氧化钛/氧化石墨纳米复合材料的制备、表征及性能

引用本文: 潘卉, 赵甜, 张予东, 张治军. 氧化钛/氧化石墨纳米复合材料的制备、表征及性能[J]. 物理化学学报, 2013, 29(03): 660-666. doi: 10.3866/PKU.WHXB201212282 shu

Citation: PAN Hui, ZHAO Tian, ZHANG Yu-Dong, ZHANG Zhi-Jun. Preparation, Characterization and Properties of Titania/Graphite Oxide Nanocomposite[J]. Acta Physico-Chimica Sinica, 2013, 29(03): 660-666. doi: 10.3866/PKU.WHXB201212282 shu

氧化钛/氧化石墨纳米复合材料的制备、表征及性能

潘卉 ^1, ,
赵甜 ^1, ,
张予东 ^2, ,
张治军 ^1,

基金项目:
河南省重点实验室项目(122300413205) (122300413205)

河南大学博士后科学研究基金(BH2011054)资助 (BH2011054)

摘要:

采用四氯化钛(TiCl₄)和氧化石墨为主要原料, 通过原位复合的方法制备了氧化钛/氧化石墨(TiO₂/ )纳米复合材料. 采用傅里叶变换红外(FTIR)光谱仪、X射线衍射(XRD)仪、热重-差热分析(TG-DTA)仪、X射线光电子能谱(XPS)、透射电子显微镜(TEM)和扫描电子显微镜(SEM)等手段研究了TiO₂/ 纳米复合材料的结构和性能. 结果表明, 石墨在氧化过程中结构层键合大量含氧官能团, 部分含氧官能团进一步与纳米TiO₂以化学键结合; 复合后氧化石墨原有衍射峰消失. 将TiO₂/ 添加到水性聚氨酯(WPU)中, 制备了TiO₂/ -WPU复合涂膜. 紫外吸收光谱表明, 随着氧化石墨含量的增加, 复合涂膜的紫外吸收能力增强, 当含量达到一定数值时, 涂膜的紫外吸收最强, 随着含量继续增加吸收又呈下降趋势, 存在一较优浓度值. TiO₂/ 的添加显著提高了聚氨酯涂层的抗紫外线性能, 耐磨损性能和热稳定性能.

关键词:

English

Preparation, Characterization and Properties of Titania/Graphite Oxide Nanocomposite

1.
1 Key Laboratory of Ministry of Education for Special Functional Materials, Henan University, Kaifeng 475004, Henan Province, P.R.China;
2 The college of Chemistry and Chemical Engineering, Henan University, Kaifeng 475004, Henan Province, P.R.China
Received Date: 09 October 2012
Available Online: 25 February 2013
Fund Project:
河南省重点实验室项目(122300413205)

河南大学博士后科学研究基金(BH2011054)资助

Abstract:

Titania/graphite oxide (TiO₂/ ) nanocomposites were obtained from a facile in-situ method using titanium tetrachloride (TiCl₄) and . Nanocomposite structures and properties were characterized by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetric-differential thermal analysis (TG-DTA), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and UV-Vis absorption spectroscopy. TiO₂/ nanocomposites could be well dispersed in water, and the addition of waterborne polyurethane (WPU) yielded TiO₂/ -WPU coatings. During oxidation, the graphite structural layer bound with numerous functional groups, some of which were chemically bound TiO₂. The peak disappeared after combining with TiO₂ nanoparticles. UV absorption data indicated an increasing percentage of WPU with increasing content. There was an optimal additive concentration at which the best absorbance results were achieved. The thermal stability and UV and wear resistance of the WPU were greatly improved upon the addition of TiO₂/ .

Key words:

1. [1]
  
  (1) Novoselov, K. S.; Geim, A. K.; Morozov, S. V.; Jiang, D.;Zhang,Y.; Dubonos, S. V.; Gri rieva, I. V.; Firsov, A. A. Science2004, 306, 666. doi: 10.1126/science.1102896
  (1) Novoselov, K. S.; Geim, A. K.; Morozov, S. V.; Jiang, D.;Zhang,Y.; Dubonos, S. V.; Gri rieva, I. V.; Firsov, A. A. Science2004, 306, 666. doi: 10.1126/science.1102896
2. [2]
  (2) Geim, A. K.; Novoselov, K. S. Nature Materials 2007, 6, 183.doi: 10.1038/nmat1849(2) Geim, A. K.; Novoselov, K. S. Nature Materials 2007, 6, 183.doi: 10.1038/nmat1849
3. [3]
  (3) Gao, B.; Peng, C.; Chen, G. Z.; Li Puma, G. Applied CatalysisB: Environmental 2008, 85, 17. doi: 10.1016/j.apcatb.2008.06.027(3) Gao, B.; Peng, C.; Chen, G. Z.; Li Puma, G. Applied CatalysisB: Environmental 2008, 85, 17. doi: 10.1016/j.apcatb.2008.06.027
4. [4]
  (4) Zhang, Y.;Wu, Y.; Chen, M.;Wu, L. Colloids and Surfaces A:Physicochemical and Engineering Aspects 2010, 353, 216. doi: 10.1016/j.colsurfa.2009.11.016(4) Zhang, Y.;Wu, Y.; Chen, M.;Wu, L. Colloids and Surfaces A:Physicochemical and Engineering Aspects 2010, 353, 216. doi: 10.1016/j.colsurfa.2009.11.016
5. [5]
  (5) Chen, J.; Zhou, Y.; Nan, Q.; Sun, Y.; Ye, X.;Wang, Z. AppliedSurface Science 2007, 253, 9154. doi: 10.1016/j.apsusc.2007.05.046(5) Chen, J.; Zhou, Y.; Nan, Q.; Sun, Y.; Ye, X.;Wang, Z. AppliedSurface Science 2007, 253, 9154. doi: 10.1016/j.apsusc.2007.05.046
6. [6]
  (6) Hsu, S.; Chou, C.W.; Tseng, S. M. Macromolecular Materialsand Engineering 2004, 289, 1096.(6) Hsu, S.; Chou, C.W.; Tseng, S. M. Macromolecular Materialsand Engineering 2004, 289, 1096.
7. [7]
  (7) Shah, M. S. A. S.; Nag, M.; Kalagara, T.; Singh, S.; Manorama,S. V. Chemistry of Materials 2008, 20, 2455. doi: 10.1021/cm7033867(7) Shah, M. S. A. S.; Nag, M.; Kalagara, T.; Singh, S.; Manorama,S. V. Chemistry of Materials 2008, 20, 2455. doi: 10.1021/cm7033867
8. [8]
  (8) Marcano, D. C.; Kosynkin, D. V.; Berlin, J. M.; Sinitskii, A.;Sun, Z.; Slesarev, A.; Alemany, L. B.; Lu,W.; Tour, J. M. ACSNano 2010, 4, 4806. doi: 10.1021/nn1006368(8) Marcano, D. C.; Kosynkin, D. V.; Berlin, J. M.; Sinitskii, A.;Sun, Z.; Slesarev, A.; Alemany, L. B.; Lu,W.; Tour, J. M. ACSNano 2010, 4, 4806. doi: 10.1021/nn1006368
9. [9]
  (9) Fan,W.; Lai, Q.; Zhang, Q.;Wang, Y. The Journal of PhysicalChemistry C 2011, 115, 10694. doi: 10.1021/jp2008804(9) Fan,W.; Lai, Q.; Zhang, Q.;Wang, Y. The Journal of PhysicalChemistry C 2011, 115, 10694. doi: 10.1021/jp2008804
10. [10]
  (10) Huang, Q.; Sun, H. J.; Yang, Y. H. Chin. J. Inorg. Chem. 2011,27, 1721. [黄桥, 孙红娟, 杨勇辉. 无机化学学报, 2011, 27,1721.](10) Huang, Q.; Sun, H. J.; Yang, Y. H. Chin. J. Inorg. Chem. 2011,27, 1721. [黄桥, 孙红娟, 杨勇辉. 无机化学学报, 2011, 27,1721.]
11. [11]
  (11) Yang, Y. H.; Sun, H. J.; Peng, T. J.; Huang, Q. Acta Phys. -Chim.Sin. 2011, 27, 736. [杨勇辉, 孙红娟, 彭同江, 黄桥. 物理化学学报, 2011, 27, 736.] doi: 10.3866/PKU.WHXB20110320(11) Yang, Y. H.; Sun, H. J.; Peng, T. J.; Huang, Q. Acta Phys. -Chim.Sin. 2011, 27, 736. [杨勇辉, 孙红娟, 彭同江, 黄桥. 物理化学学报, 2011, 27, 736.] doi: 10.3866/PKU.WHXB20110320
12. [12]
  (12) Hu, B.; Pan, H.; Yu, L. G.;Wang, L. G.; Zhao, L.; Zhang, Z. J.Journal of Inorganic Materials 2011, 26, 1181. [胡宾,潘卉, 余来贵, 王龙阁, 赵磊, 张治军. 无机材料学报,2011, 26, 1181.] doi: 10.3724/SP.J.1077.2011.01181(12) Hu, B.; Pan, H.; Yu, L. G.;Wang, L. G.; Zhao, L.; Zhang, Z. J.Journal of Inorganic Materials 2011, 26, 1181. [胡宾,潘卉, 余来贵, 王龙阁, 赵磊, 张治军. 无机材料学报,2011, 26, 1181.] doi: 10.3724/SP.J.1077.2011.01181
13. [13]
  (13) Zhang, H.; Lv, X.; Li, Y.;Wang, Y.; Li, J. ACS Nano 2009, 4,380.(13) Zhang, H.; Lv, X.; Li, Y.;Wang, Y.; Li, J. ACS Nano 2009, 4,380.
14. [14]
  (14) Han, Z. D.;Wang, J. Q. Chin. J. Inorg. Chem. 2003, 19, 1366.[韩志东, 王建祺. 无机化学学报, 2003, 19, 1366.](14) Han, Z. D.;Wang, J. Q. Chin. J. Inorg. Chem. 2003, 19, 1366.[韩志东, 王建祺. 无机化学学报, 2003, 19, 1366.]
15. [15]
  (15) Zhang, Q.; He,W. Q.; Chen, X. G.; Hu, D. H.; Li, L. J.; Ji, L. L.;Yi, T. Chinese Science Bulletin 2010, 5, 620. [张琼, 贺蕴秋, 陈小刚, 胡栋虎, 李林江, 季伶俐, 尹婷. 科学通报, 2010,5, 620.](15) Zhang, Q.; He,W. Q.; Chen, X. G.; Hu, D. H.; Li, L. J.; Ji, L. L.;Yi, T. Chinese Science Bulletin 2010, 5, 620. [张琼, 贺蕴秋, 陈小刚, 胡栋虎, 李林江, 季伶俐, 尹婷. 科学通报, 2010,5, 620.]
16. [16]
  (16) Shen, J.; Yan, B.; Shi, M.; Ma, H.; Li, N.; Ye, M. J. Mater.Chem. 2011, 21, 3415. doi: 10.1039/c0jm03542d(16) Shen, J.; Yan, B.; Shi, M.; Ma, H.; Li, N.; Ye, M. J. Mater.Chem. 2011, 21, 3415. doi: 10.1039/c0jm03542d
17. [17]
  (17) Li, N.; Liu, G.; Zhen, C.; Li, F.; Zhang, L.; Cheng, H. M.Advanced Functional Materials 2011, 21, 1717. doi: 10.1002/adfm.201002295(17) Li, N.; Liu, G.; Zhen, C.; Li, F.; Zhang, L.; Cheng, H. M.Advanced Functional Materials 2011, 21, 1717. doi: 10.1002/adfm.201002295
18. [18]
  (18) Matsumoto, Y.; Koinuma, M.; Ida, S.; Hayami, S.; Taniguchi, T.;Hatakeyama, K.; Tateishi, H.;Watanabe, Y.; Amano, S.The Journal of Physical Chemistry C 2011, 115, 19280. doi: 10.1021/jp206348s(18) Matsumoto, Y.; Koinuma, M.; Ida, S.; Hayami, S.; Taniguchi, T.;Hatakeyama, K.; Tateishi, H.;Watanabe, Y.; Amano, S.The Journal of Physical Chemistry C 2011, 115, 19280. doi: 10.1021/jp206348s
19. [19]
  (19) Zhang, Y.; Tang, Z. R.; Fu, X.; Xu, Y. J. ACS Nano 2010, 4,7303. doi: 10.1021/nn1024219(19) Zhang, Y.; Tang, Z. R.; Fu, X.; Xu, Y. J. ACS Nano 2010, 4,7303. doi: 10.1021/nn1024219
20. [20]
  (20) Ramanathan, T.; Abdala, A. A.; Stankovich, S.; Dikin, D. A.;Herrera-Alonso, M.; Piner, R. D.; Adamson, D. H.; Schniepp,H. C.; Chen, X.; Ruoff, R. S. Nature Nanotechnology 2008, 3,327. doi: 10.1038/nnano.2008.96(20) Ramanathan, T.; Abdala, A. A.; Stankovich, S.; Dikin, D. A.;Herrera-Alonso, M.; Piner, R. D.; Adamson, D. H.; Schniepp,H. C.; Chen, X.; Ruoff, R. S. Nature Nanotechnology 2008, 3,327. doi: 10.1038/nnano.2008.96
21. [21]
  (21) Huo, X. D.;Wang, Q.; Liang, J.; Zhang, K.; Mu, M. Tribology2012, 32, 133. [霍晓迪, 王青, 梁军, 张凯, 穆明.摩擦学学报, 2012, 32, 133.](21) Huo, X. D.;Wang, Q.; Liang, J.; Zhang, K.; Mu, M. Tribology2012, 32, 133. [霍晓迪, 王青, 梁军, 张凯, 穆明.摩擦学学报, 2012, 32, 133.]
22. [22]
  (22) Mu, M.; Zhou, X.; Xiao, Q.; Liang, J.; Huo, X. Applied SurfaceScience 2012, 258, 8570. doi: 10.1016/j.apsusc.2012.05.051(22) Mu, M.; Zhou, X.; Xiao, Q.; Liang, J.; Huo, X. Applied SurfaceScience 2012, 258, 8570. doi: 10.1016/j.apsusc.2012.05.051
23. [23]
  (23) Gudarzi, M. M.; Sharif, F. Soft Matter 2011, 7, 3432. doi: 10.1039/c0sm01311k(23) Gudarzi, M. M.; Sharif, F. Soft Matter 2011, 7, 3432. doi: 10.1039/c0sm01311k
24. [24]
  (24) Wang, X.; Hu, Y.; Song, L.; Yang, H.; Xing,W.; Lu, H. J. Mater.Chem. 2011, 21, 4222. doi: 10.1039/c0jm03710a(24) Wang, X.; Hu, Y.; Song, L.; Yang, H.; Xing,W.; Lu, H. J. Mater.Chem. 2011, 21, 4222. doi: 10.1039/c0jm03710a
25. [25]
  (25) Liang, Y. Y.;Wang, H. L.; Casalongue, S. H.; Chen, Z.; Dai, H. J.Nano Res. 2010, 3, 701. doi: 10.1007/s12274-010-0033-5
  (25) Liang, Y. Y.;Wang, H. L.; Casalongue, S. H.; Chen, Z.; Dai, H. J.Nano Res. 2010, 3, 701. doi: 10.1007/s12274-010-0033-5

扫一扫看文章

计量

PDF下载量: 1072
文章访问数: 1796
HTML全文浏览量: 54

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

氧化钛/氧化石墨纳米复合材料的制备、表征及性能

English

Preparation, Characterization and Properties of Titania/Graphite Oxide Nanocomposite

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

氧化钛/氧化石墨纳米复合材料的制备、表征及性能

English

Preparation, Characterization and Properties of Titania/Graphite Oxide Nanocomposite

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南： 你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

文章相关

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs