English

Self-Conversion from ZnO Nanorod Arrays to Tubular Structures and Their Applications in Nanoencapsulated Phase-Change Materials

• FENG Yingjie ^1, ,
• WANG Jinping ^2, ,
• LIU Lili ^1, ,
• WANG Xidong ^{1, ,}

• 1.

  College of Engineering, Peking University, Beijing 100871, P. R. China

• 2.

  Beijing Research Institute of Chemical Industry, SINOPEC, Beijing 100013, P. R. China

Corresponding author: WANG Xidong, xidong@pku.edu.cn

• Received Date: 24 May 2018
  Accepted Date: 04 July 2018
  Revised Date: 02 July 2018
  Available Online: 15 June 2019
• Fund Project:

  The project was supported by the Common Development Fund of Beijing, China and the National Natural Science Foundation of China (51472006)

Abstract: In the emerging field of nanoscience, tubular structures have been attracting remarkable interest due to their well-defined geometry, high specific area, and exceptional physical and chemical properties. Among them, oriented ZnO tubular arrays are regarded as promising candidates for various applications such as optoelectronics, solar cells, sensors, field emission, piezoelectrics, and catalysis. Although template-directed and selective dissolution synthesizing strategies are commonly used to prepare ZnO nanotubes, repeatability and large scale preparation are still challenging. In this study, ZnO nanotube arrays were controllably prepared by tuning the hydrothermal parameters, without the use of any additives. The mechanism underlying the self-conversion of ZnO nanorods to nanotubes was comprehensively studied based on the surface energy theory. It has been proved that the metastable top surface of the ZnO nanorods dissolves preferentially to reach a stable state during the hydrothermal growth. The specific surface energy of different crystal faces of ZnO nanorods was calculated using molecular dynamics simulation. The top surface of the ZnO nanorod, the Zn-terminated [0001] face, demonstrated much higher surface free energy than did the lateral faces, which indicated that the self-dissolution of top face (002) is energetically favorable. The self-conversion behavior of ZnO nanorod arrays with different diameters was specifically investigated by adjusting the initial precursor concentration, density of the crystal seed layers, and growth time. The dissolution-crystallization equilibrium concentration, determined by crystal surface energy, was found to be a key factor for the formation of the tubular structure. Notably, the critical equilibrium conditions for the self-conversion of ZnO nanorods to nanotubes, including zinc ion concentration and pH, have been identified by studying parameters corresponding to the dissolution-crystallization equilibrium for the metastable top surface of the ZnO nanorods. The preparation of the ZnO nanotube arrays was successfully accelerated and simplified via two-step procedure: (1) preparation of ZnO nanorod arrays and (2) self-conversion of ZnO nanorods to nanotubes. The preparation method based on the self-conversion mechanism from rods to tubes for polar oxides is simpler and more easily controllable as compared to the reported methods involving variety of additives. Because of the advantages of adaptability to a wide range of substrates, excellent conducting properties, and filling ability, the prepared ZnO nanotube array films were used in encapsulating phase-change materials. The encapsulated phase-change material exhibited excellent heat storage/release properties and heat conductivities. This indicates the potential application of precision devices for temperature control.

Key words:
• ZnO nanotubes
•  /  Crystal surface energy
•  /  Dissolution-crystallization equilibrium
•  /  Self-conversion
•  /  Encapsulated phase-change materials

• 1. [1]

     (a) Greyson, E. C.; Babayan, Y.; Odom, T. W. Adv. Mater. 2004, 16, 1348. doi: 10.1002/adma.200400765
     (b) Greene, L. E.; Law, M.; Tan, D. H.; Montano, M.; Goldberger, J.; Somorjai, G.; Yang, P. D. Nano Lett. 2005, 5, 1231. doi: 10.1021/nl050788p

  2. [2]

     Sun, Y.; Fuge, G. M.; Fox, N. A.; Riley, D. J.; Ashfold, M. N. R. Adv. Mater. 2005, 17, 2477. doi: 10.1002/adma.200500726

  3. [3]

     s(a) Pan, Z. X.; Dai, Z. R.; Wang, Z. L. Science 2001, 291, 1947. doi: 10.1126/science.1058120
     (b) Wen, X. G.; Fang, Y. P.; Pang, Q.; Yang, C. L.; Wang, J. N.; Ge, W. K.; Wong, K. S.; Yang, S. H. J. Phys. Chem. B 2005, 109, 15303. doi: 10.1021/jp052466f

  4. [4]

     (a) Gao, P. X.; Wang, Z. L. J. Am. Chem. Soc. 2003, 125, 11299. doi: 10.1021/ja035569p
     (b) Li, G. R.; Lu, X. H.; Zhao, W. X.; Su, C. Y.; Tong, Y. X. Cryst. Growth Des. 2008, 8, 1276. doi: 10.1021/cg7009995

  5. [5]

     (a) Konenkamp, R.; Word, R. C.; Godinez, M. Nano Lett. 2005, 5, 2005. doi: 10.1021/nl051501r
     (b) Flemban, T. H.; Haque, M. A.; Ajia, I.; Alwadai, N.; Mitra, S.; Wu, T.; Roqan, I. S. ACS Appl. Mater. Interfaces 2017, 9, 37120. doi: 10.1021/acsami.7b09645

  6. [6]

     (a) Valls, I. G.; Cantu, M. L. Energy Environ. Sci. 2009, 2, 19. doi: 10.1002/adma.200400765
     (b) Martinson, A. B.; Elam, J. W.; Hupp, J. T.; Pelin, M. J. Nano Lett. 2007, 7, 2183. doi: 10.1021/nl070160+

  7. [7]

     (a) Yang, K.; She, G. W.; Wang, H.; Ou, X. M.; Zhang, X. H.; Lee, C. S.; Lee, S. T. J. Phys. Chem. C 2009, 113, 20169. doi: 10.1021/jp901894j
     (b) Huang, Y. C.; Chang, S. Y.; Jehng, J. M. J. Phys. Chem. C 2017, 121, 19063. doi: 10.1021/acs.jpcc.7b05806

  8. [8]

     (a) Ye, C.; Bando, Y.; Fang, X.; Shen, G.; Goldberg, D. J. Phys. Chem. C 2007, 111, 12673. doi: 10.1021/jp073928n
     (b) Wang, X.; Zhou, J.; Lao, C.; Song, J.; Xu, N.; Wang, Z. L. Adv. Mater. 2007, 19, 1627. doi: 10.1002/adma.200602467

  9. [9]

     (a) Wang, X.; Song, J.; Liu, J.; Wang, Z. L. Science 2007, 316, 102. doi: 10.1126/science.1139366
     (b) Lu, M. P.; Song, J. H.; Lu, M. Y.; Chen, M. T.; Gao, Y. F.; Chen, L. J.; Wang, Z. L. Nano Lett. 2009, 9, 1223. doi: 10.1021/nl900115y

  10. [10]

      Chouhan, N.; Yeh, C. L.; Hu, S. F.; Liu, R. S.; Chang, W. S.; Chene, K. H. Chem. Comm. 2011, 47, 3493. doi: 10.1039/C0CC05548D

  11. [11]

      赵新飞, 陈浩, 吴昊, 王睿, 崔义, 傅强, 杨帆, 包信和.物理化学学报, 2018, 34, 1373.] doi: 10.3866/PKU.WHXB201804131Zhao, X. F.; Chen, H.; Wu, H.; Wang, R.; Cui, Y.; Fu, Q.; Yang, F.; Bao, X. H. Acta Phys. -Chim. Sin. 2018, 34, 1373. doi: 10.3866/PKU.WHXB201804131

  12. [12]

      Elias, J.; Tena-Zaera, R.; Wang, Y. S.; Lévy-Clément, C. Chem. Mater. 2008, 20, 6633. doi: 10.1021/cm801131t

  13. [13]

      Xu, L. F.; Liao, Q.; Zhang, J. P.; Ai, X. C.; Xu, D. S. J. Phys. Chem. C 2007, 111, 4549. doi: 10.1021/jp068485m

  14. [14]

      Li, G. R.; Lu, X. H.; Zhao, W. X.; Su, C. Y.; Tong, Y. X. Cryst. Growth Des. 2008, 8, 1276. doi: 10.1021/cg7009995

  15. [15]

      Fujimura, N.; Nishihara, T.; Goto, S.; Xu, J. F.; Ito, T. J. Cryst. Growth 1993, 130, 269. doi: 10.1016/0022-0248(93)90861-P

  16. [16]

      Wang, Z. L.; Kong, X. Y.; Zuo, J. M. Phys. Rev. Lett. 2003, 91, 185502. doi: 10.1103/PhysRevLett.91.185502

  17. [17]

      Yu, H. D.; Zhang, Z. P.; Han, M. Y.; Hao, X. T.; Zhu, F. R. J. Am. Chem. Soc. 2005, 127, 2378. doi: 10.1021/ja043121y

  18. [18]

      Zhang, B. P.; Binh, N. T.; Wakatsuki, K.; Segawa, Y.; Yamada, Y.; Usami, N.; Kawasaki, M.; Koinuma, H. J. Phys. Chem. B 2004, 108, 10899. doi: 10.1021/jp048602i

  19. [19]

      Vayssieres, L.; Keis, K.; Hagfeldt, A.; Lindquist, S. E. Chem. Mater. 2001, 13, 4395. doi: 10.1021/cm011160s

  20. [20]

      Matijević, E. Langmuir 1994, 10, 8. doi: 10.1021/la00013a003

  21. [21]

      Vayssieres, L. Adv. Mater. 2003, 15, 464. doi: 10.1002/adma.200390108

  22. [22]

      Pardeshi, S. K.; Patil, A. B. J. Hazard. Mater. 2009, 163, 403. doi: 10.1016/j.jhazmat.2008.06.111

  23. [23]

      Chu, D. W.; Masuda, Y.; Ohji, T.; Kato, K. Langmuir 2010, 26, 2811. doi: 10.1021/la902866a

  24. [24]

      Mondal, S. Appl. Therm. Eng. 2008, 28, 1536. doi: 10.1016/j.applthermaleng.2007.08.009

  25. [25]

      Wu, S. Y.; Zhu, D. S.; Zhang, X. R.; Huang, J. Energy Fuels 2010, 24, 1894. doi: 10.1021/ef9013967

•