Citation: Yan-bo Zhu, Miao Du, Chao-hua Lu, Jun Yin, Qiang Zheng. Influence of 3D Printing Parameters on the Interlayer Bonding Strength for TPU Soft Materials[J]. Acta Polymerica Sinica, ;2018, (4): 532-540. doi: 10.11777/j.issn1000-3304.2017.17146 shu

Influence of 3D Printing Parameters on the Interlayer Bonding Strength for TPU Soft Materials

Yan-bo Zhu ² ,
Miao Du ^1,2,, ,
Chao-hua Lu ³ ,
Jun Yin ³ ,
Qiang Zheng ^1,2

1.
Key Laboratory of Macromolecule Synthesis and Functionalization, Ministry of Education, Zhejiang University, Hangzhou 310027
2.
Department of Polymer Science and Engineering, Zhejiang University, Zhejiang University, Hangzhou 310027
3.
Department of Mechanical Engineering, Zhejiang University, Hangzhou 310027

Corresponding author: Miao Du, dumiao@zju.edu.cn
Received Date: 1 June 2017

By using the improved 3D printer based on the fused deposition method (FDM), thermoplastic polyurethane (TPU) elastomer soft materials were printed into stereoscopic objects. The conventional 3D printer in a FDM mode was improved for soft materials TPU. That is, the distance between the pulling wheels and heated nozzle was shortened and a polytetrafluoroethylene pipe was added to avoid the bending of the soft linear feedstock during 3D printing process. Influence of 3D printing parameter on the appearance and interlayer bonding strength of the printed products were explored. TPU with appropriate content of hard and soft segments could be used for 3D printing. In terms of printing parameter, the layer space has great influence on the appearance of the printed product. When the layer space is set too large, the bonding area will be smaller and the product prone to deform at the corner. If the layer space is set too small, the printing soft line will squeeze each other and cause the printed product deformation and the hollow structure is hard to put up. A novel model for tensile test was designed to characterize the interlayer bonding strength of the printed products. The models, which are divided into two parts during 3D printing process, are bonded to each other layer by layer. The interlayer bonding strength of the 3D printed products with TPU soft materials can catch 70% of that of the samples prepared by mould pressing, and only 48% for that of stiff printing materials. Both the layer space and platform temperature have significant impact on the interlayer bonding strength of the printed product. High platform temperature and low layer space could strengthen the interlayer bonding. The printing speed and printing temperature have little influence on the interlayer bonding strength. The outer contour error of the geometrical shape printed by TPU soft materials is within 1.65% only. Furthermore, the objects printed using TPU soft materials have great resilience and are also easy to bend.
- 3D Printing,
- Fused deposition method (FDM),
- Thermoplastic polyurethane (TPU) soft materials,
- Interlayer bonding strength
1. [1]
  Yang Xiaoling, Zhou Tianrui. J Zhejiang Inst Sci Technol, 2009, 21(3):186-189
2. [2]
  Wang Yanqing, Shen Jingxing, Wu Haiquan. J Aeronaut Mater, 2016, 36(4):89-98
3. [3]
  Mazzoleni G, Di Lorenzo D, Steimberg N. Genes & Nutrition, 2009, 4(1):13-22
4. [4]
  Rengier F, Mehndiratta A, von Tengg-Kobligk H, Zechmann C M, Unterhinninghofen R, Kauczor H U, Giesel F L. Int J Comput Ass Rad, 2010, 5(4):335-341
5. [5]
  Carter Y, Allard T T, Moore N C, Goertzen A L, Klonisch T, Hoppa R D. FASEB J, 2009, 23(1):479-481
6. [6]
  Lu Bingheng, Li Dichen. Mech Manuf Automat, 2013, 42(4):1-4
7. [7]
  He Chaoliang, Tang zhaohui, Tian Huayu, Chen Xuesi. Acta Polymerica Sinica, 2013, (6):722-732
8. [8]
  Williams J D, Deckard C R. Rapid Prototyping J, 1998, 4(2):90-100 doi: 10.1108/13552549810210257
9. [9]
  Vaezi M, Seitz H, Yang S. Int J Adv Manuf Tech, 2013, 67:1721-1754 doi: 10.1007/s00170-012-4605-2
10. [10]
  Melgoza E L, Vallicrosa G, Serenó L, Ciurana J, Rodríguez C A. Rapid Prototyping J, 2014, 20(1):2-12 doi: 10.1108/RPJ-01-2012-0003
11. [11]
  Zein I, Hutmacher D W, Tan K C, Teoh S H. Biomaterials, 2002, 23(4):1169-1185 doi: 10.1016/S0142-9612(01)00232-0
12. [12]
  Marchioli G, Van Gurp L, Van Krieken P P, Stamatialis D, Engelse M, van Blitterswijk C A, Karperien M B J, Koning E, Alblas J, Moroni L, van Apeldoorn A A. Biofabrication, 2015, 7(2):025009 doi: 10.1088/1758-5090/7/2/025009
13. [13]
  Duan B, Wang M, Zhou W Y, Cheung W L, Li Z Y, Lu W W. Acta Biomaterialia, 2010, 6(12):4495-4505 doi: 10.1016/j.actbio.2010.06.024
14. [14]
  Das A, Madras G, Dasgupta N, Umarji A M. J Eur Ceram Soc, 2003, 23(7):1013-1017 doi: 10.1016/S0955-2219(02)00266-2
15. [15]
  Korpela J, Kokkari A, Korhonen H, Malin M, Närhi T, Seppälä J. J Biomed Mater Res B, 2013, 101(4):610-619
16. [16]
  Rocha C R, Perez A R T, Roberson D A, Shemelya C M, MacDonald E, Wicker R B. J Mater Res, 2014, 29:1859-1866 doi: 10.1557/jmr.2014.158
17. [17]
  Du Juan, Wang Hui, Liu Weiqiao. Rubber Reference, 2012, 42(2):27-29
18. [18]
  Yu W, Du M, Zhang D, Lin Y, Zheng Q. Macromolecules, 2013, 46:7341-7351 doi: 10.1021/ma401260d
19. [19]
  An Mengxue. Polyurethane Elastomer Handbook. Beijing:Chemical Industry Press, 2001. 136-144
20. [20]
  Carneiro O S, Silva A F, Gomes R. Mater Design, 2015, 83:768-776 doi: 10.1016/j.matdes.2015.06.053
21. [21]
  He Manjun, Chen Wiexiao, Dong Xixia, Zhang Hongdong. Polymer Physics. Shanghai:Fudan University Press, 2007. 242-244
22. [22]
  Song Yihu, Du Miao, Yang Hongmei, Zheng Qiang. Acta Polymerica Sinica, 2013, (9):1115-1130
23. [23]
  Zhou J G, Herscovici D, Chen C C. Int J Mach Tool Manu, 2000, 40(3):363-379 doi: 10.1016/S0890-6955(99)00068-1
1. [1]
  Qiang Zhou , Pingping Zhu , Wei Shao , Wanqun Hu , Xuan Lei , Haiyang Yang . Innovative Experimental Teaching Design for 3D Printing High-Strength Hydrogel Experiments. University Chemistry, 2024, 39(6): 264-270. doi: 10.3866/PKU.DXHX202310064
2. [2]
  Yuexi Guo , Zhaoyang Li , Jingwei Dai . Charlie and the 3D Printing Chocolate Factory. University Chemistry, 2024, 39(9): 235-242. doi: 10.3866/PKU.DXHX202309067
3. [3]
  Xi Xu , Chaokai Zhu , Leiqing Cao , Zhuozhao Wu , Cao Guan . Experiential Education and 3D-Printed Alloys: Innovative Exploration and Student Development. University Chemistry, 2024, 39(2): 347-357. doi: 10.3866/PKU.DXHX202308039
4. [4]
  Jiajia Li , Xiangyu Zhang , Zhihan Yuan , Zhengyang Qian , Jian Zhu . 3D Printing Based on Photo-Induced Reversible Addition-Fragmentation Chain Transfer Polymerization. University Chemistry, 2024, 39(5): 11-19. doi: 10.3866/PKU.DXHX202309073
5. [5]
  Lin Song , Dourong Wang , Biao Zhang . Innovative Experimental Design and Research on Preparing Flexible Perovskite Fluorescent Gels Using 3D Printing. University Chemistry, 2024, 39(7): 337-344. doi: 10.3866/PKU.DXHX202310107
6. [6]
  Chengcheng Si , Linshan Chai , Huiyuan Liu , Liye Sun , Shijian Cheng , Hailing Li , Wenyun Wang , Fang Liu , Qing Feng , Min Liu . Harry Potter China Tour Themed Innovative Science Popularization Experiment: Chemistry Magic Meets the Real World at Wuhan Station. University Chemistry, 2024, 39(9): 283-287. doi: 10.12461/PKU.DXHX202401069
7. [7]
  Zhiyuan TONG , Ziyuan LI , Ke ZHANG . Three-dimensional porous collector based on Cu-Li_6.4La₃Zr_1.4Ta_0.6O₁₂ composite layer for the construction of stable lithium metal anode. Chinese Journal of Inorganic Chemistry, 2025, 41(3): 499-508. doi: 10.11862/CJIC.20240238
8. [8]
  Jie XIE , Hongnan XU , Jianfeng LIAO , Ruoyu CHEN , Lin SUN , Zhong JIN . Nitrogen-doped 3D graphene-carbon nanotube network for efficient lithium storage. Chinese Journal of Inorganic Chemistry, 2024, 40(10): 1840-1849. doi: 10.11862/CJIC.20240216
9. [9]
  Chengmin Hu , Pingxuan Liu , Ziyang Song , Yaokang Lv , Hui Duan , Li Xie , Ling Miao , Mingxian Liu , Lihua Gan . Tailor-made overstable 3D carbon superstructures towards efficient zinc-ion storage. Chinese Chemical Letters, 2025, 36(4): 110381-. doi: 10.1016/j.cclet.2024.110381
10. [10]
  Run Chai , Qiujie Wu , Yongchao Liu , Xiaohui Song , Xuyong Feng , Yi Sun , Hongfa Xiang . A 3D dual layer host with enhanced sodiophilicity as stable anode for high-energy sodium metal batteries. Chinese Chemical Letters, 2025, 36(6): 110007-. doi: 10.1016/j.cclet.2024.110007
11. [11]
  Lina Guo , Ruizhe Li , Chuang Sun , Xiaoli Luo , Yiqiu Shi , Hong Yuan , Shuxin Ouyang , Tierui Zhang . 层状双金属氢氧化物的层间阴离子对衍生的Ni-Al₂O₃催化剂光热催化CO₂甲烷化反应的影响. Acta Physico-Chimica Sinica, 2025, 41(1): 2309002-. doi: 10.3866/PKU.WHXB202309002
12. [12]
  Jiao CHEN , Yi LI , Yi XIE , Dandan DIAO , Qiang XIAO . Vapor-phase transport of MFI nanosheets for the fabrication of ultrathin b-axis oriented zeolite membranes. Chinese Journal of Inorganic Chemistry, 2024, 40(3): 507-514. doi: 10.11862/CJIC.20230403
13. [13]
  Xiao-Hong Yi , Chong-Chen Wang . Metal-organic frameworks on 3D interconnected macroporous sponge foams for large-scale water decontamination: A mini review. Chinese Chemical Letters, 2024, 35(5): 109094-. doi: 10.1016/j.cclet.2023.109094
14. [14]
  Yi Zhu , Jingyan Zhang , Yuchao Zhang , Ying Chen , Guanghui An , Ren Liu . Designing unimolecular photoinitiator by installing NHPI esters along the TX backbone for acrylate photopolymerization and their applications in coatings and 3D printing. Chinese Chemical Letters, 2024, 35(7): 109573-. doi: 10.1016/j.cclet.2024.109573
15. [15]
  Jie Wu , Xiaoqing Yu , Guoxing Li , Su Chen . Engineering particles towards 3D supraballs-based passive cooling via grafting CDs onto colloidal photonic crystals. Chinese Chemical Letters, 2024, 35(4): 109234-. doi: 10.1016/j.cclet.2023.109234
16. [16]
  Huanyan Liu , Jiajun Long , Hua Yu , Shichao Zhang , Wenbo Liu . Rational design of highly conductive and stable 3D flexible composite current collector for high performance lithium-ion battery electrodes. Chinese Chemical Letters, 2025, 36(3): 109712-. doi: 10.1016/j.cclet.2024.109712
17. [17]
  Yue Li , Minghao Fan , Conghui Wang , Yanxun Li , Xiang Yu , Jun Ding , Lei Yan , Lele Qiu , Yongcai Zhang , Longlu Wang . 3D layer-by-layer amorphous MoS_x assembled from [Mo₃S₁₃]^2- clusters for efficient removal of tetracycline: Synergy of adsorption and photo-assisted PMS activation. Chinese Chemical Letters, 2024, 35(9): 109764-. doi: 10.1016/j.cclet.2024.109764
18. [18]
  Hengying Xiang , Nanping Deng , Lu Gao , Wen Yu , Bowen Cheng , Weimin Kang . 3D core-shell nanofibers framework and functional ceramic nanoparticles synergistically reinforced composite polymer electrolytes for high-performance all-solid-state lithium metal battery. Chinese Chemical Letters, 2024, 35(8): 109182-. doi: 10.1016/j.cclet.2023.109182
19. [19]
  Guoqiang Chen , Zixuan Zheng , Wei Zhong , Guohong Wang , Xinhe Wu . 熔融中间体运输导向合成富氨基g-C₃N₄纳米片用于高效光催化产H₂O₂. Acta Physico-Chimica Sinica, 2024, 40(11): 2406021-. doi: 10.3866/PKU.WHXB202406021
20. [20]
  Peng XU , Shasha WANG , Nannan CHEN , Ao WANG , Dongmei YU . Preparation of three-layer magnetic composite Fe₃O₄@polyacrylic acid@ZiF-8 for efficient removal of malachite green in water. Chinese Journal of Inorganic Chemistry, 2024, 40(3): 544-554. doi: 10.11862/CJIC.20230239

Get Citation

PDF

XML

Metrics

PDF Downloads(0)
Abstract views(159)
HTML views(17)

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142