English

Stability of Ni/SiO₂ in Partial Oxidation of Methane: Effects of W Modification

• LIAN Mengshui ,
• WANG Yali ,
• ZHAO Mingquan ,
• LI Qianqian ,
• WENG Weizheng ,
• XIA Wensheng ^, ,
• WAN Huilin ^,

• Fujian Province Key Laboratory of Theoretical and Computational Chemistry, National Engineering Laboratory for Green Chemical Productions of Alcohols-Ethers-Esters, State Key Laboratory of Physical Chemistry of Solid State Surfaces, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005, Fujian Province, P. R. China

Corresponding author: XIA Wensheng, Email: wsxia@xmu.edu.cn; Tel.: +86-592-3658107; WAN Huilin, Email: hlwan@xmu.edu.cn

• Received Date: 20 May 2018
  Accepted Date: 20 June 2018
  Revised Date: 12 June 2018
  Available Online: 15 June 2019
• Fund Project:

  The project was supported by the National Natural Science Foundation of China (21373169), and PCSIRT (IRT1036)

Abstract: With the discovery and large-scale exploitation of natural gas resources such as shale gas and combustible ice, which are mainly composed of methane, their effective utilization has become a national strategic interest. Partial oxidation of methane (POM) to synthesis gas is one of the important methods for the utilization of natural gas and shale gas resources. The commonly used Ni/SiO₂ catalyst for POM easily deactivates due to carbon deposition on the surface. To solve this problem, a urea precipitation method was employed in this work to prepare Ni-based catalysts modified with different amounts of tungsten (at W/Ni molar ratios of 0, 0.01, 0.03, 0.05, 0.07, and 0.10), and the catalyst stability in POM as well as the role of W were investigated. From characterizations such as X-ray diffraction (XRD), transmission electron microscopy (TEM), temperature-programmed reduction (H₂-TPR), and X-ray photoelectron spectroscopy (XPS), we obtained the following results. The amount of W added to the Ni-based catalysts has a significant influence on their catalytic performances in POM and their physicochemical properties. The particle size of Ni in the catalysts decreases with W addition, and the Ni particle distribution on the support surfaces becomes more uniformed; however, the catalytic activity for POM is not significantly influenced. However, W-modified Ni-based catalysts show an increasing improvement in their stability in POM with increasing W/Ni molar ratio, with an optimum at the W/Ni molar ratio of 0.07; at the W/Ni molar ratio of 0.10, they exhibit a rapid deactivation in POM in a short time. Although interactions between Ni and SiO₂ in the as-prepared catalysts are weak, the presence of adequate tungsten (W/Ni molar ratio of 0.05 and above) in the Ni-based catalysts can reduce the Ni particle size to some extent, and lead to the formation of strong interactions between Ni and W, which leads to an improvement in the dispersion of Ni on the support surface and imparts resistance for Ni particle growth in the POM reaction. The increased interaction between Ni and W changes the chemical state or oxygen affinity of Ni particles on the catalyst surfaces, and some of the partially oxidized Ni species (Ni^δ+) on the catalyst surfaces coexist with reduced Ni species (Ni⁰) during POM. Using an adequate amount of W-modified Ni catalysts results in almost no carbon deposition on the surfaces during POM, but using only a moderate amount results in good catalytic behavior and stability in POM. This finding suggests that the presence of W can not only enhance the anti-coking ability of the Ni-based catalysts and sustain their good stability in POM if the W content is low (i.e., W/Ni molar ratio of 0.07 and below), but also lead to the deactivation of W-modified catalysts in POM if the W content is high (i.e., W/Ni molar ratio of 0.10 and above), due to high oxygen affinity or the presence of more Ni species in oxidized form. In addition, α-WC (tungsten carbide) was identified using XRD to be formed on the surface of the moderate-amount W-modified Ni catalysts after POM, and it could inhibit or eliminate carbon deposition on the Ni-based catalyst surfaces. The catalytic performance evaluation of the catalysts in POM under a long time period confirmed that α-WC is stable.

Key words:
• Partial oxidation of methane
•  /  Stability
•  /  Ni based catalyst
•  /  Modification of tungsten

• 1. [1]

     Chai, R. J.; Zhang, Z. Q.; Chen, P. J.; Zhao, G. F.; Liu, Y.; Lu, Y. Microporous Mesoporous Mater. 2017, 253, 123. doi: 10.1016/j.micromeso.2017.07.005

  2. [2]

     Luo, Z.; Kriz, D. A.; Miao, R.; Kuo, C. H.; Zhong, W.; Guild, C.; He, J. K.; Willis, B.; Dang, Y. L.; Suib, S. L.; et al. Appl. Catal. A 2018, 554, 54. doi: 10.1016/j.apcata.2018.01.020

  3. [3]

     Wang, F.; Li, W. Z.; Lin, J. D.; Chen, Z. Q.; Wang, Y. Appl. Catal. B 2018, 231, 292. doi: 10.1016/j.apcatb.2018.03.018

  4. [4]

     Guo, S. S.; Wang, J. W.; Ding, C. M.; Duan, Q. L.; Ma, Q.; Zhang, K.; Liu, P. Int. J. Hydrog. Energy 2018, 43, 6603. doi: 10.1016/j.ijhydene.2018.02.035

  5. [5]

     Yang, M. H.; Wu, H. H.; Wu, H. Y.; Huang, C. J.; Weng, W. Z.; Chen, M. S.; Wan, H. L. RSC Adv. 2016, 6, 81237. doi: 10.1039/c6ra15358e

  6. [6]

     Kim, D.; Park, G. A.; Lim, J.; Ha, K. S. Chem. Eng. J. 2017, 316, 1011. doi: 10.1016/j.cej.2017.02.014

  7. [7]

     Rodemerck, U.; Schneider, M.; Linke, D. Catal. Commun. 2017, 102, 98. doi: 10.1016/j.catcom.2017.08.031

  8. [8]

     Li, L.; He, S. C.; Song, Y. Y.; Zhao, J.; Ji, W. J.; Au, C. T. J. Catal. 2012, 288, 54. doi: 10.1016/j.jcat.2012.01.004

  9. [9]

     Wang, F. G.; Han, B. L.; Zhang, L. J.; Xu, L. L.; Yu, H.; Shi, W. D. Appl. Catal. B 2018, 235, 26. doi: 10.1016/j.apcatb.2018.04.069

  10. [10]

      Ashok, J.; Bian, Z.; Wang, Z.; Kawi, S. Catal. Sci. Technol. 2018, 8, 1730. doi: 10.1039/c7cy02475d

  11. [11]

      李琪, 侯玉慧, 董玲玉, 黄铭湘, 翁维正, 夏文生, 万惠霖.物理化学学报, 2013, 29, 2245. doi: 10.3866/PKU.WHXB201308201Li, Q.; Hou, Y. H.; Dong, L. Y.; Huang, M. X.; Weng, W. Z.; Xia, W. S.; Wan, H. L. Acta Phys. -Chim. Sin. 2013, 29, 2245. doi: 10.3866/PKU.WHXB201308201

  12. [12]

      Wu, H. J.; Pantaleo, G.; La Parola, V.; Venezia, A. M.; Collard, X.; Aprile, C.; Liotta, L. F. Appl. Catal. B 2014, 156–157, 350. doi: 10.1016/j.apcatb.2014.03.018

  13. [13]

      Zhu, J. Q.; Peng, X. X.; Yao, L.; Tong, D. M.; Hu, C. W. Catal. Sci. Technol. 2012, 2, 529. doi: 10.1039/c1cy00333j

  14. [14]

      王雅莉, 李琪, 翁维正, 夏文生, 万惠霖.物理化学学报, 2016, 32, 2776. doi: 10.3866/PKU.WHXB201608302Wang, Y. L.; Li, Q.; Weng, W. Z.; Xia, W. S.; Wan, H. L. Acta Phys. -Chim. Sin. 2016, 32, 2776. doi: 10.3866/PKU.WHXB201608302

  15. [15]

      Zhao, X. Y.; Li, H. R.; Zhang, J. P.; Shi, L. Y.; Zhang, D. S. Int. J. Hydrog. Energy 2016, 41, 2447. doi: 10.1016/j.ijhydene.2015.10.111

  16. [16]

      Zhang, S. H.; Shi, C.; Chen, B. B.; Zhang, Y. L.; Qiu, J. S. Catal. Commun. 2015, 69, 123. doi: 10.1016/j.catcom.2015.06.003

  17. [17]

      Claridge, J. B.; York, A. P. E.; Brungs, A. J.; Marquez-Alvarez, C.; Sloan, J.; Tsang, S. C.; Green, M. L. H. J. Catal. 1998, 180, 85. doi: 10.1006/jcat.1998.2260

  18. [18]

      李建芬, 肖波, 晏蓉, 易仁金.化学工程2007, 35, 53.Li, J. F.; Xiao, B.; Yan, R.; Yi, R. J. Chem. Eng. 2007, 35, 53.

  19. [19]

      Jiang, J. T.; Wei, X. J.; Xu, C. Y.; Zhou, Z. X.; Zhen, L. J. Magn. Magn. Mater. 2013, 334, 111. doi: 10.1016/j.jmmm.2012.12.036

  20. [20]

      Ding, C. M.; Wang, J. W.; Ai, G. G.; Liu, S. B.; Liu, P.; Zhang, K.; Han, Y. L.; Ma, X. S. Fuel 2016, 175, 1. doi: 10.1016/j.fuel.2016.02.024

  21. [21]

      He, S. F.; Zheng, X. M.; Mo, L. Y.; Yu, W. J.; Wang, H.; Luo, Y. M. MRS Bull. 2014, 49, 108. doi: 10.1016/j.materresbull.2013.08.051

  22. [22]

      Xia, W. S.; Hou, Y. H.; Chang, G.; Weng, W. Z.; Han, G. B.; Wan, H. L. Int. J. Hydrog. Energy 2012, 37, 8343. doi: 10.1016/j.ijhydene.2012.02.141

  23. [23]

      Solsona, B.; López Nieto, J. M.; Concepción, P.; Dejoz, A.; Ivars, F.; Vázquez, M. I. J. Catal. 2011, 280, 28. doi: 10.1016/j.jcat.2011.02.010

  24. [24]

      Venugopal, A.; Naveen Kumar, S.; Ashok, J.; Hari Prasad, D.; Durga Kumari, V.; Prasad, K. B. S.; Subrahmanyam, M. Int. J. Hydrog. Energy 2007, 32, 1782. doi: 10.1016/j.ijhydene.2007.01.007

  25. [25]

      Arbag, H.; Yasyerli, S.; Yasyerli, N.; Dogu, T.; Dogu, G. Top. Catal. 2013, 56, 1695. doi: 10.1007/s11244-013-0105-3

  26. [26]

      Theofanidis, S. A.; Galvita, V. V.; Poelman, H.; Marin, G. B. ACS Catal. 2015, 5, 3028. doi: 10.1021/acscatal.5b00357

  27. [27]

      夏文生, 常刚, 侯玉慧, 翁维正, 万惠霖.物理化学学报, 2011, 27, 1567. doi: 10.3866/PKU.WHXB20110627Xia, W. S.; Chang, G.; Hou, Y. H.; Weng, W. Z.; Wan, H. L. Acta Phys. -Chim. Sin. 2011, 27, 1567. doi: 10.3866/PKU.WHXB20110627

  28. [28]

      夏文生, 陈蓉芳, 王雅莉, 李琪, 翁维正, 万惠霖.厦门大学学报(自然科学版), 2015, 54, 17. doi: 10.6043/j.issn.0438-0479.2015.05.17Xia, W. S.; Chen, R. F.; Wang, Y. L.; Li, Q.; Weng, W. Z.; Wan, H. L. Xiamen Univ. J. Nat. Sci. Ed. 2015, 54, 17. doi: 10.6043/j.issn.0438-0479.2015.05.17

  29. [29]

      Mohammadzadeh Valendar, H.; Yu, D. W.; Barati, M.; Rezaie, H. J. Therm. Anal. Calorim. 2016, 128, 553. doi: 10.1007/s10973-016-5883-y

•