引用本文:
Ting Li, Shou Ri Sheng, Mei Hong Wei, Cheng Chen, Cai Sheng Song. A new fluorinated poly (ether amide) bearing xanthene group[J]. Chinese Chemical Letters,
2010, 21(10): 1247-1250.
doi:
10.1016/j.cclet.2010.04.017
Citation: Ting Li, Shou Ri Sheng, Mei Hong Wei, Cheng Chen, Cai Sheng Song. A new fluorinated poly (ether amide) bearing xanthene group[J]. Chinese Chemical Letters, 2010, 21(10): 1247-1250. doi: 10.1016/j.cclet.2010.04.017

Citation: Ting Li, Shou Ri Sheng, Mei Hong Wei, Cheng Chen, Cai Sheng Song. A new fluorinated poly (ether amide) bearing xanthene group[J]. Chinese Chemical Letters, 2010, 21(10): 1247-1250. doi: 10.1016/j.cclet.2010.04.017

A new fluorinated poly (ether amide) bearing xanthene group
摘要:
A new fluorinated poly (ether amide) bearing xanthene group was prepared from 9, 9-bis[4-(2-trifluoromethyl-4-aminophenox-y) phenyl]xanthene (BTFAPX) with 9, 9-bis[4-(4-carboxyphenoxy) phenyllxanthene(BCAPX)in the presence of triphenyl phos-phate and pyridine (Py). The polymer had the weight-average molecular weight (Mw) of 69, 000 and number-average molecular weight (Mn) of 39, 000, showed the glass transition temperature (Tg) of 267℃, 5% weight loss temperature(Td5)over 460℃ both in N2 and air, and char yield of 62% at 800℃ in N2. This polymer was amorphous and readily soluble in amide-type solvents such as N, N-dimethylacetamide (DMAc), and even in m-cressol, Py and tetrahydrofuran (THF) at room temperature, and exhibited tensile strength of 74 MPa, elongation at break of 6%, tensile moduli of 2.2 GPa. The polymer had low dielectric constant of 3.69 (100 Hz), low moisture absorption of 0.56%, and high transparency with an ultraviolet-visible absorption cut-off wavelength at 334 nm.
English
A new fluorinated poly (ether amide) bearing xanthene group
Abstract:
A new fluorinated poly (ether amide) bearing xanthene group was prepared from 9, 9-bis[4-(2-trifluoromethyl-4-aminophenox-y) phenyl]xanthene (BTFAPX) with 9, 9-bis[4-(4-carboxyphenoxy) phenyllxanthene(BCAPX)in the presence of triphenyl phos-phate and pyridine (Py). The polymer had the weight-average molecular weight (Mw) of 69, 000 and number-average molecular weight (Mn) of 39, 000, showed the glass transition temperature (Tg) of 267℃, 5% weight loss temperature(Td5)over 460℃ both in N2 and air, and char yield of 62% at 800℃ in N2. This polymer was amorphous and readily soluble in amide-type solvents such as N, N-dimethylacetamide (DMAc), and even in m-cressol, Py and tetrahydrofuran (THF) at room temperature, and exhibited tensile strength of 74 MPa, elongation at break of 6%, tensile moduli of 2.2 GPa. The polymer had low dielectric constant of 3.69 (100 Hz), low moisture absorption of 0.56%, and high transparency with an ultraviolet-visible absorption cut-off wavelength at 334 nm.
-
Key words:
- Fluorinated polyamide
- / Xanthene group
- / Trifluoromethyl substituents

计量
- PDF下载量: 0
- 文章访问数: 720
- HTML全文浏览量: 30