以杨絮(PC)为原料，采用乙醇溶剂热法对其进行预处理，再进行碳化，制备了高比表面积的杨絮衍生多孔碳(DPCC)，并研究了其对染料的吸附性能及动力学性能。通过单因素实验优化工艺参数，确定最佳预处理条件(液固比为17 mL·g^-1、200 ℃处理2 h)，在此条件下制备的DPCC-10比表面积达到518 m²·g^-1。结合傅里叶变换红外光谱(FTIR)、X射线衍射(XRD)、拉曼(Raman)光谱、扫描电镜(SEM)和N₂吸附-脱附测试等表征手段，证实预处理过程能够有效去除木质素和半纤维素等，形成丰富的多级孔道结构。吸附实验表明，DPCC-10对亚甲蓝(MB)的最大吸附量达到385.71 mg·g^-1，优于多数报道的生物质衍生吸附剂。DPCC-10对染料的吸附过程满足准二级动力学方程，表明该吸附以化学吸附为主。经过4次吸附-脱附循环后，DPCC-10对MB的吸附容量仍保持初始值的92.01%，表明材料具有优异的可再生性能。

采用原位聚合法制备了氯氧化铋(BiOCl)与聚苯胺(PANI)复合的Ⅱ型异质结光催化剂BiOCl/PANI，并采用X射线衍射(XRD)、傅里叶变换红外光谱(FTIR)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外可见漫反射光谱(UV-Vis DRS)和N2吸附-脱附测试等多种技术手段对其进行了表征，考察了BiOCl/PANI在模拟可见光下对罗丹明B (RhB)的光催化降解性能。实验结果表明：BiOCl/PANI催化剂比PANI和BiOCl具有更高的光催化活性，在RhB质量浓度为50 mg·L^-1、PANI与BiOCl的物质的量之比为0.02∶1、50 mg·L^-1的催化剂条件下，所制备的BiOCl/PANI光催化150 min后，RhB降解率为98.8%，速率常数为0.031 min^-1；经过4次循环实验后，RhB降解率从98.8%降低至98.4%，表现出良好的稳定性和可重复利用性。光催化剂BiOCl/PANI实现了电子和空穴对的快速分离，降低了二者在催化剂内部的复合速率，提高了光催化性能。

仪器分析实验“分子荧光法测定罗丹明B的含量”存在实验过于简单、未考虑实际情况等问题。因此，本改进实验在三维荧光扫描模式下获取样本数据，不进行复杂预处理，而是运用化学计量学算法解析出目标分析物的纯信号，进而实现了染色辣椒中罗丹明6G和123的同时测定。本改进实验提高了学生全面考虑问题和创新解决问题的能力。

A simple two-step hydrothermal method synthesized four different CdS/Fe₃O₄ photocatalysts with varying ratios of mass of CdS to Fe₃O₄. The composition and morphology of the prepared samples were investigated using X-ray diffraction (XRD), Raman spectrum, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Solid UV reflectance spectra testing found that CdS/Fe₃O₄ nanocomposites had good light absorption throughout the spectral range, promoting their photocatalytic properties. Under visible light irradiation, CdS/Fe₃O₄ (2:5) with a mass ratio of 2:5 exhibited excellent photocatalytic performance, with a degradation rate of 98.8% for rhodamine B. Furthermore, after five cycles of photocatalytic degradation reaction, the rhodamine B degradation rate remained at 96.2%, indicating that the photocatalysts have good photocatalytic stability.

A flower-like BiOBr photocatalyst (CS/BiOBr) was prepared by using the carbon material derived from corn straw (CS) as the carrier. The prepared composites were characterized by X - ray diffraction (XRD), Fourier transform infrared (FIIR) spectra, scanning electron microscope (SEM), X - ray photoelectron spectra (XPS), and UV-Vis diffuse reflectance spectra (UV-Vis DRS). The SEM analyses indicate that the introduction of CS promotes the formation of a unique flower-like structure in BiOBr, which not only optimizes the efficiency of light capture but also increases the specific surface area of BiOBr. The bandgap of the composite was narrower compared with the pure BiOBr. The CS/BiOBr composites exhibited higher photocatalytic activity than pure CS and BiOBr under visible light irradiation, and a higher first-order reaction rate constant (k) of 0.043 7 min^-1 than BiOBr (0.014 6 min^-1), and exhibited excellent stability and reusability during the cyclic run. The enhanced photocatalytic activity is attributed to the efficient separation of photoinduced electrons and holes. Superoxide radicals and holes were the major active species.

Bi₂O₃@BiVO₄ composites were synthesized using the solvothermal method with ethylene glycol as the solvent. Bi₂O₃ was grown on the surface of BiVO₄ by regulating the reaction temperature. The adsorption performance of the composite for rhodamine B (RhB) was investigated. The results indicate that the reaction temperature significantly impacts the morphology and adsorption performance of Bi₂O₃@BiVO₄. The Bi₂O₃@BiVO₄ composite prepared at 180 ℃ (180-BO@BVO) consisted of nanoparticles with an average size of 7 nm, featuring a higher concentration of oxygen vacancies on the surface, but with a lower specific surface area (only 1.2 m²·g^-1). 180-BO@BVO, with oxygen species adsorbed at surface oxygen vacancies carrying a negative charge, achieved an impressive RhB removal efficiency of up to 83.0% through electrostatic interaction with RhB. The adsorption process follows the Langmuir isotherm and the pseudo-second-order kinetic model, suggesting that it is predominantly governed by chemical adsorption. After five cycles of adsorption experiments, the removal efficiency of RhB by composites remained basically unchanged (more than 80%), demonstrating excellent regeneration performance.

本文介绍了一种污水处理方法——光催化-非均相芬顿耦合技术，引导学生以光芬顿降解罗丹明B作为研究对象。采用原位离子交换反应制备硫化FeOCl (FeS/FeOCl)异质结催化剂，表征其结构、形貌和光学性质，并探究其光芬顿降解罗丹明B的性能。该实验易于操作，现象明显，有助于提高本科生的实验操作技能，培养科研能力，并增强环保意识。

采用一步溶剂热法在泡沫镍(NF)基底上原位生长Cu/α-FeOOH纳米复合材料，制备了自支撑Cu/α-FeOOH/NF催化剂。相比于α-FeOOH/NF催化剂，Cu的引入为α-FeOOH的生长提供了更多的附着点，使得催化剂表面更加粗糙，并增大了催化剂与反应物的接触面积。Cu和无定形的α-FeOOH之间存在晶态和非晶态的异质界面，改变了催化剂的电子结构，促进电子从Ni、Fe向Cu转移，从而显著增强了催化剂对甲醇的吸附和氧化。电化学测试表明，Cu/α-FeOOH/NF催化剂具有优异的甲醇氧化反应(MOR)和析氢反应(HER)性能。在Cu/α-FeOOH/NF催化剂同时作为阴极、阳极的Cu/α-FeOOH/NF||Cu/α-FeOOH/NF HER-MOR耦合电解水系统中，达到10 mA·cm^-2电流密度所需的电压比直接全水解系统降低了125 mV，且在较大电压(2.4 V)下能够稳定反应96 h。此外，阳极MOR产生了价值更高的甲酸盐，1.80 V下生成甲酸盐的法拉第效率高达97%。

In this study, a self-calibrating near-infrared fluorescence probe was designed and synthesized based on the dual-fluorophore strategy utilizing methylene blue and coumarin. The probe utilized methylene blue (emission spectrum range: 640-740 nm) and coumarin fluorophore (emission spectrum range: 440-600 nm) as signal output units, thereby achieving effective spectral separation and highly selective detection of HClO. Under physiological pH conditions, HClO triggers an oxidation-cleavage reaction, releasing methylene blue and coumarin, which emit distinct red and green fluorescence, respectively. This dualemission feature enabled rapid HClO detection with two-channel detection limits of 25.13 nmol·L^-1 (green channel) and 31.55 nmol·L^-1 (red channel). Furthermore, in cell imaging experiments, this probe demonstrated excellent cell membrane permeability and low cytotoxicity, successfully enabling the monitoring of both endogenous and exogenous HClO in living cells. By incorporating a two-channel self-calibration system, the probe effectively mitigated signal variations caused by instrumental or environmental interference, substantially improving detection sensitivity and reliability.

以过硫酸铵引发吡咯单体原位聚合形成的三维多孔气凝胶为载体，以二茂铁为金属前驱体，在氩气气氛下通过高温热解法制备出系列不同铁负载量的Fe/N/C催化剂。结果表明，基于气凝胶载体制备的催化剂在酸性介质中展现出优异的氧还原反应(ORR)活性及稳定性。当二茂铁载量为12 mg时制得的催化剂性能最佳，其半波电位达0.691 V(vs RHE)，平均电子转移数为3.97，表明反应过程接近理想的四电子路径。另外，该催化剂经10 000圈循环伏安测试后，半波电位仅衰减11 mV，展现出较好的电化学耐久性。