引用本文:
何静, 郭瑞, 蓝明艳, 王灿, 唐谟堂, 杨建广, 杨声海, 唐朝波, 鲁君乐. 微电流作用下铁片置换海绵铋粉[J]. 应用化学,
2013, 30(10): 1182-1188.
doi:
10.3724/SP.J.1095.2013.20612
Citation: HE Jing, GUO Rui, LAN Mingyan, WANG Can, TANG Motang, YANG Jianguang, YANG Shenghai, TANG Chaobo, LU Junle. Replacement of Sponge Powder Bismuth with Iron Plates Under Micro-current[J]. Chinese Journal of Applied Chemistry, 2013, 30(10): 1182-1188. doi: 10.3724/SP.J.1095.2013.20612
Citation: HE Jing, GUO Rui, LAN Mingyan, WANG Can, TANG Motang, YANG Jianguang, YANG Shenghai, TANG Chaobo, LU Junle. Replacement of Sponge Powder Bismuth with Iron Plates Under Micro-current[J]. Chinese Journal of Applied Chemistry, 2013, 30(10): 1182-1188. doi: 10.3724/SP.J.1095.2013.20612
微电流作用下铁片置换海绵铋粉
English
Replacement of Sponge Powder Bismuth with Iron Plates Under Micro-current
Abstract:
The sponge powder bismuth replaced by powder iron is low grade. In order to overcome such problem,new approach for producing sponge powder bismuth is developed with the use of iron plates under micro-current. The grade of the obtained sponge powder bismuth is over 90%,which is replaced by iron plates with the use of iron plates as the anode,graphite as the cathode,and the current density is 5 × 10-3 A/cm2at a temperature of 40℃. Studies on the replacement process have shown that the replacement process meets the first-order reaction rate law,with the activation energy Ea=13.72 kJ/mol,and the reaction is diffusion-controlled. The reaction rate equation is v=3.2470 × c(Bi3+) exp(-(13720)/(RT)). Electrochemical analysis shows that the micro-current promotes the replacement process,and the obtained sponge powder bismuth is high grade with fewer impurities,in particular,the lead content is significantly reduced.
-
Key words:
- micro-current
- / iron plates
- / replacement
- / sponge bismuth
- / dynamics
-
-
扫一扫看文章
计量
- PDF下载量: 0
- 文章访问数: 624
- HTML全文浏览量: 59
下载:
