB, and 2@DMF > 2@CH3CN > 2@DMSO > 2@EtOH > 2@H2O > 2@n-butanol > 2@NB. The fluorescence intensity of 1 and 2 suspensions depends on different solvents. Furthermore, the different order of fluorescence intensity of CPs 1 and 2 suspensions may be owing to their structural differences. By structural comparison, complex 1 exhibits a 3D supramolecular network formed by H-bonding interaction between the adjacent 2D layers.

    Both 1 and 2 display the strongest and weakest fluorescent intensity in DMF and NB, respectively. The quenching of NB to CPs΄ fluorescence encouraged us to further explore the potential of 1 and 2 for sensing other nitroaromatic compounds (NACs). Four different NACs were chosen as the analytes, including 4-nitrotoluene (NT), 4-nitrophenol (NP), nitrobenzene (NB) and 4-nitroaniline (NA). Fluorescence titration experiments are carried out under same conditions.

    As shown in Fig. 3, all NACs analytes display different quenching effects for the suspensions of 1 and 2. The quenching percentage (QP) was calculated by the equation[33-35]: (QP) = (I0I)/I0 $ \times $100%, in which I0 and I are the fluorescence intensity of the suspensions without and with the addition of NACs, respectively. When the concentration of NACs in the suspensions is up to 0.05 mM, the QP values are listed in Table 2 and quenching efficiency of 1 and 2 for NACs both are NP > NT > NA > NB. Stern-Volmer (SV) equation can be used to calculate the quenching constants (Ksv)[36], (I0/I) = Ksv [A] + 1, and [A] is the molar concentration of analyte. As presented in Fig. 4 and Fig. S9-S15, the SV curves are almost linear at lower concentrations, and the curves show a bend upwards with the concentration increase, which could show the coexistence of static and dynamic quenching[37]. Ksv values were obtained directly at low concentrations (insets of Fig. 4b, and S9b-S15b) and listed in Table 2. Compared to the previously reported CPs[38, 39], 1 and 2 have high sensitive detection for some NACs. PXRD patterns of CPs used and the original ones match well (Fig. S4), indicating that CPs΄ framework remains unchanged in the process of sensing NACs. The fluorescence quenching mechanisms of NACs for CPs are contributed to the following aspects: (1) The fluorescence resonance energy transfer (FRET)[40-42]. The resonance energy transfer significantly depends on whether the emission band of CPs and the absorption band of analyte can overlap. To verify whether RET exists or not, the UV-Vis spectra of all NACs were collected (Fig. S16). The excitation spectra of all NACs overlap partially with the emission spectra of 1 and 2; (2) The interaction (H-bonding) between NACs and the uncoordinated carbonyl O-atoms of the framework is partly responsible for the fluorescence quenching[43-45].

    Figure 3

    Figure 3.  Percentage of fluorescence quenching of different NACs for 1 and 2

    Table 2

    Table 2.  QP Values and Ksv for 1 and 2
    DownLoad: CSV
    CPs Analyte QP values Ksv (M−1)
    1 NT 97.89% 1.70 × 105
    NP 94.52% 1.12 × 105
    NA 91.14% 6.11 × 104
    NB 81.69% 6.03 × 104
    2 NT 97.58% 2.60 × 105
    NP 91.96% 9.66 × 104
    NA 91.00% 1.82 × 105
    NB 77.31% 4.71 × 104

    Figure 4

    Figure 4.  (a) Concentration-dependent fluorescence intensities of 1 by the addition of NP in H2O (1 mM). Inset: Sterne-Volmer plot of I0/I versus the NP concentration. (b) Quenching efficiency of NP for 1
    3.3.2   Sensing of the cations

    The high stability of 1 and 2 in various solvents prompted us to record the fluorescent response of CPs 1 and 2 to various metal ions. 2 mg complex sample was dispersed in 2 mL M(NO3)n aqueous solutions (1 × 10−2 mol·L−1, M = Ba2+, Pb2+, Mg2+, K+, Na+, Ca2+, Mn2+, Zn2+, Cd2+, Ni2+, Al3+, Ag+, Co2+, Cr3+, Fe3+) by agitation for 30 mins to obtain a homogeneous suspension. As shown in Figs. 5 and 6, the quenching effect of Fe3+ towards CPs΄ fluorescence is very obvious, and other metal ions present the difference of fluorescence intensity compared with the blank aqueous solutions.

    Figure 5

    Figure 5.  Fluorescence intensity of 1 in different cationic in H2O solutions

    Figure 6

    Figure 6.  Fluorescence intensity of 2 in different cationic in H2O solutions

    Moreover, to determine the sensitivity, the Fe(NO3)3 aqueous solution with the concentrations of 0~0.075 mM was gradually added into the suspension of 1 and 2 (2 mg). As shown in Fig. 7, the fluorescence intensities of CPs are weakened step by step with the addition of Fe(NO3)3 solution. The quenching curves can be fitted by the SV equation, and show good linearity at lower concentrations from 0 to 0.02 mM (Fig. S17). Ksv values of Fe3+ ion are calculated to be 1.48 × 102 M−1 (1) and 64.4 M−1 (2), which are comparable to other reported luminescent sensors for detecting Fe3+ ion[46]. In addition, as shown in Fig. S18, the luminescence intensity of the suspension decreased to some extent with the addition of Fe3+ ions into CPs@H2O in the presence of other ions, which proves that CPs have excellent anti-interference capability for sensing Fe3+ ions. PXRD patterns of CPs after sensing experiments are in line with those of the simulated ones, showing that the frameworks of CPs are unchanged (Fig. S4). Meanwhile, it is obvious that the quenching effect of Fe3+ to 1 is superior to that of 2, which may be due to the competition absorption between Fe3+ and 1 higher than that between Fe3+ and 2. The quenching mechanism of Fe3+ ions towards 1 and 2 is owing to electronic transfer from the donors (oxygen atoms of ligand) to acceptors (Fe3+) and ligand-to-metal charge transfer (LMCT)[47]. Furthermore, energy migration is also the partial reason of the fluorescence quenching[48].

    Figure 7

    Figure 7.  Concentration-dependent fluorescence intensities of 1 and 2 by the addition of Fe3+ in H2O solutions

    In summary, based on H4L and 4,4΄-bibp/1,4-bimb, two new 2D CPs have successfully been obtained and characterized by EA, single-crystal X-ray diffraction, PXRD and IR. Complex 1 is a 3D supramolecular network with the topology of sql, and complex 2 exhibits a 2-nodal (4,6)-c framework with the topology of (32·42·52)(34·44·54·63)-4,6T26. Fluorescence properties indicated 1 and 2 have high sensitivity and selectivity for the recognition of NACs and Fe3+ ion.


    ACKNOWLEDGEMENT: The authors gratefully acknowledge the support of innovative research team of inorganic-organic hybrid functional materials in North University of China.
    1. [1]

      Sun, Y. H.; Han, H. A novel 3D AgI cationic metal-organic framework based on 1,2,4,5-tetra(4-pyridyl)benzene with selective adsorption of CO2 over CH4, H2O over C2H5OH, and trapping Cr2O72–. J. Mol. Struct. 2019, 1194, 73–77. doi: 10.1016/j.molstruc.2019.05.070

    2. [2]

      Dias, H. R.; Diyabalanage, H. V.; Ghimire, M. M.; Hudson, J. M.; Parasar, D.; Gamage, C. S. P.; Omary, M. A. Brightly phosphorescent tetranuclear copper(Ⅰ) pyrazolates. Dalton Trans. 2019, 48, 14979–14983. doi: 10.1039/C9DT03402A

    3. [3]

      Cheng, S.; Wu, Y. L.; Jin, J.; Liu, J.; Wu, D.; Yang, G. P.; Wang, Y. Y. New multifunctional 3D porous metal-organic framework with selective gas adsorption, efficient chemical fixation of CO2 and dye adsorption. Dalton Trans. 2019, 48, 7612–7618. doi: 10.1039/C9DT01249D

    4. [4]

      Gao, L. L.; Zhang, J.; Zhai, L. J.; Wang, X. Q.; Hu, T. P. Gas adsorption and fluorescent sensing properties of two porous lanthanide metal-organic frameworks based on 3,5-bis(2-carboxy-phenoxy)-benzoic acid. Polyhedron. 2019, 165, 171–176. doi: 10.1016/j.poly.2018.12.015

    5. [5]

      Holub, J.; Santoro, A.; Lehn, J. M. Electronic absorption and emission properties of bishydrazone [2×2] metallosupramolecular grid-type architectures. Inorg. Chim. Acta. 2019, 494, 223–231. doi: 10.1016/j.ica.2019.05.017

    6. [6]

      Mocanu, T.; Kiss, L.; Sava, A.; Shova, S.; Silvestru, C.; Andruh, M. Coordination polymers and supramolecular solid-state architectures constructed from an organometallic tecton, bis(4-pyridyl) mercury. Polyhedron. 2019, 166, 7–16. doi: 10.1016/j.poly.2019.03.020

    7. [7]

      Xia, Q. Y.; Feng, M. Y.; Ma, D. X.; Shi, S. M.; Xie, Y. C.; Tian, W.; Shi, H. J.; Wang, Q. L.; Wang, W. M. Structures, luminescent properties and magnetic refrigeration of two series of Ln2 compounds. Polyhedron. 2019, 166, 141–145. doi: 10.1016/j.poly.2019.03.040

    8. [8]

      Li, Z. H.; Xue, L. P.; Qin, Q. P.; Zhang, J.; Wang, J. M.; Zhang, X. Y.; Zhao, B. T. A zinc(Ⅱ) coordination polymer material with Lewis basic pyridyl sites: structure, photoluminescence, and heterogeneous catalysis. J. Solid State Chem. 2019, 274, 81–85. doi: 10.1016/j.jssc.2019.03.020

    9. [9]

      Pandey, S.; Kumar, G.; Gupta, R. Postfunctionalized metalloligand-based catenated coordination polymers: syntheses, structures, and effect of labile sites on catalysis. Cryst. Growth Des. 2019, 19, 2723–2735. doi: 10.1021/acs.cgd.8b01848

    10. [10]

      Chen, D. M.; Wu, X. F.; Liu, Y. J.; Huang, C.; Zhu, B. X. Synthesis, crystal structures and vapor adsorption properties of Hg(Ⅱ) and Cd(Ⅱ) coordination polymers derived from two hydrazone Schiff base ligands. Inorg. Chim. Acta. 2019, 494, 181–186. doi: 10.1016/j.ica.2019.05.026

    11. [11]

      Zhang, J.; Gao, L. L.; Wang, Y.; Zhai, L. J.; Wang, X. Q.; Niu, X. Y.; Hu, T. P. Fluorescence sensing and magnetic properties of three coordination polymers based on 6-(3,5-dicarboxylphenyl)nicotinic acid and pyridine/imidazole linkers. New J. Chem. 2019, 43, 9376–9383. doi: 10.1039/C9NJ00682F

    12. [12]

      Zhang, J.; Gao, L. L.; Wang, Y.; Zhai, L. J.; Wang, X. Q.; Hu, T. P. Two trinuclear cluster-based 3D interpenetrated metal-organic frameworks with selective adsorption and antiferromagnetic properties. J. Solid State Chem. 2019, 271,303–308. doi: 10.1016/j.jssc.2019.01.003

    13. [13]

      Zhang, J.; Gao, L. L.; Wang, Y.; Zhai, L. J.; Wang, X. Q.; Niu, X. Y.; Hu, T. P. Luminescent and magnetic properties of two novel coordination polymers based on N-heterocyclic carboxylic acid. J. Solid State Chem. 2019, 277, 356–362. doi: 10.1016/j.jssc.2019.06.030

    14. [14]

      Zhang, J.; Gao, L. L.; Wang, Y.; Zhai, L. J.; Niu, X. Y.; Hu, T. P. A bifunctional 3D Tb-based metal-organic framework for sensing and removal of antibiotics in aqueous medium. CrystEngComm. 2019, 21, 7286–7292. doi: 10.1039/C9CE01303B

    15. [15]

      Zhang, J.; Gao, L. L.; Zhai, L. J.; Wang, X. Q.; Fan, L. M.; Hu, T. P. Gas adsorption, magnetic, and fluorescent sensing properties of four coordination polymers based on 1,3,5-tris(4-carbonylphenyloxy) benzene and bis(imidazole) linkers. CrystEngComm. 2018, 20, 7666–7676. doi: 10.1039/C8CE01421C

    16. [16]

      Xiao, Q. Q.; Liu, D.; Wei, Y. L.; Cui, G. H. A new multifunctional two-dimensional cobalt(Ⅱ) metal-organic framework for electrochemical detection of hydrogen peroxide, luminescent sensing of metal ions, and photocatalysis. Polyhedron 2019, 158, 342–351. doi: 10.1016/j.poly.2018.11.016

    17. [17]

      Luggar, R. D.; Farquharson, M. J.; Horrocks, J. A.; Lacey, R. J. X-ray Spectrom. 1998, 27, 87. doi: 10.1002/(SICI)1097-4539(199803/04)27:2<87::AID-XRS256>3.0.CO;2-0

    18. [18]

      Wang, R.; Zhang, M.; Liu, X.; Zhang, L.; Kang, Z.; Wang, W.; Sun, D. Tuning the dimensionality of interpenetration in a pair of framework-catenation isomers to achieve selective adsorption of CO2 and fluorescent sensing of metal ions. Inorg. Chem. 2015, 54,6084–6086. doi: 10.1021/acs.inorgchem.5b00934

    19. [19]

      Wang, W.; Yang, J.; Wang, R.; Zhang, L.; Yu, J.; Sun, D. Luminescent terbium-organic framework exhibiting selective sensing of nitroaromatic compounds (NACs). Cryst. Growth Des. 2015, 15, 2589–2592. doi: 10.1021/acs.cgd.5b00381

    20. [20]

      Anferov, V. P.; Mozjoukhine, G. V.; Fisher, R. Pulsed spectrometer for nuclear quadrupole resonance for remote detection of nitrogen in explosives. Rev. Sci. Instrum. 2000, 71, 1656–1659. doi: 10.1063/1.1150514

    21. [21]

      Ren, G. H.; Gao, L. L.; Wang, X. Q.; Hu, T. P. Highly fluorescent selectivity of two Cd(Ⅱ) coordination networks with active sites for nitroaromatic compounds and Fe3+ and Hg2+. Inorg. Chim. Acta 2018, 471, 746–753. doi: 10.1016/j.ica.2017.12.018

    22. [22]

      Dallas, P.; Rašović, I.; Puchtler, T.; Taylor, R. A.; Porfyrakis, K. Long Stokes Shifts and vibronic couplings in perfluorinated polyanilines. Chem. Commun. 2017, 53, 2602–2605. doi: 10.1039/C7CC00471K

    23. [23]

      Hu, Y.; Ding, M.; Liu, X. Q.; Sun, L. B.; Jiang, H. L. Rational synthesis of an exceptionally stable Zn(Ⅱ) metal-organic framework for the highly selective and sensitive detection of picric acid. Chem. Commun. 2016, 52, 5734–5737. doi: 10.1039/C6CC01597B

    24. [24]

      Bogale, R. F.; Ye, J.; Sun, Y.; Sun, T.; Zhang, S.; Rauf, A.; Hang, C.; Tian, P.; Ning, G. Highly selective and sensitive detection of metal ions and nitroaromatic compounds by an anionic europium(Ⅲ) coordination polymer. Dalton Trans. 2016, 45, 11137–11144. doi: 10.1039/C6DT01636G

    25. [25]

      Xu, H.; Hu, H. C.; Cao, C. S.; Zhao, B. Lanthanide organic framework as a regenerable luminescent probe for Fe3+. Inorg. Chem. 2015, 54,4585–4587. doi: 10.1021/acs.inorgchem.5b00113

    26. [26]

      Xu, H.; Cao, C. S.; Kang, X. M.; Zhao, B. Lanthanide-based metal-organic frameworks as luminescent probes. Dalton Trans. 2016, 45, 18003–18017. doi: 10.1039/C6DT02213H

    27. [27]

      Pan, M.; Lin, X. M.; Li, G. B.; Su, C. Y. Progress in the study of metal-organic materials applying naphthalene diimide (NDI) ligands. Coord. Chem. Rev. 2011, 255(15–16), 1921–1936.

    28. [28]

      Li, D. S.; Zhang, P.; Zhao, J.; Fang, Z. F.; Du, M.; Zou, K.; Mu, Y. Q. Two unique entangling Cd-coordination frameworks constructed by square Cd4-building blocks and auxiliary N, N΄-donor ligands. Cryst. Growth Des. 2012, 12, 1697–1702. doi: 10.1021/cg300036y

    29. [29]

      Li, D. S.; Wu, Y. P.; Zhao, J.; Zhang, J.; Lu, J. Y. Metal-organic frameworks based upon non-zeotype 4-connected topology. Coord. Chem. Rev. 2016, 261, 1–27.

    30. [30]

      Pang, L. Y.; Yang, G. P.; Jin, J. C.; Kang, M.; Fu, A. Y.; Wang, Y. Y.; Shi, Q. Z. A rare L1D + R1D → 3D luminescent dense polymer as multifunctional sensor to nitro aromatic compounds, Cu2+, and bases. Cryst. Growth Des. 2014, 14, 2954–2961. doi: 10.1021/cg5002418

    31. [31]

      Sheldrick, G. M. SHELXL-97, Germany 1997.

    32. [32]

      Blatov, V. A. Nanocluster analysis of intermetallic structures with the program package TOPOS. Struct. Chem. 2012, 23, 955. doi: 10.1007/s11224-012-0013-3

    33. [33]

      Wang, X. X.; Wang, X. Q.; Niu, X. Y.; Hu, T. P. Three novel metal-organic frameworks based on an unsymmetrical rigid carboxylate ligand for luminescence sensing of nitrobenzene derivatives and magnetic properties. CrystEngComm. 2016, 18, 7471–7477. doi: 10.1039/C6CE01457G

    34. [34]

      Sohn, H.; Sailor, M. J.; Magde, D.; Trogler, W. C. Detection of nitroaromatic explosives based on photoluminescent polymers containing metalloles. J. Am. Chem. Soc. 2003, 125, 3821–3830. doi: 10.1021/ja021214e

    35. [35]

      Gole, B.; Shanmugaraju, S.; Bar, A. K.; Mukherjee, P. S. Supramolecular polymer for explosives sensing: role of H-bonding in enhancement of sensitivity in the solid state. Chem. Commun. 2011, 47, 10046–10048. doi: 10.1039/c1cc13925h

    36. [36]

      Dalapati, S.; Jin, S.; Gao, J.; Xu, Y.; Nagai, A.; Jiang, D. An azine-linked covalent organic framework. J. Am. Chem. Soc. 2013, 135, 17310–17313. doi: 10.1021/ja4103293

    37. [37]

      Ganguly, A.; Paul, B. K.; Ghosh, S.; Kar, S.; Guchhait, N. Selective fluorescence sensing of Cu(Ⅱ) and Zn(Ⅱ) using a new Schiff base-derived model compound: naked eye detection and spectral deciphering of the mechanism of sensory action. Analyst 2013, 138, 6532–6541. doi: 10.1039/c3an00155e

    38. [38]

      Liu, J.; Zhong, Y.; Lu, P.; Hong, Y.; Lam, W. Y.; Faisal, M.; Yu, Y.; Wong, K. S.; Tang, B. Z. A superamplification effect in the detection of explosives by a fluorescent hyperbranched poly(silylenephenylene) with aggregation-enhanced emission characteristics. Poly. Chem. 2010, 1,426–429. doi: 10.1039/C0PY00046A

    39. [39]

      Dai, Y.; Zhou, H.; Song, X. D.; Zhang, J. J.; Hao, C.; Di, L.; Wang, Y. X.; Ni, J.; Wang, H. L. Two (5,5)-connected isomeric frameworks as highly selective and sensitive photoluminescent probes of nitroaromatics. CrystEngComm. 2017, 19, 2786–2794. doi: 10.1039/C7CE00236J

    40. [40]

      Gong, W. J.; Ren, Z. G.; Li, H. X.; Zhang, J. G.; Lang, J. P. Cadmium(Ⅱ) coordination polymers of 4-pyr-poly-2-ene and carboxylates: construction, structure, and photochemical double [2+2] cycloaddition and luminescent sensing of nitroaromatics and mercury(Ⅱ) ions. Cryst. Growth Des. 2017, 17, 870–881. doi: 10.1021/acs.cgd.6b01728

    41. [41]

      Rachuri, Y.; Parmar, B.; Bisht, K. K.; Suresh, E. Mixed ligand two dimensional Cd(Ⅱ)/Ni(Ⅱ) metal organic frameworks containing dicarboxylate and tripodal N-donor ligands: Cd(Ⅱ) MOF is an efficient luminescent sensor for detection of picric acid in aqueous media. Dalton Trans. 2016, 45, 7881–7892. doi: 10.1039/C6DT00753H

    42. [42]

      Nagarkar, S. S.; Desai, A. V.; Samanta, P.; Ghosh, S. K. Aqueous phase selective detection of 2, 4,6-trinitrophenol using a fluorescent metal-organic framework with a pendant recognition site. Dalton Trans. 2019, 44, 15175–15180.

    43. [43]

      Gole, B.; Bar, A. K.; Mukherjee, P. S. Modification of extended open frameworks with fluorescent tags for sensing explosives: competition between size selectivity and electron deficiency. Chem. Eur. J. 2014, 20, 2276–2291. doi: 10.1002/chem.201302455

    44. [44]

      Nagarkar, S. S.; Joarder, B.; Chaudhari, A. K.; Mukherjee, S.; Ghosh, S. K. Highly selective detection of nitro explosives by a luminescent metal-organic framework. Angew. Chem. Int. Ed. 2013, 52, 2881–2885. doi: 10.1002/anie.201208885

    45. [45]

      Wang, H. J.; Cheng, F. J.; Zou, C. C.; Li, Q. Q.; Hua, Y. Y.; Duan, J. G. Design and synthesis of luminescent porous coordination polymers for chromaticity modulation, sensing of nitrobenzene and iodine encapsulation. CrystEngComm. 2016, 18, 5639–5646. doi: 10.1039/C6CE00960C

    46. [46]

      Wei, X. J.; Liu, D.; Li, Y. H.; Cui, G. H. New 2D and 3D Cd(Ⅱ) coordination polymers from aromatic dicarboxylate and 1,3-bis(5, 6-dimethylbenzimidazol-1-yl)-2-propanol ligands: syntheses, structures, photocatalytic, and luminescence sensing properties. J. Solid State Chem. 2019, 272, 138–147. doi: 10.1016/j.jssc.2019.02.011

    47. [47]

      Zhao, J.; Wang, Y. N.; Dong, W. W.; Wu, Y. P.; Li, D. S.; Zhang, Q. C. A robust luminescent Tb(Ⅲ)-MOF with Lewis basic pyridyl sites for the highly sensitive detection of metal ions and small molecules. A robust luminescent Tb(Ⅲ)-MOF with Lewis basic pyridyl sites for the highly sensitive detection of metal ions and small molecules. Inorg. Chem. 2016, 55, 3265–3271. doi: 10.1021/acs.inorgchem.5b02294

    48. [48]

      Hou, B. L.; Tian, D.; Liu, J.; Dong, L. Z.; Li, S. L.; Li, D. S.; Lan, Y. Q. A water-stable metal-organic framework for highly sensitive and selective sensing of Fe3+ ion. Inorg. Chem. 2016, 55, 10580–10586. doi: 10.1021/acs.inorgchem.6b01809

  • Scheme 1  Ligands used in synthesizing 1 and 2

    Figure 1  (a) Coordination environment of Zn(Ⅱ) in 1; (b) 2D layer structure of 1; (c) Topology of 1 (All hydrogen atoms are omitted for clarity. Symmetry codes: ⅰ: –x, 0.5+y, 0.5–z; ⅱ: x, 0.5–y, –0.5+z; ⅲ: –x, –0.5+y, 0.5–z)

    Figure 2  (a) Coordination environment of Cd(Ⅱ) in 2; (b) 2D structure of 2; (c) Topology of 2 (All hydrogen atoms are omitted for clarity. Symmetry codes: ⅰ: x, –1+y, z; ⅱ: –x, 1–y, 1–z; ⅲ: –1–x, 1–y, –z; ⅳ: 1–x, –y, 2–z; ⅴ: x, 1+y, z; ⅵ: –x, –y, 1–z; ⅶ: –1–x, –y, –z; ⅷ: 1+x, y, –1+z)

    Figure 3  Percentage of fluorescence quenching of different NACs for 1 and 2

    Figure 4  (a) Concentration-dependent fluorescence intensities of 1 by the addition of NP in H2O (1 mM). Inset: Sterne-Volmer plot of I0/I versus the NP concentration. (b) Quenching efficiency of NP for 1

    Figure 5  Fluorescence intensity of 1 in different cationic in H2O solutions

    Figure 6  Fluorescence intensity of 2 in different cationic in H2O solutions

    Figure 7  Concentration-dependent fluorescence intensities of 1 and 2 by the addition of Fe3+ in H2O solutions

    Table 1.  Crystallographic Data of Complexes 1 and 2

    Complex 1 2
    Empirical formula C48H30ZnN6O14 C24H20CdN3O8
    Formula weight 980.12 590.83
    Temperature/K 100 100
    Crystal system Monoclinic Triclinic
    Space group P21/c $P \overline 1 $
    a (Å) 8.4560(4) 8.2437(4)
    b (Å) 15.1883(7) 10.3267(6)
    c (Å) 32.9959(15) 13.4783(6)
    α (°) 90 92.10
    β (°) 90.8470(10) 91.11
    γ (°) 90 109.4580(10)
    V3) 4237.3(3) 1080.54(10)
    Z 4 2
    ρ (g·cm–3) 1.480 1.816
    μ/mm–1 0.655 1.071
    F(000) 1928.0 594.0
    θ range for data collection (°) 3.004 to 26.343 3.598 to 26.34
    Independent reflections (Rint) 8664 (0.1006) 4412 (0.0599)
    Data/restraints/parameters 8664/0/606 4412/0/326
    GOOF 1.020 1.059
    R, wR (I > 2σ(I)) 0.0520, 0.1137 0.0445, 0.0902
    R, wR (all data) 0.0919, 0.1304 0.0575, 0.0989
    Largest diff. peak/hole (e·Å-3) 0.45/–0.46 1.19/–1.15
    CCDC number 1574250 1574251
    aR = Σ||Fo| – |Fc|/Σ||Fo|, bwR = {[Σw(Fo2Fc2)2w(Fo2)2]}1/2
    下载: 导出CSV

    Table 2.  QP Values and Ksv for 1 and 2

    CPs Analyte QP values Ksv (M−1)
    1 NT 97.89% 1.70 × 105
    NP 94.52% 1.12 × 105
    NA 91.14% 6.11 × 104
    NB 81.69% 6.03 × 104
    2 NT 97.58% 2.60 × 105
    NP 91.96% 9.66 × 104
    NA 91.00% 1.82 × 105
    NB 77.31% 4.71 × 104
    下载: 导出CSV
  • 加载中
计量
  • PDF下载量:  3
  • 文章访问数:  607
  • HTML全文浏览量:  25
文章相关
  • 发布日期:  2020-04-01
  • 收稿日期:  2019-08-06
  • 接受日期:  2020-01-14
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

/

返回文章