贵金属催化剂上两步法选择性降解有机溶剂型木质素

引用本文: 刘凌涛, 张斌, 李晶, 马丁, 寇元. 贵金属催化剂上两步法选择性降解有机溶剂型木质素[J]. 物理化学学报, 2012, 28(10): 2343-2348. doi: 10.3866/PKU.WHXB201206152 shu

Citation: LIU Ling-Tao, ZHANG Bin, LI Jing, MA Ding, KOU Yuan. Selective Degradation of Organosolv Lignin over Noble Metal Catalyst in a Two-Step Process[J]. Acta Physico-Chimica Sinica, 2012, 28(10): 2343-2348. doi: 10.3866/PKU.WHXB201206152 shu

贵金属催化剂上两步法选择性降解有机溶剂型木质素

基金项目:
国家重点基础研究发展规划项目(973) (2011CB201402)资助 (973) (2011CB201402)

摘要:

使用担载型贵金属催化剂和磷酸在不同温度下通过两步法加氢降解二氧六环木质素. 第一步反应使用Rh/C和浓度为1% (w)的磷酸为催化剂, 在270 ℃和4 MPa氢气气氛下反应后通过气相色谱(GC)和气相色谱-质谱(GC-MS)分析木质素单体和二聚体, 总收率最高可达16.9%. 通过傅里叶变换红外(FTIR)光谱、X射线光电子能谱(XPS)、元素分析(EA)和凝胶渗透色谱(GPC)等方法研究第一步反应产物的变化. 结果发现, 二氧六环木质素中的C－O－C键被打断, 木质素分子量降低, 部分羰基和羧基被脱除. 随着反应温度的上升, 产物的含氧量不断下降, 在270 ℃反应10 h 后氧含量从35% (w)降低至21% (w). 结合不同的表征方法, 提出二氧六环木质素的第一步反应路径. 第二步反应中使用Pd/C和磷酸为催化剂在250 ℃可以将木质素单体、二聚体高选择性地加氢脱氧转化为对应的烃类产物.

关键词:

English

Selective Degradation of Organosolv Lignin over Noble Metal Catalyst in a Two-Step Process

1.
PKU Green Chemistry Center, Beijing National Laboratory for Molecular Sciences, College of Chemistry and Molecular Engineering, Peking University, Beijing 100871, P. R. China
Received Date: 08 May 2012
Available Online: 26 September 2012
Fund Project:
国家重点基础研究发展规划项目(973) (2011CB201402)资助

Abstract:

Dioxane lignin, a typical organosolv lignin, was degraded by supported noble metal catalysts and phosphoric acid by a two-step method at different temperatures. The results showed that under 4 MPa H2 at 270 ℃ using Rh/C and 1% (w) phosphoric acid as catalysts, the highest total yield of the monomers and dimer was 16.9% after the first step, based on gas chromatography (GC) and gas chromatographymass spectrometry (GC-MS) analyses. Moreover, the raw products from the first step were analyzed by Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), element analysis (EA), and gel permeation chromatography (GPC) to improve the understanding of the chemical transformations involved. The results indicated that the C－O－C bond linkages in the dioxane lignin were cleaved to form lower molecular-weight products, resulting in the degradation of lignin, and the carbonyl and carboxyl groups were partly removed. Oxygen content was reduced dramatically with increasing reaction temperature, from 35% (w) to 21% (w) after reacting at 270 ℃ for 10 h. Based on the analysis results, a reaction pathway for the degradation of lignin was proposed. Finally, the products from the first step could be hydrodeoxygenated to alkanes with carbon numbers in the range of gasoline and diesel with high selectivity catalyzed by Pd/C and phosphoric acid at 250 ℃.

Key words:

1. [1]
  
  (1) Huber, G.W.; Iborra, S.; Corma, A. Chem. Rev. 2006, 106, 4044.doi: 10.1021/cr068360d
  (1) Huber, G.W.; Iborra, S.; Corma, A. Chem. Rev. 2006, 106, 4044.doi: 10.1021/cr068360d
2. [2]
  (2) Huber, G.W.; Chheda, J. N.; Barrett, C. J.; Dumesic, J. A.Science 2005, 308, 1446.(2) Huber, G.W.; Chheda, J. N.; Barrett, C. J.; Dumesic, J. A.Science 2005, 308, 1446.
3. [3]
  (3) Rinaldi, R.; Palkovits, R.; Schueth, F. Angew. Chem. Int. Edit.2008, 47, 8047. doi: 10.1002/anie.200802879(3) Rinaldi, R.; Palkovits, R.; Schueth, F. Angew. Chem. Int. Edit.2008, 47, 8047. doi: 10.1002/anie.200802879
4. [4]
  (4) Deng, L.; Li, J.; Lai, D. M.; Fu, Y.; Guo, Q. X. Angew. Chem. Int. Edit. 2009, 48, 6529. doi: 10.1002/anie.200902281(4) Deng, L.; Li, J.; Lai, D. M.; Fu, Y.; Guo, Q. X. Angew. Chem. Int. Edit. 2009, 48, 6529. doi: 10.1002/anie.200902281
5. [5]
  (5) Bond, J. Q.; Alonso, D. M.;Wang, D.;West, R. M.; Dumesic, J.A. Science 2010, 327, 1110. doi: 10.1126/science.1184362(5) Bond, J. Q.; Alonso, D. M.;Wang, D.;West, R. M.; Dumesic, J.A. Science 2010, 327, 1110. doi: 10.1126/science.1184362
6. [6]
  (6) Bozell, J. J. Science 2010, 329, 522. doi: 10.1126/science.1191662(6) Bozell, J. J. Science 2010, 329, 522. doi: 10.1126/science.1191662
7. [7]
  (7) Geilen, F. M. A.; Engendahl, B.; Harwardt, A.; Marquardt,W.;Klankermayer, J.; Leitner,W. Angew. Chem. Int. Edit. 2010, 49,5510. doi: 10.1002/anie.201002060(7) Geilen, F. M. A.; Engendahl, B.; Harwardt, A.; Marquardt,W.;Klankermayer, J.; Leitner,W. Angew. Chem. Int. Edit. 2010, 49,5510. doi: 10.1002/anie.201002060
8. [8]
  (8) Corma, A.; de la Torre, O.; Renz, M.; Villandier, N. Angew. Chem. Int. Edit. 2011, 50, 2375.(8) Corma, A.; de la Torre, O.; Renz, M.; Villandier, N. Angew. Chem. Int. Edit. 2011, 50, 2375.
9. [9]
  (9) Du, X. L.; He, L.; Zhao, S.; Liu, Y. M.; Cao, Y.; He, H. Y.; Fan,K. N. Angew. Chem. Int. Edit. 2011, 50, 7815. doi: 10.1002/anie.201100102(9) Du, X. L.; He, L.; Zhao, S.; Liu, Y. M.; Cao, Y.; He, H. Y.; Fan,K. N. Angew. Chem. Int. Edit. 2011, 50, 7815. doi: 10.1002/anie.201100102
10. [10]
  (10) Rackemann, D.W.; Doherty,W. O. S. Biofuel. Bioprod. Bior.2011, 5, 198. doi: 10.1002/bbb.267(10) Rackemann, D.W.; Doherty,W. O. S. Biofuel. Bioprod. Bior.2011, 5, 198. doi: 10.1002/bbb.267
11. [11]
  (11) Fukuoka, A.; Dhepe, P. L. Angew. Chem. Int. Edit. 2006, 45,5161. doi: 10.1002/anie.200601921(11) Fukuoka, A.; Dhepe, P. L. Angew. Chem. Int. Edit. 2006, 45,5161. doi: 10.1002/anie.200601921
12. [12]
  (12) Luo, C.;Wang, S.; Liu, H. Angew. Chem. Int. Edit. 2007, 46,7636. doi: 10.1002/anie.200702661(12) Luo, C.;Wang, S.; Liu, H. Angew. Chem. Int. Edit. 2007, 46,7636. doi: 10.1002/anie.200702661
13. [13]
  (13) Ji, N.; Zhang, T.; Zheng, M.;Wang, A.;Wang, H.;Wang, X.;Chen, J. G. Angew. Chem. Int. Edit. 2008, 47, 8510. doi: 10.1002/anie.200803233(13) Ji, N.; Zhang, T.; Zheng, M.;Wang, A.;Wang, H.;Wang, X.;Chen, J. G. Angew. Chem. Int. Edit. 2008, 47, 8510. doi: 10.1002/anie.200803233
14. [14]
  (14) Zhao, H.; Holladay, J. E.; Brown, H.; Zhang, Z. C. Science2007, 316, 1597. doi: 10.1126/science.1141199(14) Zhao, H.; Holladay, J. E.; Brown, H.; Zhang, Z. C. Science2007, 316, 1597. doi: 10.1126/science.1141199
15. [15]
  (15) Binder, J. B.; Raines, R. T. J. Am. Chem. Soc. 2009, 131, 1979.doi: 10.1021/ja808537j(15) Binder, J. B.; Raines, R. T. J. Am. Chem. Soc. 2009, 131, 1979.doi: 10.1021/ja808537j
16. [16]
  (16) Zhang, Z.; Zhao, Z. K. Bioresource Technol. 2010, 101, 1111.doi: 10.1016/j.biortech.2009.09.010(16) Zhang, Z.; Zhao, Z. K. Bioresource Technol. 2010, 101, 1111.doi: 10.1016/j.biortech.2009.09.010
17. [17]
  (17) Mascal, M.; Nikitin, E. B. Angew. Chem. Int. Edit. 2008, 47,7924. doi: 10.1002/anie.200801594(17) Mascal, M.; Nikitin, E. B. Angew. Chem. Int. Edit. 2008, 47,7924. doi: 10.1002/anie.200801594
18. [18]
  (18) Hu, S.; Zhang, Z.; Song, J.; Zhou, Y.; Han, B. Green Chem.2009, 11, 1746. doi: 10.1039/b914601f(18) Hu, S.; Zhang, Z.; Song, J.; Zhou, Y.; Han, B. Green Chem.2009, 11, 1746. doi: 10.1039/b914601f
19. [19]
  (19) Yan, N.; Zhao, C.; Gan,W. J.; Kou, Y. Chin. J. Catal. 2006, 27,1159. [颜宁, 赵晨, 甘维佳, 寇元. 催化学报, 2006, 27,1159.](19) Yan, N.; Zhao, C.; Gan,W. J.; Kou, Y. Chin. J. Catal. 2006, 27,1159. [颜宁, 赵晨, 甘维佳, 寇元. 催化学报, 2006, 27,1159.]
20. [20]
  (20) Yan, N.; Zhao, C.; Luo, C.; Dyson, P. J.; Liu, H.; Kou, Y. J. Am. Chem. Soc. 2006, 128, 8714. doi: 10.1021/ja062468t(20) Yan, N.; Zhao, C.; Luo, C.; Dyson, P. J.; Liu, H.; Kou, Y. J. Am. Chem. Soc. 2006, 128, 8714. doi: 10.1021/ja062468t
21. [21]
  (21) Pepper, J. M.; Rahman, M. D. Cell. Chem. Technol. 1987, 21,233.(21) Pepper, J. M.; Rahman, M. D. Cell. Chem. Technol. 1987, 21,233.
22. [22]
  (22) Thring, R.W.; Katikaneni, S. P. R.; Bakhshi, N. N. Fuel Process. Technol. 2000, 62, 17. doi: 10.1016/S0378-3820(99)00061-2(22) Thring, R.W.; Katikaneni, S. P. R.; Bakhshi, N. N. Fuel Process. Technol. 2000, 62, 17. doi: 10.1016/S0378-3820(99)00061-2
23. [23]
  (23) Jackson, M. A.; Compton, D. L.; Boateng, A. A. J. Anal. Appl. Pyrol. 2009, 85, 226. doi: 10.1016/j.jaap.2008.09.016(23) Jackson, M. A.; Compton, D. L.; Boateng, A. A. J. Anal. Appl. Pyrol. 2009, 85, 226. doi: 10.1016/j.jaap.2008.09.016
24. [24]
  (24) Stark, K.; Taccardi, N.; Bosmann, A.;Wasserscheid, P.ChemSusChem 2010, 3, 719. doi: 10.1002/cssc.200900242(24) Stark, K.; Taccardi, N.; Bosmann, A.;Wasserscheid, P.ChemSusChem 2010, 3, 719. doi: 10.1002/cssc.200900242
25. [25]
  (25) Zakzeski, J.; Bruijnincx, P. C. A.; Jongerius, A. L.;Weckhuysen,B. M. Chem. Rev. 2010, 110, 3552. doi: 10.1021/cr900354u(25) Zakzeski, J.; Bruijnincx, P. C. A.; Jongerius, A. L.;Weckhuysen,B. M. Chem. Rev. 2010, 110, 3552. doi: 10.1021/cr900354u
26. [26]
  (26) Yan, N.; Zhao, C.; Dyson, P. J.;Wang, C.; Liu, L. T.; Kou, Y.ChemSusChem 2008, 1, 626. doi: 10.1002/cssc.200800080(26) Yan, N.; Zhao, C.; Dyson, P. J.;Wang, C.; Liu, L. T.; Kou, Y.ChemSusChem 2008, 1, 626. doi: 10.1002/cssc.200800080
27. [27]
  (27) Zhao, C.; Kou, Y.; Lemonidou, A. A.; Li, X.; Lercher, J. A.Angew. Chem. Int. Edit. 2009, 48, 3987. doi: 10.1002/anie.200900404(27) Zhao, C.; Kou, Y.; Lemonidou, A. A.; Li, X.; Lercher, J. A.Angew. Chem. Int. Edit. 2009, 48, 3987. doi: 10.1002/anie.200900404
28. [28]
  (28) Zhao, C.; Kou, Y.; Lemonidou, A. A.; Li, X.; Lercher, J. A.Chem. Commun. 2010, 46, 412.(28) Zhao, C.; Kou, Y.; Lemonidou, A. A.; Li, X.; Lercher, J. A.Chem. Commun. 2010, 46, 412.
29. [29]
  (29) Zhao, C.; He, J.; Lemonidou, A. A.; Li, X.; Lercher, J. A.J. Catal. 2011, 280, 8. doi: 10.1016/j.jcat.2011.02.001(29) Zhao, C.; He, J.; Lemonidou, A. A.; Li, X.; Lercher, J. A.J. Catal. 2011, 280, 8. doi: 10.1016/j.jcat.2011.02.001
30. [30]
  (30) Yan, N.; Yuan, Y.; Dykeman, R.; Kou, Y.; Dyson, P. J. Angew. Chem. Int. Edit. 2010, 49, 5549. doi: 10.1002/anie.201001531(30) Yan, N.; Yuan, Y.; Dykeman, R.; Kou, Y.; Dyson, P. J. Angew. Chem. Int. Edit. 2010, 49, 5549. doi: 10.1002/anie.201001531
31. [31]
  (31) Pepper, J. M.; Siddiqueullah, M. Can. J. Chem. 1961, 39, 1454.doi: 10.1139/v61-185(31) Pepper, J. M.; Siddiqueullah, M. Can. J. Chem. 1961, 39, 1454.doi: 10.1139/v61-185
32. [32]
  (32) Derkacheva, O.; Sukhov, D. Macromol. Symp. 2008, 265, 61.doi: 10.1002/masy.200850507(32) Derkacheva, O.; Sukhov, D. Macromol. Symp. 2008, 265, 61.doi: 10.1002/masy.200850507
33. [33]
  (33) He, J. X.; Zhang,W.; Li, K. J.; Cui, S. Z.;Wang, S. Y. J. Text. Res. 2009, 30, 13. [何建新, 章伟, 李克兢, 崔世忠, 王善元.纺织学报, 2009, 30, 13.](33) He, J. X.; Zhang,W.; Li, K. J.; Cui, S. Z.;Wang, S. Y. J. Text. Res. 2009, 30, 13. [何建新, 章伟, 李克兢, 崔世忠, 王善元.纺织学报, 2009, 30, 13.]
34. [34]
  (34) Jung, H. J. G.; Himmelsbach, D. S. J. Agric. Food Chem. 1989,81.(34) Jung, H. J. G.; Himmelsbach, D. S. J. Agric. Food Chem. 1989,81.
35. [35]
  (35) Zhang, A. P.; Liu, C. F.; Sun, R. C. Ind. Crop. Prod. 2010, 31,357. doi: 10.1016/j.indcrop.2009.12.003(35) Zhang, A. P.; Liu, C. F.; Sun, R. C. Ind. Crop. Prod. 2010, 31,357. doi: 10.1016/j.indcrop.2009.12.003
36. [36]
  (36) Faix, O. Holzforschung 1991, 45 (Suppl.), 21.(36) Faix, O. Holzforschung 1991, 45 (Suppl.), 21.
37. [37]
  (37) Dorris, G. M.; Gray, D. G. Cell. Chem. Technol. 1978, 12, 9.
  (37) Dorris, G. M.; Gray, D. G. Cell. Chem. Technol. 1978, 12, 9.

扫一扫看文章

计量

PDF下载量: 810
文章访问数: 2868
HTML全文浏览量: 77

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

贵金属催化剂上两步法选择性降解有机溶剂型木质素

English

Selective Degradation of Organosolv Lignin over Noble Metal Catalyst in a Two-Step Process

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

贵金属催化剂上两步法选择性降解有机溶剂型木质素

English

Selective Degradation of Organosolv Lignin over Noble Metal Catalyst in a Two-Step Process

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南： 你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

文章相关

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs