Citation: Xue-Min Dai, Hong Gao, Ran Zhang, Zhi-Jun Du, Tong-Fei Shi, Xiang-Ling Ji, Xue-Peng Qiu, Yong-Feng Men. Preparation and Properties of High-performance Polyimide Copolymer Fibers Derived from 5-Amino-2-(2-hydroxy-5-aminobenzene)-benzoxazole[J]. Chinese Journal of Polymer Science, ;2019, 37(5): 478-492. doi: 10.1007/s10118-019-2205-4 shu

Preparation and Properties of High-performance Polyimide Copolymer Fibers Derived from 5-Amino-2-(2-hydroxy-5-aminobenzene)-benzoxazole

  • Corresponding author: Xue-Peng Qiu, xp_q@ciac.ac.cn Yong-Feng Men, men@ciac.ac.cn
  • Received Date: 14 October 2018
    Revised Date: 24 November 2018
    Accepted Date: 9 December 2018
    Available Online: 23 January 2019

  • A series of polyamic acid copolymers (co-PAAs) with para-hydroxyl groups was synthesized using two diamine monomers, namely p-phenylenediamine (p-PDA) and 5-amino-2-(2-hydroxy-5-aminobenzene)-benzoxazole (m-pHBOA), of different molar ratios through copolymerization with 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA) in N,N-dimethyacetamine (DMAc). The co-PAA solutions were used to fabricate fibers by dry-jet wet spinning, and thermal imidization was conducted to obtain polyimide copolymer (co-PI) fibers. The effects of the m-pHBOA moiety on molecular packing and physical properties of the prepared fibers were investigated. Fourier transform infrared (FTIR) spectroscopic results confirmed that intra/intermolecular hydrogen bonds originated from the hydroxyl group and the nitrogen atom of the benzoxazole group and/or the hydroxyl group and the oxygen atom of the carbonyl group of cyclic imide. As-prepared PI fibers displayed homogenous and smooth surface and uniform diameter. The glass transition temperatures (Tgs) of PI fibers were within 311−337 °C. The polyimide fibers showed 5% weight loss temperature (T5%) at above 510 °C in air. Two-dimensional wide-angle X-ray diffraction (WXRD) patterns indicated that the homo-PI and co-PI fibers presented regularly arranged polymer chains along the fiber axial direction. The ordered molecular packing along the transversal direction was destroyed by introducing the m-pHBOA moiety. Moreover, the crystallinity and orientation factors increased with increasing draw ratio. Small-angle X-ray scattering (SAXS) results showed that it is beneficial to reduce defects in the fibers by increasing the draw ratio. The resultant PI fibers exhibited excellent mechanical properties with fracture strength and initial modulus of 2.48 and 89.73 GPa, respectively, when the molar ratio of p-PDA/m-pHBOA was 5/5 and the draw ratio was 3.0.
  • 加载中
    1. [1]

      Li, F.; Huang, L.; Shi, Y.; Jin, X.; Wu, Z.; Shen, Z.; Chuang, K.; Lyon, R. E.; Harris, F. W.; Cheng S. Z. D. Thermal degradation mechanism and thermal mechanical properties of two high-performance aromatic polyimide fibers. J. Macromol. Sci. Part B: Phys. 2016, 38(1-2), 107-122.

    2. [2]

      Zhao, Y.; Dong, Z.; Li, G.; Dai, X.; Liu, F.; Ma, X.; Qiu, X. Atomic oxygen resistance of polyimide fibers with phosphorus-containing side chains. RSC Adv. 2017, 7, 5437-5444.  doi: 10.1039/C6RA26941A

    3. [3]

      Dong, J.; Yang, C.; Cheng, Y.; Wu, T.; Zhao, X.; Zhang, Q. Facile method for fabricating low dielectric constant polyimide fibers with hyperbranched polysiloxane. J. Mater. Chem. C 2017, 5, 2818-2825  doi: 10.1039/C7TC00196G

    4. [4]

      Zhao, Y.; Feng, T.; Li, G.; Liu, F.; Dai, X.; Dong, Z.; Qiu, X. Synthesis and properties of novel polyimide fibers containing phosphorus groups in the main chain. RSC Adv. 2016, 6, 42482-42494.  doi: 10.1039/C6RA02344D

    5. [5]

      Penn, L.; Larsen, F. Physicochemical properties of kevlar-49 fiber. J. Appl. Polym. Sci. 1979, 23, 59-73.  doi: 10.1002/app.1979.070230106

    6. [6]

      Yang, H., in Kevlar aramid fiber, Wiley, 1993.

    7. [7]

      Choe, E. W.; Kim, S. N. Synthesie, spining and fiber mechanical properties of poly(p-phenylenebenzobisoxazole). Macromolecules 1981, 14, 920-924.  doi: 10.1021/ma50005a006

    8. [8]

      Sikkema, D. J. Design, synthesis and properties of a novel rigid rod polymer; PIPD or M5′: high modulus and tenacity fibres with substantial compressive strength. Polymer 1998, 39(24), 5981-5986.  doi: 10.1016/S0032-3861(97)10289-0

    9. [9]

      Afshari, M.; Sikkema, D. J.; Lee, K.; Bogle, M. High performance fibers based on rigid and flexible polymers. Polym. Rev. 2008, 48(2), 230-274.  doi: 10.1080/15583720802020129

    10. [10]

      Eashoo, M.; Wu, Z.; Zhang, A.; Shen, D.; Tse, C.; Harris, F. W.; Cheng, S. Z. D.; Gardner, K. H.; Hsiao, B. S. High performance aromatic polyimide fibers, 3. A polyimide synthesized from 3,3′,4,4′-biphenyltetracarboxylic dianhydride and 2,2′-dimethyl-4,4′-diaminobiphenyl. Macromol. Chem. Phys. 1994, 195, 2207-2225.  doi: 10.1002/macp.1994.021950627

    11. [11]

      Cheng, S. Z. D.; Wu, Z.; Mark, E. A high-performance aromatic polyimide fibre: 1. Structure, properties and mechanical-history dependence. Polymer 1991, 32(10), 1803-1810.  doi: 10.1016/0032-3861(91)90367-R

    12. [12]

      Dong, J.; Yin, C.; Luo, W.; Zhang, Q. Synthesis of organ-soluble copolyimides by one-step polymerization and fabrication of high performance fibers. J. Mater. Sci. 2013, 48, 7594-7602.  doi: 10.1007/s10853-013-7576-2

    13. [13]

      Park, S. K.; Farris, R. J. Dry-jet wet spinning of aromatic polyamic acid fiber using chemical imidization. Polymer 2001, 42(26), 10087-10093.  doi: 10.1016/S0032-3861(01)00576-6

    14. [14]

      Dorogy, W. E.; St Clair, A. K. Wet spinning of solid polyamic acid fibers. J. Appl. Polym. Sci. 1991, 43, 501-519.  doi: 10.1002/app.1991.070430311

    15. [15]

      Zhang, E.; Dai, X.; Dong, Z.; Qiu, X.; Ji, X. Critical concentration and scaling exponents of one soluble polyimide from dilute to semidilute entangled solutions. Polymer 2016, 84, 275-285.  doi: 10.1016/j.polymer.2016.01.001

    16. [16]

      Xiang, H.; Huang, Z.; Liu, L.; Chen, L.; Zhu, J.; Hu, Z.; Yu, J. Structure and properties of polyimide (BTDA-TDI/MDI co-polyimide) fibers obtained by wet-spinning. Macromol. Res. 2011, 19(7), 645-653.  doi: 10.1007/s13233-011-0709-z

    17. [17]

      Yang, W.; Liu, F.; Zhang, J.; Zhang, E.; Qiu, X.; Ji, X. Influence of thermal treatment on the structure and mechanical properties of one aromatic BPDA-PDA polyimide fiber. Eur. Polym. J. 2017, 96, 429-442.  doi: 10.1016/j.eurpolymj.2017.09.015

    18. [18]

      Yin, C.; Dong, J.; Tan, W.; Lin, J.; Chen, D.; Zhang, Q. Strain-induced crystallization of polyimide fibers containing 2-(4-aminophenyl)-5-aminobenzimidazole moiety. Polymer 2015, 75, 178-186.  doi: 10.1016/j.polymer.2015.08.025

    19. [19]

      Dong, J.; Yin, C.; Lin, J.; Zhang, D.; Zhang, Q. Evolution of the microstructure and morphology of polyimide fibers during heat-drawing process. RSC Adv. 2014, 4, 44666-44673.  doi: 10.1039/C4RA07129H

    20. [20]

      Yang, W.; Liu, F.; Zhang, E.; Qiu, X.; Ji, X. Influence of atmosphere and force during thermal imidization on the structure and properties of BPDA-PDA polyimide fibers. Chem. J. Chinese U-Chinese 2017, 38(1), 150-158.

    21. [21]

      Yan, X.; Zhang, M.; Qi, S.; Tian, G.; Niu, H.; Wu, D. A high-performance aromatic co-polyimide fiber: structure and property relationship during gradient thermal annealing. J. Mater. Sci. 2018, 53, 2193-2207.  doi: 10.1007/s10853-017-1552-1

    22. [22]

      Yang, W.; Liu, F.; Li, G.; Zhang, E.; Xue, Y.; Dong, Z.; Qiu, X.; Ji, X. Comparison of different methods for determining the imidization degree of polyimide fibers. Chinese J. Polym. Sci. 2016, 34(2), 209-220.  doi: 10.1007/s10118-016-1749-9

    23. [23]

      Sukhanova, T.; Baklagina, Y. G.; Kudryavtsev, V.; Maricheva, T.; Lednický, F. Morphology, deformation and failure behaviour of homo-and copolyimide fibres: 1. Fibres from 4,4′-oxybis (phthalic anhydride)(DPhO) and p-phenylenediamine (PPh) or/and 2,5-bis (4-aminophenyl)-pyrimidine (2,5PRM). Polymer 1999, 40(23), 6265-6276.  doi: 10.1016/S0032-3861(99)00039-7

    24. [24]

      Chen, X.; Li, Z.; Liu, F.; Sun, Q.; Li, J. Synthesis and properties of poly(imide-benzoxazole) fibers from 4,4′-oxydiphthalic dianhydride in polyphosphoric acid. Eur. Polym. J. 2015, 64, 108-117.  doi: 10.1016/j.eurpolymj.2014.12.031

    25. [25]

      Yin, C.; Dong, J.; Zhang, D.; Lin, J.; Zhang, Q. Enhanced mechanical and hydrophobic properties of polyimide fibers containing benzimidazole and benzoxazole units. Eur. Polym. J. 2015, 67, 88-98.  doi: 10.1016/j.eurpolymj.2015.03.028

    26. [26]

      Cheng, Y.; Dong, J.; Yang, C.; Wu, T.; Zhao, X.; Zhang, Q. Synthesis of poly(benzobisoxazole-co-imide) and fabrication of high-performance fibers. Polymer 2017, 133, 50-59.  doi: 10.1016/j.polymer.2017.11.015

    27. [27]

      Gan, F.; Dong, J.; Zhang, D.; Tan, W.; Zhao, X.; Zhang, Q. High-performance polyimide fibers derived from wholly rigid-rod monomers. J. Mater. Sci. 2018, 53, 5477-5489.  doi: 10.1007/s10853-017-1932-6

    28. [28]

      Niu, H.; Huang, M.; Qi, S.; Han, E.; Tian, G.; Wang, X.; Wu, D. High-performance copolyimide fibers containing quinazolinone moiety: Preparation, structure and properties. Polymer 2013, 54, 1700-1708.  doi: 10.1016/j.polymer.2013.01.047

    29. [29]

      Borjigin, H.; Liu, Q.; Zhang, W.; Gaines, K.; Riffle, J. S.; Paul, D. R.; Freeman, B. D.; McGrath, J. E. Synthesis and characterization of thermally rearranged (TR) polybenzoxazoles: Influence of isometic structure on gas transport properties. Polymer 2015, 75, 199-210.  doi: 10.1016/j.polymer.2015.07.024

    30. [30]

      Hodgkin, J. H.; Liu, M. S.; Dao, B. N.; Mardel, J.; Hill, A. J. Reaction mechanism and products of the thermal conversion of hydroxy-containing polyimides. Eur. Polym. J. 2011, 47, 394-400.  doi: 10.1016/j.eurpolymj.2010.12.014

    31. [31]

      Han, S. H., Lee, J. E.; Lee, K. J.; Park, H. B.; Lee, Y. M. Highly gas permeable and microporous polybenzimidazole membrane by thermal rearrangement. J. Membr. Sci. 2010, 357, 143-151.  doi: 10.1016/j.memsci.2010.04.013

    32. [32]

      Dai, X.; Bao, F.; Jiao, L.; Yao, H.; Ji, X.; Qiu, X.; Men, Y. High-performance polyimide copolymer fibers derived from 5-amino-2-(2-hydroxy-4-aminobenzene)-benzoxazole: preparation, structure and properties. Polymer 2018, 150, 254-266.  doi: 10.1016/j.polymer.2018.06.079

    33. [33]

      Preston, J.; Dewinter, W.; Hofferbert, W. Heterocyclic intermediates for the preparation of thermally stable polymers. II. Benzoxazoles and benzothiazoles. J. Heterocycl. Chem. 1968, 5, 269-273.  doi: 10.1002/jhet.v5:2

    34. [34]

      Klug, H. P.; Alexander, L. E., in X-ray diffraction procedures, Wiley: New York, 1954.

    35. [35]

      Wilchinsky, Z. Orientation in crystalline polymers related to deformation. Polymer 1964, 5(6), 271-281.

    36. [36]

      Ruland, W. Small-angle scattering studies on carbonized cellulose fibers. J. Polym. Sci., Part C:Polym. Symp. 1969, 28, 143-151.

    37. [37]

      Guiner, A.; Fournet, G.; Walker, C., in Small angle scattering of X-rays, Wiley & Sons, New York, 1955.

    38. [38]

      Kratky, O.; Porod, G. Diffuse small-angle scattering of X-rays in colloid systems. J. Coll. Sci. 1949, 4, 35-70.  doi: 10.1016/0095-8522(49)90032-X

    39. [39]

      Lin, C.; Kuo, J.; Chen, C.; Fang, J. Investigation of bifurcated hydrogen bonds within the thermotropic liquid crystalline polyurethanes. Polymer 2012, 53(1), 254-258.  doi: 10.1016/j.polymer.2011.11.009

    40. [40]

      Dong, H.; Xin, Z.; Lu, X.; Lv, Y. Effect of N-substituents on the surface characteristics and hydrogen bonding network of polybenzoxazines. Polymer 2011, 52(4), 1092-1101.  doi: 10.1016/j.polymer.2011.01.009

    41. [41]

      Snyder, R.; Thomson, B.; Bartges, B.; Czerniawski, D.; Painter, P. FTIR studies of polyimides: thermal curing. Macromolecules 1989, 22, 4166-4172.  doi: 10.1021/ma00201a006

    42. [42]

      Konieczny, J.; Wunder, S. Absence of noncyclic imide formation in PMDA-ODA polyimide. Macromolecules 1996, 29, 7613-7615.  doi: 10.1021/ma9600217

    43. [43]

      Ma, X.; Kang, C.; Chen, W.; Jin, R.; Guo, H.; Qiu, X.; Gao, L. Effect of multiple H-bonding on the properties of polyimides containing the rigid rod groups. J. Polym. Sci., Part A: Polym. Chem. 2016, 54, 570-581.

    44. [44]

      Luo, L.; Yao, J.; Wang, X.; Li, K.; Huang, J.; Li, B.; Wang, H.; Feng, Y.; Liu, X. The evolution of macromolecular packing and sudden crystallization in rigid-rod polyimide via effect of multiple H-bonding on charge transfer (CT) interactions. Polymer 2014, 55(16), 4258-4269.  doi: 10.1016/j.polymer.2014.06.080

    45. [45]

      Fan, L.; Zhao, D.; Bian, C.; Wang, Y.; Liu, G. Glass transition temperatures of copolymers from methyl methacrylate, styrene, and acrylonitrile: binary copolymers. Polym. Bull. 2011, 67, 1311-1323.  doi: 10.1007/s00289-011-0528-6

    46. [46]

      Jiang, G.; Huang, W.; Li, L.; Wang, X.; Pang, F.; Zhang, Y.; Wang, H. Structure and properties of regenerated cellulose fibers from different technology processes. Carbohyd. Polym. 2012, 87(3), 2012-2018.  doi: 10.1016/j.carbpol.2011.10.022

  • 加载中
    1. [1]

      Ziqi Chen ,  Miriding Mutailipu . Achieving the birefringence-bandgap trade-off: hydrogen-bond engineered biuret-cyanurate. Chinese Journal of Structural Chemistry, 2025, 44(10): 100695-100695. doi: 10.1016/j.cjsc.2025.100695

    2. [2]

      Meng Shan , Yongmei Yu , Mengli Sun , Shuping Yang , Mengqi Wang , Bo Zhu , Junbiao Chang . Bifunctional organocatalyst-catalyzed dynamic kinetic resolution of hemiketals for synthesis of chiral ketals via hydrogen bonding control. Chinese Chemical Letters, 2025, 36(1): 109781-. doi: 10.1016/j.cclet.2024.109781

    3. [3]

      Shi Li , Wenshuai Zhao , Yong Qi , Wenbin Niu , Wei Ma , Bingtao Tang , Shufen Zhang . Hydrogen bonding induced ultra-highly thermal stability of azo dyes for color films. Chinese Chemical Letters, 2025, 36(9): 110653-. doi: 10.1016/j.cclet.2024.110653

    4. [4]

      Xing Cao , Xinyu Tian , Yuanyuan Huang , Liping Zhang , Yanpeng Ni , Yu-Zhong Wang . H3PO3-protonated chitosan enabling flame-retardant and antibacterial PVA composite films with high strength and toughness through multiple H-bonds and interlocking interfaces. Chinese Chemical Letters, 2025, 36(11): 111382-. doi: 10.1016/j.cclet.2025.111382

    5. [5]

      Kejia Ling , Shunjie Li , Yuefei Wang , Huanyu Yang , Zhicheng Song , Xian Li , Suzhi Cai , Xiao Wang , Zhongfu An . Highly efficient and ultralong organic phosphorescence by doping crown ether derivatives into polymer. Chinese Chemical Letters, 2026, 37(6): 112110-. doi: 10.1016/j.cclet.2025.112110

    6. [6]

      Gang Ma ,  Siyu Jin ,  Bo Zheng ,  Lingyan Gao . Bound Water: Intelligent Regulation from Biological Hydrogen-Bond Networks to Artificial Materials. University Chemistry, 2026, 41(4): 275-279. doi: 10.12461/PKU.DXHX202504088

    7. [7]

      Ke Liu , Qi Gao , Haifeng Li , Lipeng Diao , Xuegang Chen , Daohao Li , Guanglei Wu . Hydrogen-bonding intermolecular interaction between graphene oxide and polytetrafluoroethylene enhanced creep resistance. Acta Physico-Chimica Sinica, 2026, 42(8): 100315-0. doi: 10.1016/j.actphy.2026.100315

    8. [8]

      Zidong Zhou ,  Xiang Fang ,  Zhaoxia Wang . 糖族出征,谁与争锋. University Chemistry, 2026, 41(8): 296-301. doi: 10.12461/PKU.DXHX202508028

    9. [9]

      Sem Bleus , Sergio Ribone , Renny Maria Losus , Liliana Dobrzańska , Luc Van Meervelt , Wim Dehaen . Imination enables efficient formation of a pillararene-inspired host with endo-cavity hydrogen-bonding capability. Chinese Chemical Letters, 2026, 37(6): 111792-. doi: 10.1016/j.cclet.2025.111792

    10. [10]

      Songtao Cai , Liuying Wu , Yuan Li , Soham Samanta , Jinying Wang , Bing Liu , Feihu Wu , Kaitao Lai , Yingchao Liu , Junle Qu , Zhigang Yang . Intermolecular hydrogen-bonding as a robust tool toward significantly improving the photothermal conversion efficiency of a NIR-II squaraine dye. Chinese Chemical Letters, 2024, 35(4): 108599-. doi: 10.1016/j.cclet.2023.108599

    11. [11]

      Yu Wang , Kun Ding , Xuerong Gong , Shou Chen , Ao Sun , Junxi Zhang , Baofeng Wang . Hydrogen bonding-reinforced multi-component cross-linked hydrogel electrolytes with high ionic conductivity and stretchability for stabilized zinc anodes. Chinese Chemical Letters, 2026, 37(6): 111078-. doi: 10.1016/j.cclet.2025.111078

    12. [12]

      Xiaodong Zhang ,  Bohui Xu ,  Deshuai Xiao ,  Xinyuan Zhang ,  Pifu Gong ,  Zheshuai Lin . From centrosymmetric CN3H6C6H5SO3 to non-centrosymmetric CN3H6C6H4SO3(OH): Hydroxyl introduced hydrogen bond reconstruction to realize strong second harmonic generation. Chinese Journal of Structural Chemistry, 2025, 44(10): 100707-100707. doi: 10.1016/j.cjsc.2025.100707

    13. [13]

      Yi-Chang Yang ,  Rui-Xi Wang ,  Li-Ming Wu ,  Ling Chen . Regulating the coplanarity of π-conjugated units through hydrogen bonding in FAHC2O4 and FAH2C3N3S3 crystals. Chinese Journal of Structural Chemistry, 2025, 44(10): 100714-100714. doi: 10.1016/j.cjsc.2025.100714

    14. [14]

      Qi Li , Minqiao Liang , Huifen Zhuang , Zhengyang Chen , Yuxiang Jiang , Xiaofei Chen , Yifa Chen , Ya-Qian Lan . Underscoring the polyimide-linkage in covalent organic frameworks and related applications. Chinese Chemical Letters, 2026, 37(2): 111593-. doi: 10.1016/j.cclet.2025.111593

    15. [15]

      Pei Cao , Yilan Wang , Lejian Yu , Miao Wang , Liming Zhao , Xu Hou . Dynamic asymmetric mechanical responsive carbon nanotube fiber for ionic logic gate. Chinese Chemical Letters, 2024, 35(6): 109421-. doi: 10.1016/j.cclet.2023.109421

    16. [16]

      Liangju Zhao , Shiyu Qin , Fei Wu , Limin Zhu , Qing Han , Lingling Xie , Xuejing Qiu , Hongliang Wei , Lanhua Yi , Xiaoyu Cao . Polycarbonyl conjugated porous polyimide as anode materials for high performance sodium-ion batteries. Chinese Chemical Letters, 2025, 36(8): 110246-. doi: 10.1016/j.cclet.2024.110246

    17. [17]

      Mei Peng , Wei-Min He . Photochemical synthesis and group transfer reactions of azoxy compounds. Chinese Chemical Letters, 2024, 35(8): 109899-. doi: 10.1016/j.cclet.2024.109899

    18. [18]

      Huiping Shi , Shaojun Peng , Minghui Yang , Yuanyu Huang . Engineering circular RNA with Tetrahymena group Ⅰ intron ribozyme. Chinese Chemical Letters, 2025, 36(9): 111160-. doi: 10.1016/j.cclet.2025.111160

    19. [19]

      Wenhao Wang , Siyuan Peng , Zhengwei Huang , Xin Pan . Tuning amino/hydroxyl ratios of nanovesicles to manipulate protein corona-mediated in vivo fate. Chinese Chemical Letters, 2024, 35(11): 110134-. doi: 10.1016/j.cclet.2024.110134

    20. [20]

      Haixian Ren , Yuting Du , Xiaojing Yang , Fangjun Huo , Le Zhang , Caixia Yin . Development of ESIPT-based specific fluorescent probes for bioactive species based on the protection-deprotection of the hydroxyl. Chinese Chemical Letters, 2025, 36(2): 109867-. doi: 10.1016/j.cclet.2024.109867

Metrics
  • PDF Downloads(0)
  • Abstract views(2375)
  • HTML views(98)

通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索
Address:Zhongguancun North First Street 2,100190 Beijing, PR China Tel: +86-010-82449177-888
Powered By info@rhhz.net

/

DownLoad:  Full-Size Img  PowerPoint
Return