Simultaneous Improvements of Thermal Stability and Mechanical Properties of Poly(propylene carbonate) via Incorporation of Environmental-friendly Polydopamine

Yu-han Li ,  Mi Zhou ,  Cheng-zhen Geng ,  Feng Chen ,  Qiang Fu

Citation:  Yu-han Li, Mi Zhou, Cheng-zhen Geng, Feng Chen, Qiang Fu. Simultaneous Improvements of Thermal Stability and Mechanical Properties of Poly(propylene carbonate) via Incorporation of Environmental-friendly Polydopamine[J]. Chinese Journal of Polymer Science, 2014, 32(12): 1724-1736. doi: 10.1007/s10118-014-1518-6 shu

Simultaneous Improvements of Thermal Stability and Mechanical Properties of Poly(propylene carbonate) via Incorporation of Environmental-friendly Polydopamine

  • 基金项目:

    This work was financially supported by the National Natural Science Foundation of China (Nos. 51173112 and 21274095).

摘要: Inspired by the photoprotection, radical scavenging of melanin together with versatile adhesive ability of mussel proteins, polydopamine (PDA) nanoparticles were successfully prepared and incorporated into environmentally friendly polymer, poly(propylene carbonate) (PPC) via solvent blending. The prepared composites exhibited excellent thermal stability in air and nitrogen atmosphere and extraordinary mechanical properties. The composites displayed eminent increase of temperature at 5% weight loss (T5%) by 30-100 K with 0.3 wt%-2.0 wt% loadings, meanwhile, the tensile strength and Young's modulus were significantly improved from 11.5 MPa and 553.7 MPa to 40.5 MPa and 2411.2 MPa, respectively. The kinetic calculation indicated that improvement of T5% is presumably derived from suppressing chain-end unzipping. The glass transition temperature (Tg) of the PPC/PDA composites increased by 8-10 K. This is probably due to hydrogen bondinginteraction since the abundant proton donors along PDA chains would interact with proton acceptors like C=O and C―O―C in PPC which would cause restriction of segmental motion of PPC chains.

English


    1. [1]

      Inoue, S., Koinuma, H. and Tsuruta, T., J. Polym. Sci. Polym. Lett., 1969, 7(4): 287

    2. [2]

      Chen. X., Shen, Z. and Zhang, Y., Macromolecules, 1991, 24(19): 5305

    3. [3]

      Darensbourg, D.J., Chem. Rev., 2007, 107(6): 2388

    4. [4]

      Darensbourg, D.J. and Holtcamp, M.W., Macromolecules. 1995, 28(22): 7577

    5. [5]

      Peng, S., An. Y., Chen, C., Fei, B., Zhuang, Y. and Dong, L., Polym. Degrad. Stab., 2003, 80(1): 141

    6. [6]

      Zhang, Z., Shi, Q., Peng, J., Song, J., Chen, Q., Yang, J., Gong, Y., Ji, R., He, X. and Lee, J.H., Polymer, 2006, 47(26): 8548

    7. [7]

      Yao, M., Mai, F., Deng, H., Ning, N., Wang, K. and Fu, Q., J. Appl. Polym. Sci., 2011, 120(6): 3565

    8. [8]

      Yao, M., Deng, H., Mai, F., Wang, K., Zhang, Q., Chen, F. and Fu, Q., Express Polym. Lett., 2011, 5(11): 937

    9. [9]

      Yu, T., Zhou, Y., Liu, K., Zhao, Y., Chen, E., Wang, F. and Wang, D., Polym. Degrad. Stab., 2009, 94(2): 253

    10. [10]

      Gao, J., Chen, F., Wang, K., Deng, H., Zhang, Q., Bai, H. and Fu, Q., J. Mater. Chem., 2011, 21(44): 17627

    11. [11]

      Bian, J., Wei, X.W., Lin, H.L., Gong, S.J., Zhang, H. and Guan, Z.P., Polym. Degrad. Stab., 2011, 96(10): 1833

    12. [12]

      Shi, X. and Gan, Z., Eur. Polym. J., 2007, 43(12): 4852

    13. [13]

      Chen, L., Qin, Y., Wang, X., Zhao, X. and Wang, F., Polymer, 2011, 52(21): 4873

    14. [14]

      Qin, Y., Chen, L., Wang, X., Zhao, X. and Wang, F., Carbohyd. Polym., 2011, 84(1): 329

    15. [15]

      Wang, X.L., Li, R.K.Y., Cao, Y.X. and Meng, Y.Z., Mater. Design, 2007, 28(6): 1934

    16. [16]

      Zeng, S., Wang, S., Xiao, M., Han, D. and Meng, Y., Carbohyd. Polym., 2011, 86(3): 1260

    17. [17]

      Ge, X.C., Zhu, Q. and Meng, Y.Z., J. Appl. Polym. Sci., 2006, 99(3): 782

    18. [18]

      Ma, X., Yu, J. and Zhao, A., Compos. Sci. Technol., 2006, 66(13): 2360

    19. [19]

      Chen, L., Qin, Y., Wang, X., Li, Y., Zhao, X. and Wang, F., Polym. Int., 2011, 60(12): 1697

    20. [20]

      Lee, H., Dellatore, S.M. and Miller, W.M., Science, 2007, 318(5849): 426

    21. [21]

      Ye, Q., Zhou, F. and Liu, W., Chem. Soc. Rev., 2011, 40(7): 4244

    22. [22]

      Lee, H., Lee, B.P. and Messersmith, P.B., Nature, 2007, 448(7151): 338

    23. [23]

      Phua, S.L., Yang, L., Toh, C.L., Huang, S., Tsakadze, Z., Lau, S.K., Mai, Y.W. and Lu, X., Acs Appl. Mater. Inter., 2012, 4(9): 4571

    24. [24]

      Ortonne, J.P., Brit. J. Dermatol., 2002, 146(s61): 7

    25. [25]

      Simon, J.D., Accounts Chem. Res., 2000, 33(5): 307

    26. [26]

      Meredith, P. and Sarna, T., Pigm. Cell Res., 2006, 19(6): 572

    27. [27]

      Ju, K.Y., Lee, Y., Lee, S., Park, S.B. and Lee, J.K., Biomacromolecules, 2011, 12(3): 625

    28. [28]

      Shanmuganathan, K., Cho, J.H., Iyer, P., Baranowitz, S. and Ellison, C.J., Macromolecules, 2011, 44(24): 9499

    29. [29]

      Phua, S.L., Yang, L., Toh, C.L., Guoqiang, D., Lau, S.K., Dasari, A. and Lu, X., Acs Appl. Mate. Inter., 2013, 5(4): 1302

    30. [30]

      Xi, Z., Xu, Y., Zhu, L., Wang, Y. and Zhu, B., J. Membr. Sci., 2009, 327(1-2): 244

    31. [31]

      Zhang, Z., Lee, J.H., Lee, S.H., Heo, S.B. and Pittman. Jr. C.U., Polymer, 2008, 49(12): 2947

    32. [32]

      Xu, J., Li, R.K.Y., Meng, Y.Z. and Mai, Y.W., Mater. Res. Bull., 2006, 41(2): 244

    33. [33]

      Chang, W.L., J. Appl. Polym. Sci., 1994, 53(13): 1759

    34. [34]

      Khan, S., Akhtar, K., Seo, J., Han, H. and Rub, M., Chinese J. Polym . Sci., 2012, 30(5): 735

    35. [35]

      Anderson, T.H., Yu, J., Estrada, A., Hammer, M.U., Waite, J.H. and Israelachvili, J.N., Adv. Funct. Mater., 2010, 20(23): 4196

    36. [36]

      Waite, J.H., Nat. Mater., 2008, 7(1): 8

    37. [37]

      Du, L., Qu, B., Meng, Y. and Zhu, Q., Compos. Sci. Technol., 2006, 66(7-8): 913

    38. [38]

      Chen, W.F., Pang, M.Z., Xiao, M., Wang, S.J., Wen, L.S. and Meng, Y.Z., J. Reinf. Plast. Comp., 2010, 29(10): 1545

    39. [39]

      R?anowska, M., Sarna, T., Land, E.J. and Truscott, T.G., Free Radical Bio. Med., 1999, 26(5-6): 518

  • 加载中
计量
  • PDF下载量:  0
  • 文章访问数:  2063
  • HTML全文浏览量:  65
文章相关
  • 发布日期:  2014-12-05
  • 收稿日期:  2014-04-15
  • 修回日期:  2014-05-28
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

/

返回文章