引用本文:
梁晓, 刘嘉, 唐洪, 徐寿颐. STN型液晶显示用聚酰亚胺表面取向材料的性能[J]. 应用化学,
2001, 18(2): 169-170.
Citation: LIANG Xiao, LIU Jia, TANG Hong, XU Shou-Yi. Property of Polyimide Alignment Layer Used for STN Liquid Crystal Display[J]. Chinese Journal of Applied Chemistry, 2001, 18(2): 169-170.
Citation: LIANG Xiao, LIU Jia, TANG Hong, XU Shou-Yi. Property of Polyimide Alignment Layer Used for STN Liquid Crystal Display[J]. Chinese Journal of Applied Chemistry, 2001, 18(2): 169-170.
STN型液晶显示用聚酰亚胺表面取向材料的性能
English
Property of Polyimide Alignment Layer Used for STN Liquid Crystal Display
Abstract:
The polyimide alignment layer containing trifluoro methyl moiety was synthesized. It is found that the imidization percentage reached 97.2% after one hour heating at 250℃ and the thermal decomposition temperature was 420℃. The high pretilt angles from 6.7~7.8° were acquired by changing the rubbing strength. STN liquid crystal cells with 240° twist angle were fabricated by using this kind of polyimide alignment material. After a series of reliability experiment at certain temperature and humidity, high temperature, low temperature and thermal impact, the power consumption currents of the cells changed little. All the results show that this kind of material is a good alignment material and can be used for STN liquid crystal display.
-
Key words:
- polyimide
- / alignment
- / pretilt angle
- / liquid crystal display
-
-
扫一扫看文章
计量
- PDF下载量: 0
- 文章访问数: 0
- HTML全文浏览量: 0
下载:
