English

Single-Molecule Field-Effect Transistors with Graphene Electrodes and Covalent Pyrazine Linkers

• Hantao Sun ^{1, 2,} ,
• Jianhui Liao ^{1, ,} ,
• Shimin Hou ^{1, 2, ,}

• 1.

  Key Laboratory for the Physics and Chemistry of Nanodevices, Department of Electronics, Peking University, Beijing 100871, China

• 2.

  Centre for Nanoscale Science and Technology, Peking University, Beijing 100871, China

Corresponding author: Jianhui Liao, smhou@pku.edu.cn Shimin Hou, jianhui.liao@pku.edu.cn

• Received Date: 05 June 2019
  Accepted Date: 20 June 2019
  Revised Date: 18 June 2019
  Available Online: 15 October 2021
• Fund Project:

Abstract: In single-molecule junctions, anchoring groups that connect the central molecule to the electrodes have profound effects on the mechanical and electrical properties of devices. The mechanical strength of the anchoring groups affects the device stability, while their electronic coupling strength influences the junction conductance and the conduction polarity. To design and fabricate high-performance single-molecule devices with graphene electrodes, it is highly desirable to explore robust anchoring groups that bond the central molecule to the graphene electrodes. Condensation of ortho-phenylenediamine terminated molecules with ortho-quinone moieties at the edges of graphene generates graphene-conjugated pyrazine units that can be employed as anchoring groups for the construction of molecular junctions with graphene electrodes. In this study, we investigated the fabrication and electrical characterization of single-molecule field-effect transistors (FETs) with graphene as the electrodes, pyrazine as the anchoring groups, and a heavily doped silicon substrate as the back-gate electrode. Graphene nano-gaps were fabricated by a high-speed feedback-controlled electro-burning method, and their edges were fully oxidized; thus, there were many ortho-quinone moieties at the edges. After the deposition of phenazine molecules with ortho-phenylenediamine terminals at both ends, a large current increase was observed, indicating that molecular junctions were formed with covalent pyrazine anchoring groups. The yield of the single-molecule devices was as high as 26%, demonstrating the feasibility of pyrazine as an effective anchoring group for graphene electrodes. Our electrical measurements show that the ten fabricated devices exhibited a distinct gating effect when a back-gate voltage was applied. However, the gate dependence of the conductance varied considerably from device to device, and three types of different gate modulation behaviors, including p-type, ambipolar, and n-type conduction, were observed. Our observations can be understood using a modified single-level model that takes into account the linear dispersion of graphene near the Dirac point; the unique band structure of graphene and the coupling strength of pyrazine with the graphene electrode both crucially affect the conduction polarity of single-molecule FETs. When the coupling strength of pyrazine with the graphene electrode is weak, the highest occupied molecular orbital (HOMO) of the central molecule dominates charge transport. Depending on the gating efficiencies of the HOMO level and the graphene states, devices can exhibit p-type or ambipolar conduction. In contrast, when the coupling is strong, the redistribution of electrons around the central molecule and the graphene electrodes leads to a realignment of the molecular levels, resulting in the lowest unoccupied molecular orbital (LUMO)-dominated n-type conduction. The high yield and versatility of the pyrazine anchoring groups are beneficial for the construction of single-molecule devices with graphene electrodes.

Key words:
• Molecular electronics
•  /  Graphene electrode
•  /  Pyrazine anchoring group
•  /  Single-molecule field-effect transistor
•  /  Coupling strength

• 1. [1]

     Sun, L.; Diaz-Fernandez, Y. A.; Gschneidtner, T. A.; Westerlund, F.; Lara-Avila, S.; Moth-Poulsen, K. Chem. Soc. Rev. 2014, 43 (21), 7378. doi: 10.1039/C4CS00143E

  2. [2]

     Su, T. A.; Neupane, M.; Steigerwald, M. L.; Venkataraman, L.; Nuckolls, C. Nat. Rev. Mater. 2016, 1, 16002. doi: 10.1038/natrevmats.2016.2

  3. [3]

     Jia, C.; Guo, X. Chem. Soc. Rev. 2013, 42, 5642. doi: 10.1039/C3CS35527F

  4. [4]

     Xin, N.; Guan, J.; Zhou, C.; Chen, X.; Gu, C.; Li, Y.; Ratner, M. A.; Nitzan, A.; Stoddart, J. F.; Guo, X. Nat. Rev. Phys. 2019, 1, 211. doi: 10.1038/s42254-019-0022-x

  5. [5]

     Metzger, R. M. Chem. Rev. 2015, 115, 5056. doi: 10.1021/cr500459d

  6. [6]

     Xiang, D.; Wang, X.; Jia, C.; Lee, T.; Guo, X. Chem. Rev. 2016, 116, 4318. doi: 10.1021/acs.chemrev.5b00680

  7. [7]

     Strachan, D. R.; Smith, D. E.; Fischbein, M. D.; Johnston, D. E.; Guiton, B. S.; Drndić, M.; Bonnell, D. A.; Johnson, A. T. Nano Lett. 2006, 6, 441. doi: 10.1021/nl052302a

  8. [8]

     O'Neill, K.; Osorio, E. A.; van der Zant, H. S. J. Appl. Phys. Lett. 2007, 90, 133109. doi: 10.1063/1.2716989

  9. [9]

     Perrin, M. L.; Burzuri, E.; van der Zant, H. S. Chem. Soc. Rev. 2015, 44, 902. doi: 10.1039/C4CS00231H

  10. [10]

      Jia, C.; Ma, B.; Xin, N.; Guo, X. Acc. Chem. Res. 2015, 48, 2565. doi: 10.1021/acs.accounts.5b00133

  11. [11]

      Prins, F.; Barreiro, A.; Ruitenberg, J. W.; Seldenthuis, J. S.; Aliaga-Alcalde, N.; Vandersypen, L. M.; van der Zant, H. S. Nano Lett. 2011, 11, 4607. doi: 10.1021/nl202065x

  12. [12]

      Island, J. O.; Holovchenko, A.; Koole, M.; Alkemade, P. F.; Menelaou, M.; Aliaga-Alcalde, N.; Burzuri, E.; van der Zant, H. S. J. Phys.: Condens. Matter 201, 26, 474205. doi: 10.1088/0953-8984/26/47/474205

  13. [13]

      Lau, C. S.; Mol, J. A.; Warner, J. H.; Briggs, G. A. Phys. Chem. Chem. Phys. 2014, 16, 20398. doi: 10.1039/C4CP03257H

  14. [14]

      Sun, H.; Jiang, Z.; Xin, N.; Guo, X.; Hou, S.; Liao, J. ChemPhysChem 2018, 19, 2258. doi: 10.1002/cphc.201800220

  15. [15]

      Cao, Y.; Dong, S.; Liu, S.; He, L.; Gan, L.; Yu, X.; Steigerwald, M. L.; Wu, X.; Liu, Z.; Guo, X. Angew. Chem. Int. Ed. 2012, 124, 12394. doi: 10.1002/anie.201205607

  16. [16]

      Mol, J. A.; Lau, C. S.; Lewis, W. J.; Sadeghi, H.; Roche, C.; Cnossen, A.; Warner, J. H.; Lambert, C. J.; Anderson, H. L.; Briggs, G. A. D. Nanoscale 2015, 7, 13181. doi: 10.1039/C5NR03294F

  17. [17]

      Xu, Q.; Scuri, G.; Mathewson, C.; Kim, P.; Nuckolls, C.; Bouilly, D. Nano Lett. 2017, 17, 5335. doi: 10.1021/acs.nanolett.7b01745

  18. [18]

      Xin, N.; Li, X.; Jia, C.; Gong, Y.; Li, M.; Wang, S.; Zhang, G.; Yang, J.; Guo, X. Angew. Chem. 2018, 130, 14222. doi: 10.1002/ange.201807465

  19. [19]

      Sadeghi, H.; Sangtarash, S.; Lambert, C. Nano Lett. 2017, 17 (8), 4611. doi: 10.1021/acs.nanolett.7b01001

  20. [20]

      Limburg, B.; Thomas, J. O.; Holloway, G.; Sadeghi, H.; Sangtarash, S.; Hou, I. C. Y.; Cremers, J.; Narita, A.; Müllen, K.; Lambert, C. J. Adv. Funct. Mater. 2018, 28, 1803629. doi: 10.1002/adfm.201803629

  21. [21]

      Guo, X.; Small, J. P.; Klare, J. E.; Wang, Y.; Purewal, M. S.; Tam, I. W.; Hong, B. H.; Caldwell, R.; Huang, L.; O'brien, S. Science 2006, 311, 356. doi: 10.1126/science.1120986

  22. [22]

      Cao, Y.; Dong, S.; Liu, S.; Liu, Z.; Guo, X. Angew. Chem. Int. Ed. 2013, 125, 3998. doi: 10.1002/anie.201208210

  23. [23]

      Jia, C.; Migliore, A.; Xin, N.; Huang, S.; Wang, J.; Yang, Q.; Wang, S.; Chen, H.; Wang, D.; Feng, B. Science 2016, 352, 1443. doi: 10.1126/science.aaf6298

  24. [24]

      Lörtscher, E. Nat. Nanotech. 2013, 8, 381. doi: 10.1038/nnano.2013.105

  25. [25]

      Ratner, M. Nat. Nanotech. 2013, 8, 378. doi: 10.1038/nnano.2013.110

  26. [26]

      Fukushima, T.; Drisdell, W.; Yano, J.; Surendranath, Y. J. Am. Chem. Soc. 2015, 137, 10926. doi: 10.1021/jacs.5b06737

  27. [27]

      Oh, S.; Gallagher, J. R.; Miller, J. T.; Surendranath, Y. J. Am. Chem. Soc. 2016, 138, 1820. doi: 10.1021/jacs.5b13080

  28. [28]

      Ricke, N. D.; Murray, A. T.; Shepherd, J. J.; Welborn, M. G.; Fukushima, T.; Van Voorhis, T.; Surendranath, Y. ACS Catal. 2017, 7, 7680. doi: 10.1021/acscatal.7b03086

  29. [29]

      Jackson, M. N.; Oh, S.; Kaminsky, C. J.; Chu, S. B.; Zhang, G.; Miller, J. T.; Surendranath, Y. J. Am. Chem. Soc. 2018, 140, 1004. doi: 10.1021/jacs.7b10723

  30. [30]

      Gajiwala, H.; Zand, R. Polymer 2000, 41, 2009. doi: 10.1016/S0032-3861(99)00371-7

  31. [31]

      Bindewald, E.; Lorenz, R.; Hübner, O.; Brox, D.; Herten, D.-P.; Kaifer, E.; Himmel, H. J. Dalt. Trans. 2015, 44, 3467. doi: 10.1039/C4DT03572K

  32. [32]

      Sun, H.; Liu, X.; Su, Y.; Deng, B.; Peng, H.; Decurtins, S.; Sanvito, S.; Liu, S. X.; Hou, S.; Liao, J. Nanoscale 2019, doi: 10.1039/C9NR01551E

  33. [33]

      Hihath, J.; Bruot, C.; Nakamura, H.; Asai, Y.; Díez-Pérez, I.; Lee, Y.; Yu, L.; Tao, N. ACS Nano 2011, 5, 8331. doi: 10.1021/nn2030644

  34. [34]

      Lörtscher, E.; Gotsmann, B.; Lee, Y.; Yu, L.; Rettner, C.; Riel, H. ACS Nano 2012, 6, 4931. doi: 10.1021/nn300438h

•