Effect of Oscillatory Shear on the Mechanical Properties and Crystalline Morphology of Linear Low Density Polyethylene?

Citation: Zhong-bin Xu, Liang-yao Su, Peng-fei Wang, Mao Peng. Effect of Oscillatory Shear on the Mechanical Properties and Crystalline Morphology of Linear Low Density Polyethylene?[J]. Chinese Journal of Polymer Science, 2015, 33(8): 1114-1124. doi: 10.1007/s10118-015-1663-6 shu

Effect of Oscillatory Shear on the Mechanical Properties and Crystalline Morphology of Linear Low Density Polyethylene?

1.
College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, China
2.
Department of Polymer Sci &

通讯作者: Mao Peng,

基金项目:
This work was financially supported by the National Natural Science Foundation of China (Nos. 51373153 and 51073139), the Zhejiang Provincial Natural Science Foundation of China (No. LY13E030002) and the Zhejiang Leading Team of ST Innovation (No. 2011R50005).

摘要: In this study, effects of oscillatory shear with different frequencies (0-2.5 Hz) and amplitudes (0-20 mm) on the mechanical properties and crystalline morphology of linear low density polyethylene (LLDPE) were investigated. It was found that the mechanical properties of LLDPE are improved because of the more perfect crystalline structure when LLDPE crystallizes under low-frequency and small-amplitude (0.2 Hz/4 mm) oscillatory shear. The mechanical properties can be further improved by increasing either the frequency or the amplitude of oscillatory shear. The Young's modulus and tensile strength of LLDPE are improved by 27% and 20%, respectively, when the frequency is increased to 2.5 Hz and the amplitude is maintained at 4 mm; while the Young's modulus and tensile strength are improved by 49% and 47%, respectively, when the amplitude is increased to 20 mm and the frequency is remained as 0.2 Hz. The crystallinity and microstructure of LLDPE under different oscillatory shear conditions were investigated by using differential scanning calorimetry, wide angle X-ray diffraction and scanning electron microscopy to shed light on the mechanism for the improvement of mechanical properties.

关键词:

English

Effect of Oscillatory Shear on the Mechanical Properties and Crystalline Morphology of Linear Low Density Polyethylene?

1.
College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, China
2.
Department of Polymer Sci &

Corresponding author: Mao Peng,

Received Date: 26 November 2014
Revised Date: 19 January 2015
Available Online: 05 August 2015
Fund Project:
This work was financially supported by the National Natural Science Foundation of China (Nos. 51373153 and 51073139), the Zhejiang Provincial Natural Science Foundation of China (No. LY13E030002) and the Zhejiang Leading Team of ST Innovation (No. 2011R50005).

Abstract: In this study, effects of oscillatory shear with different frequencies (0-2.5 Hz) and amplitudes (0-20 mm) on the mechanical properties and crystalline morphology of linear low density polyethylene (LLDPE) were investigated. It was found that the mechanical properties of LLDPE are improved because of the more perfect crystalline structure when LLDPE crystallizes under low-frequency and small-amplitude (0.2 Hz/4 mm) oscillatory shear. The mechanical properties can be further improved by increasing either the frequency or the amplitude of oscillatory shear. The Young's modulus and tensile strength of LLDPE are improved by 27% and 20%, respectively, when the frequency is increased to 2.5 Hz and the amplitude is maintained at 4 mm; while the Young's modulus and tensile strength are improved by 49% and 47%, respectively, when the amplitude is increased to 20 mm and the frequency is remained as 0.2 Hz. The crystallinity and microstructure of LLDPE under different oscillatory shear conditions were investigated by using differential scanning calorimetry, wide angle X-ray diffraction and scanning electron microscopy to shed light on the mechanism for the improvement of mechanical properties.

Key words:

1. [1]
  Bushman, A.C. and McHugh, A.J.J., J. Appl. Polym. Sci., 1997, 64(11): 2165
2. [2]
  Okamoto, M. and Kubo, H.T., Macromolecules, 1998, 31(13): 4223
3. [3]
  Odell, J.A., Grubb, D.T. and Keller, A., Polymer, 1978, 19(6): 617
4. [4]
  Kalay, G. and Bevis, M.J., J. Polym. Sci., Part B: Polym. Phys., 1997, 35(2): 241
5. [5]
  Kalay, G. and Bevis, M.J., J. Polym. Sci., Part B: Polym. Phys., 1997, 35(2): 265
6. [6]
  Kalay, G., Zhong, Z., Allan, P. and Bevis, M.J., Polymer, 1996, 37(11): 2077
7. [7]
  Kalay, G., Sousa, R.A., Reis, R.L., Cunha, A.M. and Bevis, M.J., J. Appl. Polym. Sci., 1999, 73(12): 2473
8. [8]
  Yang, J., Wang, K., Deng, H., Chen, F. and Fu, Q., Polymer, 2010, 51(3): 774
9. [9]
  Gao, J., Zhang, Q., Wang, K., Fu, Q., Chen, Y., Chen, H.Y., Huang, H. and Rego, J.M., Compos. Part. A-Appl. S., 2012, 43(4): 562
10. [10]
  Su, R., Zhang, Z., Gao, X., Ge, Y., Wang, K. and Fu, Q., J. Phys. Chem. B, 2010, 114(31): 9994
11. [11]
  Li, J., Zhang, Q., Wang, C., Yang, H., Du, R.N. and Fu, Q., Chinese J. Polym. Sci., 2006, 24(4): 379
12. [12]
  Wang, Y., Na, B. and Fu, Q., Chinese J. Polym. Sci., 2005, 23(1): 103
13. [13]
  Xu, H., Zhong, G.J., Fu, Q., Lei, J., Jiang, W., Hsiao, B.S. and Li, Z.M., Acs. Appl. Mater. Inter., 2012, 4(12): 6774
14. [14]
  Bashir, Z., Odell, J.A. and Keller, A., J. Mater. Sci., 1986, 21(11): 3993
15. [15]
  Hill, M.J., Barham, P.J. and Keller, A., Colloid. Polym. Sci., 1983, 261(9): 721
16. [16]
  Hill, M.J., Barham, P.J. and Keller, A., Colloid. Polym. Sci., 1980, 258(9): 1023
17. [17]
  Hill, M.J. and Keller, A., Colloid. Polym. Sci., 1981, 259(3): 335
18. [18]
  Guan, Q., Shen, K.Z., Ji, L.L. and Zhu, J.M., J. Appl. Polym. Sci., 1995, 55(13): 1797
19. [19]
  Yang, H.R., Lei, J., Li, L., Fu, Q. and Li, Z.M., Macromolecules, 2012, 45(16): 6600
20. [20]
  Li, N., Cheng, W., Ren, K. and Luo, F., Chinese J. Polym. Sci., 2013, 31(1): 98
21. [21]
  Geng, C., Su, J., Han, S., Wang, K. and Fu, Q., Polymer, 2013, 54(13): 3392
22. [22]
  Soares, J.B.P. and Hamielec, A.E., Polymer, 1995, 36(11): 1639
23. [23]
  Prasad, A., Polym. Eng. Sci., 1998, 38(10): 1716
24. [24]
  Mathot, V.B.F., Scherrenberg, R.L. and Pijpers, T.F.J., Polymer, 1998, 39(19): 4541
25. [25]
  Ning, N., Deng, H., Luo, F., Zhang, Q., Wang, K., Chen, F. and Fu, Q., Polym. Adv. Technol., 2012, 23(3): 431
26. [26]
  Liang, S., Yang, H., Wang, K., Zhang, Q., Du, R. and Fu, Q., Acta Mater., 2008, 56(1): 50
27. [27]
  Lavengood, R.E., Nicolais, L. and Narkis, M., J. Appl. Polym. Sci., 1973, 17(4): 1173
28. [28]
  Huo, H., Jiang, S.J., An, L.J. and Feng, J.C., Macromolecules, 2004, 37(7): 2478
29. [29]
  Dukovski, I. and Muthukumar, M., J. Chem. Phys., 2003, 118(14): 6648

扫一扫看文章

计量

PDF下载量: 0
文章访问数: 2215
HTML全文浏览量: 71

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Effect of Oscillatory Shear on the Mechanical Properties and Crystalline Morphology of Linear Low Density Polyethylene?

通讯作者: Mao Peng,

English

Effect of Oscillatory Shear on the Mechanical Properties and Crystalline Morphology of Linear Low Density Polyethylene?

Corresponding author: Mao Peng,

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

Effect of Oscillatory Shear on the Mechanical Properties and Crystalline Morphology of Linear Low Density Polyethylene?

通讯作者: Mao Peng,

English

Effect of Oscillatory Shear on the Mechanical Properties and Crystalline Morphology of Linear Low Density Polyethylene?

Corresponding author: Mao Peng,

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南： 你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

文章相关

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs