Biodegradable Poly(propylene carbonate)/Layered Double Hydroxide Composite Films with Enhanced Gas Barrier and Mechanical Properties

Gao-feng Li Wen-han Luo Min Xiao Shuan-jin Wang Yue-zhong Meng

Citation:  Gao-feng Li, Wen-han Luo, Min Xiao, Shuan-jin Wang, Yue-zhong Meng. Biodegradable Poly(propylene carbonate)/Layered Double Hydroxide Composite Films with Enhanced Gas Barrier and Mechanical Properties[J]. Chinese Journal of Polymer Science, 2016, 34(1): 13-22. doi: 10.1007/s10118-016-1720-9 shu

Biodegradable Poly(propylene carbonate)/Layered Double Hydroxide Composite Films with Enhanced Gas Barrier and Mechanical Properties

摘要: Relatively well crystallized and high aspect ratio Mg-Al layered double hydroxides (LDHs) were prepared by co-precipitation process in aqueous solution and further rehydrated to an organic modified LDH (OLDH) in the presence of surfactant. The intercalated structure and high aspect ratio of OLDH were verified by X-ray diffraction (XRD) and scanning electron microscopy (SEM). A series of poly(propylene carbonate)(PPC)/OLDH composite films with different contents of OLDH were prepared via a melt-blending method. Their cross section morphologies, gas barrier properties and tensile strength were investigated as a function of OLDH contents. SEM results show that OLDH platelets are well dispersed within the composites and oriented parallel to the composite sheet plane. The gas barrier properties and tensile strength are obviously enhanced upon the incorporation of OLDH. Particularly, PPC/2%OLDH film exhibits the best barrier properties among all the composite films. Compared with pure PPC, the oxygen permeability coefficient (OP) and water vapor permeability coefficient (WVP) is reduced by 54% and 17% respectively with 2% OLDH addition. Furthermore, the tensile strength of PPC/2%OLDH is 83% higher than that of pure PPC with only small lose of elongation at break. Therefore, PPC/OLDH composite films show great potential application in packaging materials due to its biodegradable properties, superior oxygen and moisture barrier characteristics.

English

  • 
    1. [1]

      Jagadish, R.S., Raj, B. and Asha, M.R., J. Appl. Polym. Sci., 2009, 113:3732

    2. [2]

      Phillips, C.A., Int. J. Food Sci. Technol., 1996, 31:463

    3. [3]

      Norrman, K., Larsen, N.B. and Krebs, F.C., Sol. Energy Mater. Sol. Cells, 2006, 90:2793

    4. [4]

      Goodyer, C.E. and Bunge, A.L., J. Membr. Sci., 2009, 329:209

    5. [5]

      Lu, C.S. and Mai, Y.W., Compos. Sci., 2007, 67:2895

    6. [6]

      Jang, W.S., Rawson, I. and Grunlan, J.C., Thin Solid Films, 2008, 516:4819

    7. [7]

      Gorecki, P. and Kuran, W., J. Polym. Sci., Polym. Lett. Ed., 1985, 23:299

    8. [8]

      Chen, X.H., Shen, Z.Q. and Zhang, Y.F., Macromolecules, 1991, 24:5305

    9. [9]

      Inoue, S., Koinuma, H. and Tsuruta, T., J. Polym. Sci., Part B:Polym. Lett., 1969, 7:287

    10. [10]

      Zhu, Q., Meng, Y.Z., Tjong, S.C., Zhao, X.S. and Chen, Y.L., Polym. Int., 2002, 51:1079

    11. [11]

      Wang, S.J., Du, L.C., Zhao, X.S., Meng, Y.Z. and Tjong, S.C., J. Appl. Polym. Sci., 2002, 85:2327

    12. [12]

      Khan, S.B., Akhtar, K., Seo, J., Han, H. and Rub, M.A., Chinese J. Polym. Sci., 2012, 30(5):735

    13. [13]

      Zhai, L.P., Li, G.F., Xu, Y., Xiao, M., Wang, S.J. and Meng, Y.Z., J. Appl. Polym. Sci., 2015, 132:41663

    14. [14]

      Lee, Y., Kim, D., Seo, J., Han, H. and Khan, S.B., Polym. Int., 2013, 62:1386

    15. [15]

      Dennler, G., Lungenschmied, C., Neugebauer, H., Sariciftci, N.S., Latreche, M., Czeremuszkin, G. and Wertheimer, M.R., Thin Solid Films, 2006, 511-512:349

    16. [16]

      Dameron, A.A., Davidson, S.D., Burton, B.B., Carcia, P.F., McLean, R.S. and George, S.M., J. Phys. Chem. C, 2008, 112(12):4573

    17. [17]

      Ye, J., Shimizu, S., Stao, S., Kojima, N. and Noro, J., Appl. Phys. Lett., 2006, 89:031913

    18. [18]

      Braterman, P.S., Xu, Z.P. and Yarberry, F., in Handbook of layered materials, Chap. 8, ed. by Auerbach, S.M., Carrado, K.A. and Dutta, P.K., Marcel Dekker, New York, 2004, p.373

    19. [19]

      Evans, D.G. and Duan, X., Chem. Commun., 2006, 5:485

    20. [20]

      Williams, G.R. and O'Hare, D., J. Mater. Chem., 2006, 16:3065

    21. [21]

      Fogg, A.M., Freij, A.J. and Parkinson, G.M., Chem. Mater., 2002, 14(1):232

    22. [22]

      Hou, X.Q. and Kirkpatrick, R.J., Chem. Mater., 2002, 14(3):1195

    23. [23]

      Xu, Z.P., Stevenson, G.S., Lu, C.Q., Lu, G.Q., Bartlett, P.F. and Gray, P.P., J. Am. Chem. Soc., 2006, 128(1):36

    24. [24]

      Cui, Z. and Qu, B.J., Chinese J. Polym. Sci., 2010, 28(4):563

    25. [25]

      Gago, S., Costa, T., de Melo, J.S., Gonalves, I.S. and Pillinger, M., J. Mater. Chem., 2008, 18:894

    26. [26]

      Gunjakar, J.L., Kim, T.W., Kim, H.N., Kim, I.Y. and Hwang, S.J., J. Am. Chem. Soc., 2011, 133(38):14998

    27. [27]

      Yan, D.P., Lu, J., Wei, M., Evans, D.G. and Duan, X., J. Mater. Chem., 2011, 21:13128

    28. [28]

      Woo, M.A., Song, M.S., Kim, T.W., Kim, I.Y., Ju, J.Y., Lee, Y.S., Kim, S.J., Choy, J.H. and Hwang, S.J., J. Mater. Chem., 2011, 21:4286

    29. [29]

      Wang, A.R., Bao, Y.Z., Weng, Z.X. and Huang, Z.M., Chinese J. Polym. Sci., 2007, 25(6):573

    30. [30]

      Liu, T.X., Peng, H.D., Miao, Y.E., Tjiu, W.W., Shen, L. and Wei, C., Chinese J. Polym. Sci., 2014, 32(10):1276

    31. [31]

      Dou, Y.B., Xu, S.M., Liu, X.X., Han, J.B., Yan, H., Wei, M., Evans, D.G. and Duan, X., Adv. Funct. Mater., 2014, 24:514

    32. [32]

      Du, L.C., Qu, B.J., Meng, Y.Z. and Zhu, Q., Compos. Sci. Technol., 2006, 66:913

    33. [33]

      Shen, J.Y., Kobe, J.M., Chen, Y. and Dumesic, J.A., Langmuir, 1994, 10(10):3902

    34. [34]

      Lin, K.J., Jeng, U.S. and Lin, K.F., Mater. Chem. Phys., 2011, 131:120

    35. [35]

      Willett, J.L., J. Appl. Polym. Sci., 1994, 54:1685

    36. [36]

      Gu, L., Wu, Q.Y. and Yu, H.B., Chinese J. Polym. Sci., 2015, 33(6):838

    37. [37]

      Sun, L.Y., Boo, W.J., Clearfield, A., Sue, H.J. and Pham, H.Q., J. Membr. Sci., 2008, 318:129

    38. [38]

      Alix, S., Follain, N., Tenn, N., Alexandre, B., Bourbigot, S., Soulestin, J. and Marais, S., J. Phys. Chem. C, 2012, 116(8):4937

    39. [39]

      Lange, J. and Wyser, Y., Packag. Technol. Sci., 2003, 16:149

  • 加载中
计量
  • PDF下载量:  0
  • 文章访问数:  1134
  • HTML全文浏览量:  9
文章相关
  • 发布日期:  2016-01-05
  • 收稿日期:  2015-06-02
  • 修回日期:  2015-07-07
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

/

返回文章