English

• 
  
• 1. [1]

     [1] Loos, J., Schimanski, T., Hofman, J., Peijs, T. and Lemstra, P.J., Polymer, 2001, 42: 3827 [2] Ward.[J].I.M. and Sweeney, J., An introduction of the mechanical properties of solid polymers, John Wiley Sons: New York.2004,:- [3] Leclair, A. and Favis, B[J].D., Polymer.1996, 37:4723- [4] Wu, S.H., Polym[J].Eng. Sci.1990, 30:753- [5] Saujanya, C. and Radhakrishnan, S[J]., Polymer.2001, 42:4537- [6] Fakirov, S., Evstatiev, M[J].and Petrovich, S., Macromolecules.1993, 26:5219- [7] Boyaud, M.F., Ait-Kadi, A., Bousmina, M., Michel, A. and Cassagnau, P., Polymer, 2001, 42: 6515 [8] Migler, K.B., Phys[J].Rev. Lett.2001, 86:1023- [9] Li, Z.M., Yang, M.B., Huang, R., Lu, A. and Feng, J.M., J. Mater. Sci. Technol., 2002, 18: 419 [10] Li, Z.M., Yang, M.B., Lu, A., Feng, J.M., and Huang, R., Mater. Lett., 2002, 56: 756 [11] Li, Z.M., Yang, M.B., Feng, J.M. and Huang, R., J. Mater. Sci., 2001, 36: 2013 [12] Sundararaj, U. and Macosko, C[J].W., Macromolecules.1995, 28:2647- [13] Tang, T and Huang, B.T..[J]. Polymer.1994,35:281- [14] Tang, T., Jing, X.B. and Huang, B.T., J. Polym. Sci. Part B: Polym. Phys., 1994, 33: 287 [15] Becker, D., Hage, E. Jr. and Pessan, L.A., J. Appl. Polym. Sci., 2010, 115: 2540 [16] Oyman, Z.O. and Tincer, T[J]., J. Appl. Polym. Sci.2003, 89:1039- [17] Hu, G.H., Sun, Y[J].J. and Lambla, M., J. Appl. Polym. Sci.1996, 61:1039- [18] Barangi, L., Taromi, F[J].A. and Nazockdast, H., Macromol. Symp.2008, 274:166- [19] Liu, N.C., Xie, H.Q. and Baker, W.E., Polymer, 1993, 34: 4680 [20] Sun, Y.J., Hu, G.H., Lambla, M. and Kotlar, H.K., Polymer, 1996, 37: 4119 [21] Hu, G.H., Sun, Y[J].J. and Lambla, M., Polym. Eng. Sci.1996, 36:676- [22] Li, Z.M., Yang, W., Xie, B.H., Yang, S.Y., Yang, M.B., Feng, J.M. and Huang, R., Mater. Res. Bull., 2003, 38: 1867 [23] Yi, X., Xu, L., Wang, Y.L., Zhong, G.J., Ji, X. and Li, Z.M., Eur. Polym. J., 2010, 46: 719 [24] Li, Z.M., Yang, W., Li, L.B., Xie, B.H., Huang, R. and Yang, M.B., J. Polym. Sci. Part B: Polym. Phys., 2004, 42: 374 [25] Zhong, G.J., Li, L.B., Mendes, E., Byelov, D., Fu, Q. and Li, Z.M., Macromolecules, 2006, 39: 6771 [26] Chen, Y.H., Zhong, G.J., Wang, Y., Li, Z.M. and Li, L.B., Macromolecules, 2009, 42: 4343 [27] Picken, S.J., Aerts, J., Visser, R. and Northolt, M.G., Macromolecules, 1990, 23: 3849 [28] Tao, Y.J. and Mai, K[J].C., Eur. Polym. J.2007, 43:3538- [29] Durgun, H. and Bayram, G[J]., J. Adhes. Sci. Technol.2005, 19:407- [30] Chen, C.M., Hsieh, T[J].E. and Liu, M.O., React. Funct. Polym.2008, 68:1307- [31] Al-Malaika, S. and Kong, W[J]., Polym. Degrad. Stab.2005, 90:197- [32] Dai, S.S. and Ye, L[J]., Adv. Technol.2008, 19:1069- [33] Cartier, H. and Hu, G[J].H., J. Polym. Sci. Part A: Polym. Chem.1998, 36:1053- [34] Huo, H., Jiang, S.J., An, L.J. and Feng, J.C., Macromolecules, 2004, 37: 2478 [35] Varga, J. and Karger-Kocsis, J[J]., J. Polym. Sci. Part B: Polym. Phys.1996, 34:657- [36] Karger-Kocsis, J. and Varga, J[J]., J. Appl. Polym. Sci.1996, 62:291- [37] Scott, C.E. and Macosko, C[J].W., Polym. Bull.1991, 26:341- [38] Scott, C.E. and Macosko, C.W., Polymer, 1995, 36: 461 [39] Li, Z.M., Yang, M.B., Lu, A., Xie, B.H., Feng, J.M. and Huang, R., J. Mater. Sci. Lett., 2002, 21: 1063 [40] Wang, C. and Liu, C[J].R., Polymer.1999, 40:289- [41] Saujanya, C. and Radhakrishnan, S[J]., Polymer.2001, 42:4537- [42] Zhong, G.J., Li, Z.M., Li, L.B. and Mendes, E., Polymer, 2007, 48: 1729 [43] Varga, J., J. Macromol. Sci. Phys., 2002, 41: 1121 [44] Chen, H.B., Karger-Kocsis, J., Wu, J.S. and Varga, J., Polymer, 2002, 43: 6505 [45] Varga, J. and Menyhard, A[J]., Macromolecules.2007, 40:2422- [46] Lovinger, A.J., Chua, J.O. and Gryte, C.C., J. Polym. Sci. Part B: Polym. Phys., 1977, 15: 641 [47] Somani, R.H., Hsiao, B.S., Nogales, A., Fruitwala, H., Srinivas, S. and Tsou, A.H., Macromolecules, 2001, 34: 5902

•