2027 Volume 38 Issue 1
2027, 38(1): 111995
doi: 10.1016/j.cclet.2025.111995
Abstract:
All-solid-state batteries (ASSBs) are regarded as cornerstones of next-generation energy storage technologies because of their high safety and energy density. However, the instability of the lithium metal anode interface during plating and stripping processes severely limits its practical application. From a game-theoretic perspective, this paper conceptualizes lithium plating and stripping as a dynamic “strategic game” and systematically analyzes the symmetry breaking of interfacial behavior, critical instability mechanisms, and their correlation with the electrolyte system under multiphysics coupling. The study reveals an intrinsic asymmetry between plating and stripping: Plating is governed by the electron supply, interfacial energy barriers, and stress distribution, manifesting as “directional competition”, whereas stripping is constrained by lithium desorption and electron pathways and is prone to forming “dead lithium” and interfacial voids, which further degrade subsequent cycles. By modulating multiple factors, such as the interfacial composition, mechanical pressure, and electrolyte type, the system can be guided to transition from a noncooperative game toward dynamic equilibrium. This work also compares the strategic characteristics and limitations of polymer, sulfide, and oxide electrolytes in the “interfacial game”, highlighting that hybrid electrolytes and smart interface designs are crucial for achieving long-term stable cycling. Finally, future directions toward “intelligent interface governance” through artificial intelligence, self-healing interfaces, and system-level codesign are proposed.
All-solid-state batteries (ASSBs) are regarded as cornerstones of next-generation energy storage technologies because of their high safety and energy density. However, the instability of the lithium metal anode interface during plating and stripping processes severely limits its practical application. From a game-theoretic perspective, this paper conceptualizes lithium plating and stripping as a dynamic “strategic game” and systematically analyzes the symmetry breaking of interfacial behavior, critical instability mechanisms, and their correlation with the electrolyte system under multiphysics coupling. The study reveals an intrinsic asymmetry between plating and stripping: Plating is governed by the electron supply, interfacial energy barriers, and stress distribution, manifesting as “directional competition”, whereas stripping is constrained by lithium desorption and electron pathways and is prone to forming “dead lithium” and interfacial voids, which further degrade subsequent cycles. By modulating multiple factors, such as the interfacial composition, mechanical pressure, and electrolyte type, the system can be guided to transition from a noncooperative game toward dynamic equilibrium. This work also compares the strategic characteristics and limitations of polymer, sulfide, and oxide electrolytes in the “interfacial game”, highlighting that hybrid electrolytes and smart interface designs are crucial for achieving long-term stable cycling. Finally, future directions toward “intelligent interface governance” through artificial intelligence, self-healing interfaces, and system-level codesign are proposed.
2027, 38(1): 111997
doi: 10.1016/j.cclet.2025.111997
Abstract:
The oxygen reduction reaction plays a pivotal role in advancing sustainable energy solutions such as fuel cells and metal-air batteries. However, the slow reaction kinetics inherent to this process demand the creation of efficient catalytic systems. Strain modulation has become an essential approach for precisely adjusting ORR performance through controlled modification of electronic configurations and surface adsorption characteristics at active sites. In this comprehensive review, the application of strain engineering in heterogeneous ORR catalysts was systematically investigated. The review initially details the principles governing ORR mechanisms. Subsequently, it classifies different strain generation sources, which encompass lattice mismatch in alloys, core-shell interfacial distortion, curvature induced by size and shape, defect-generated local stress, and substrate-imposed constraints. Regarding cost-effective alternatives, the investigation explores strain influences on metal-free carbon materials, M-N-C single-atom catalysts, and transition metal oxides/nitrides, are discussed, uncovering universal relationships between strain and catalytic activity. The review further elucidates the mechanistic connections between the magnitude and direction of strain and key catalytic descriptors, such as d-band center shifts and hydroxyl (OH) adsorption strength. Finally, current limitations in strain engineering approaches are critically assessed, while future research directions are proposed for developing advanced catalyst systems through synergistic integration of novel fabrication strategies and predictive computational modeling.
The oxygen reduction reaction plays a pivotal role in advancing sustainable energy solutions such as fuel cells and metal-air batteries. However, the slow reaction kinetics inherent to this process demand the creation of efficient catalytic systems. Strain modulation has become an essential approach for precisely adjusting ORR performance through controlled modification of electronic configurations and surface adsorption characteristics at active sites. In this comprehensive review, the application of strain engineering in heterogeneous ORR catalysts was systematically investigated. The review initially details the principles governing ORR mechanisms. Subsequently, it classifies different strain generation sources, which encompass lattice mismatch in alloys, core-shell interfacial distortion, curvature induced by size and shape, defect-generated local stress, and substrate-imposed constraints. Regarding cost-effective alternatives, the investigation explores strain influences on metal-free carbon materials, M-N-C single-atom catalysts, and transition metal oxides/nitrides, are discussed, uncovering universal relationships between strain and catalytic activity. The review further elucidates the mechanistic connections between the magnitude and direction of strain and key catalytic descriptors, such as d-band center shifts and hydroxyl (OH) adsorption strength. Finally, current limitations in strain engineering approaches are critically assessed, while future research directions are proposed for developing advanced catalyst systems through synergistic integration of novel fabrication strategies and predictive computational modeling.
2027, 38(1): 112087
doi: 10.1016/j.cclet.2025.112087
Abstract:
Rechargeable magnesium-ion batteries (MIBs) have attracted much attention, driven by high theoretical volumetric capacity, large natural abundance, cost-effectiveness, and inherent safety. The intercalation-type cathodes with superior structural stability during (de)magnesiation have become the preferred choice for non-aqueous MIBs. However, the high charge density and strong polarization of the divalent Mg2+ ion led to sluggish diffusion kinetics of Mg2+, which triggered limited rate capability and cycling stability of intercalation-type cathode materials. To alleviate these problems, researchers have proposed manifold modification strategies in the intercalation-type cathodes. Therefore, a comprehensive and systematic review of the magnesium storage mechanisms and recent advances focusing on intercalation-type cathode materials is of great significance for promoting the further development of MIBs. This review firstly outlines the fundamental requirements for intercalation-type cathodes in MIBs. Subsequently, the magnesium storage mechanisms and key challenges of intercalation-type materials with various diffusion channels are reviewed. Furthermore, the primary modification strategies and their practical applications are discussed and analyzed to examine the mechanisms and advantages of each strategy. Finally, the crucial application issues and future research trends are proposed to offer a theoretical foundation and strategic insight for designing and developing high-performance cathode materials in MIBs.
Rechargeable magnesium-ion batteries (MIBs) have attracted much attention, driven by high theoretical volumetric capacity, large natural abundance, cost-effectiveness, and inherent safety. The intercalation-type cathodes with superior structural stability during (de)magnesiation have become the preferred choice for non-aqueous MIBs. However, the high charge density and strong polarization of the divalent Mg2+ ion led to sluggish diffusion kinetics of Mg2+, which triggered limited rate capability and cycling stability of intercalation-type cathode materials. To alleviate these problems, researchers have proposed manifold modification strategies in the intercalation-type cathodes. Therefore, a comprehensive and systematic review of the magnesium storage mechanisms and recent advances focusing on intercalation-type cathode materials is of great significance for promoting the further development of MIBs. This review firstly outlines the fundamental requirements for intercalation-type cathodes in MIBs. Subsequently, the magnesium storage mechanisms and key challenges of intercalation-type materials with various diffusion channels are reviewed. Furthermore, the primary modification strategies and their practical applications are discussed and analyzed to examine the mechanisms and advantages of each strategy. Finally, the crucial application issues and future research trends are proposed to offer a theoretical foundation and strategic insight for designing and developing high-performance cathode materials in MIBs.
2027, 38(1): 112398
doi: 10.1016/j.cclet.2026.112398
Abstract:
Carbon dots (CDs), zero-dimensional carbon-based nanomaterials typically composed of sp2/sp3-hybridized carbon skeletons and abundant surface functional groups/polymer chains. CDs have a unique structure that is different from GOs and CNTs. Their nanoscale size (<10 nm) contributes to the formation of nucleation and pore-filling effects. Which contributes to the formation of hydration products such as hydrated calcium silicate (C-S-H) gels and Friedel's salts (Fs). In addition, CDs are cost-effective and easy to functionalize. This makes CDs are emerging as an advantageous new type of nano-reinforcements for cement-based materials (CBMs). However, a comprehensive review of the CDs as a CBMs nano-reinforcements is still lacking. This work first summarizes the top-down and bottom-up synthesis of CDs, the four classifications of CDs based on physical and chemical structure, and several types of applications common to CDs (optical, electrical and biological). Besides, the advantages of CDs as a novel carbon-based nano-reinforcement (outstanding dispersibility and good cost-effectiveness) and corresponds to the physicochemical structural features of CDs, and then reviews the influence of CDs, at varying sizes and dosages, on the workability, hydration kinetics, hardened properties, and durability of CBMs, elucidating the underlying mechanisms. Furthermore, a comparative analysis highlights the superior advantages of CDs over graphene oxide (GO) and carbon nanotubes (CNTs) for cement modification. Finally, the future directions of CDs as a CBMs nano-reinforcement are further proposed.
Carbon dots (CDs), zero-dimensional carbon-based nanomaterials typically composed of sp2/sp3-hybridized carbon skeletons and abundant surface functional groups/polymer chains. CDs have a unique structure that is different from GOs and CNTs. Their nanoscale size (<10 nm) contributes to the formation of nucleation and pore-filling effects. Which contributes to the formation of hydration products such as hydrated calcium silicate (C-S-H) gels and Friedel's salts (Fs). In addition, CDs are cost-effective and easy to functionalize. This makes CDs are emerging as an advantageous new type of nano-reinforcements for cement-based materials (CBMs). However, a comprehensive review of the CDs as a CBMs nano-reinforcements is still lacking. This work first summarizes the top-down and bottom-up synthesis of CDs, the four classifications of CDs based on physical and chemical structure, and several types of applications common to CDs (optical, electrical and biological). Besides, the advantages of CDs as a novel carbon-based nano-reinforcement (outstanding dispersibility and good cost-effectiveness) and corresponds to the physicochemical structural features of CDs, and then reviews the influence of CDs, at varying sizes and dosages, on the workability, hydration kinetics, hardened properties, and durability of CBMs, elucidating the underlying mechanisms. Furthermore, a comparative analysis highlights the superior advantages of CDs over graphene oxide (GO) and carbon nanotubes (CNTs) for cement modification. Finally, the future directions of CDs as a CBMs nano-reinforcement are further proposed.
2027, 38(1): 112430
doi: 10.1016/j.cclet.2026.112430
Abstract:
The tumor microenvironment (TME) critically regulates tumor initiation, invasion, metastasis, and drug resistance, establishing its precise recognition and targeted intervention as a central objective in cancer theranostics. In recent years, activatable near-infrared (NIR) fluorescent theranostic agents have emerged as transformative tools for TME-specific imaging and therapy, capitalizing on their deep tissue penetration, high sensitivity, and minimal autofluorescence background. These theranostic agents can be selectively activated within specific tumor microenvironmental conditions (such as aberrant pH, elevated glutathione, reactive oxygen species, overexpressed enzymes, or other biomolecules) to concurrently release fluorescent signals and therapeutic cargos (e.g., drugs or photosensitizers), enabling synchronized monitoring and treatment of tumors. Despite significant technological advancements, a systematic analysis of the potential and practical applications of such probes in cancer theranostics remains lacking. Thus, this review comprehensively outlines recent progress in the design of such theranostic agents, emphasizing TME-responsive mechanisms, rational molecular engineering, and multifunctional applications in oncology.
The tumor microenvironment (TME) critically regulates tumor initiation, invasion, metastasis, and drug resistance, establishing its precise recognition and targeted intervention as a central objective in cancer theranostics. In recent years, activatable near-infrared (NIR) fluorescent theranostic agents have emerged as transformative tools for TME-specific imaging and therapy, capitalizing on their deep tissue penetration, high sensitivity, and minimal autofluorescence background. These theranostic agents can be selectively activated within specific tumor microenvironmental conditions (such as aberrant pH, elevated glutathione, reactive oxygen species, overexpressed enzymes, or other biomolecules) to concurrently release fluorescent signals and therapeutic cargos (e.g., drugs or photosensitizers), enabling synchronized monitoring and treatment of tumors. Despite significant technological advancements, a systematic analysis of the potential and practical applications of such probes in cancer theranostics remains lacking. Thus, this review comprehensively outlines recent progress in the design of such theranostic agents, emphasizing TME-responsive mechanisms, rational molecular engineering, and multifunctional applications in oncology.
2027, 38(1): 112818
doi: 10.1016/j.cclet.2026.112818
Abstract:
Axially chiral arene-alkenes represent typical atropisomeric scaffolds, which have emerged as versatile synthons for total synthesis or serve as the key structural motif in chiral catalysts and ligands. TM-catalyzed pathway to access such scaffold has been well developed and systematically summarized. Organocatalyzed strategies are recognized as a complementary avenue, promoting the rapid development of catalytic atroposelective arene-alkene synthesis. Herein, this review systematically summarizes the recent progress in organocatalyzed atroposelective synthesis of axially chiral arene-alkenes in complementary to the transition-metal (TM)-catalyzed pathway. Based on the reaction mechanism, these examples are categorized and discussed into four parts: (1) Asymmetric nucleophilic additions to the in-situ formed vinylidene ortho-quinone methides (VQMs) under the catalysis of chiral Brønsted bases or chiral phosphoric acids (CPAs); (2) Direct Michael addition of electron-deficient alkynes; (3) Organocatalytic functionalization of preformed arene-alkene scaffolds via DKR/KR or desymmetrization reactions; (4) Atroposelective O-functionalizations of α-aryl-substituted ketones. These advancements lay a solid foundation for further expanding the scope of axially chiral arene-alkenes in drug discovery, catalysis, and materials science, unlocking new possibilities for the development of novel chiral molecules with tailored properties.
Axially chiral arene-alkenes represent typical atropisomeric scaffolds, which have emerged as versatile synthons for total synthesis or serve as the key structural motif in chiral catalysts and ligands. TM-catalyzed pathway to access such scaffold has been well developed and systematically summarized. Organocatalyzed strategies are recognized as a complementary avenue, promoting the rapid development of catalytic atroposelective arene-alkene synthesis. Herein, this review systematically summarizes the recent progress in organocatalyzed atroposelective synthesis of axially chiral arene-alkenes in complementary to the transition-metal (TM)-catalyzed pathway. Based on the reaction mechanism, these examples are categorized and discussed into four parts: (1) Asymmetric nucleophilic additions to the in-situ formed vinylidene ortho-quinone methides (VQMs) under the catalysis of chiral Brønsted bases or chiral phosphoric acids (CPAs); (2) Direct Michael addition of electron-deficient alkynes; (3) Organocatalytic functionalization of preformed arene-alkene scaffolds via DKR/KR or desymmetrization reactions; (4) Atroposelective O-functionalizations of α-aryl-substituted ketones. These advancements lay a solid foundation for further expanding the scope of axially chiral arene-alkenes in drug discovery, catalysis, and materials science, unlocking new possibilities for the development of novel chiral molecules with tailored properties.
2027, 38(1): 112856
doi: 10.1016/j.cclet.2026.112856
Abstract:
Heavy metal complexes (HMCs) threaten ecosystems and human health due to their high stability, mobility, and resistance to conventional treatments. Although iron (Fe)-based materials show promise in environmental remediation, effectively disrupting persistent metal-ligand bonds for resource recovery remains challenging. Recent advances position Fe-based materials as versatile platforms for HMCs removal, capitalizing on their multivalent states, tunable interfaces, and synergistic mechanisms. However, complex aquatic matrices with coexisting ligands, competing ions, and variable pH complicate robust system design. This review comprehensively examines mechanisms, engineering strategies, and applications of Fe-based materials in HMCs decontamination. We systematically evaluate Fe-based catalysts, adsorbents, and reductants across diverse HMCs, focusing on oxidative cleavage, reductive dissociation, and Fe-driven displacement. Advanced engineering approaches, such as atomic-level modification, heterometallic synergy, confinement architectures, and field-assisted intensification, are assessed to address passivation and inefficient electron transfer. Mechanistic insights from advanced characterization and computational studies bridge atomic-scale interactions with macroscopic performance. Industrial cases demonstrate the scalability and circular potential of Fe-assisted processes, while future research should prioritize sustainable material design, resilience in complex waters, and life-cycle aligned systems. This review provides key insights and practical strategies to advance Fe-based technologies toward sustainable HMCs management and resource circularity.
Heavy metal complexes (HMCs) threaten ecosystems and human health due to their high stability, mobility, and resistance to conventional treatments. Although iron (Fe)-based materials show promise in environmental remediation, effectively disrupting persistent metal-ligand bonds for resource recovery remains challenging. Recent advances position Fe-based materials as versatile platforms for HMCs removal, capitalizing on their multivalent states, tunable interfaces, and synergistic mechanisms. However, complex aquatic matrices with coexisting ligands, competing ions, and variable pH complicate robust system design. This review comprehensively examines mechanisms, engineering strategies, and applications of Fe-based materials in HMCs decontamination. We systematically evaluate Fe-based catalysts, adsorbents, and reductants across diverse HMCs, focusing on oxidative cleavage, reductive dissociation, and Fe-driven displacement. Advanced engineering approaches, such as atomic-level modification, heterometallic synergy, confinement architectures, and field-assisted intensification, are assessed to address passivation and inefficient electron transfer. Mechanistic insights from advanced characterization and computational studies bridge atomic-scale interactions with macroscopic performance. Industrial cases demonstrate the scalability and circular potential of Fe-assisted processes, while future research should prioritize sustainable material design, resilience in complex waters, and life-cycle aligned systems. This review provides key insights and practical strategies to advance Fe-based technologies toward sustainable HMCs management and resource circularity.
2027, 38(1): 112885
doi: 10.1016/j.cclet.2026.112885
Abstract:
The overuse of antibiotics and their resistance to natural degradation have contributed to a continuous increase in the accumulation of this substance in the environment. How to make it degrade efficiently is the goal that many researchers are striving for. This review focuses on piezocatalysis, a technology that uses the piezoelectric effect to degrade antibiotics. It compares the differences between this technology and common methods, and discusses how combining the piezoelectric effect with advanced oxidation processes and modifying piezoelectric materials can effectively improve the degradation efficiency of antibiotics, respectively. In addition, the review also introduces the degradation pathways of several common types of antibiotics and analyzes the impact of changes in environmental conditions on degradation efficiency. Finally, through the piezoelectric effect, antibiotics gradually convert into intermediate products until they are degraded into small molecules, with their toxicity continuously decreasing, ensuring a safe transformation. This demonstrates that the piezoelectric effect has broad application prospects in antibiotic degradation and serves as a valuable reference for other scientists to further study how to efficiently degrade antibiotics in the environment using the piezoelectric effect.
The overuse of antibiotics and their resistance to natural degradation have contributed to a continuous increase in the accumulation of this substance in the environment. How to make it degrade efficiently is the goal that many researchers are striving for. This review focuses on piezocatalysis, a technology that uses the piezoelectric effect to degrade antibiotics. It compares the differences between this technology and common methods, and discusses how combining the piezoelectric effect with advanced oxidation processes and modifying piezoelectric materials can effectively improve the degradation efficiency of antibiotics, respectively. In addition, the review also introduces the degradation pathways of several common types of antibiotics and analyzes the impact of changes in environmental conditions on degradation efficiency. Finally, through the piezoelectric effect, antibiotics gradually convert into intermediate products until they are degraded into small molecules, with their toxicity continuously decreasing, ensuring a safe transformation. This demonstrates that the piezoelectric effect has broad application prospects in antibiotic degradation and serves as a valuable reference for other scientists to further study how to efficiently degrade antibiotics in the environment using the piezoelectric effect.
2027, 38(1): 113069
doi: 10.1016/j.cclet.2026.113069
Abstract:
Biomaterials are emerging as material-intrinsic epigenetic regulators capable of coordinating immune cell reprogramming through their physical and structural properties. Transduction of cytoskeletal tension into spatiotemporal repositioning of chromatin-modifying enzymes at discrete genomic loci occurs via nanotopographical signaling, mechanical compliance and surface chirality transduction. Topography-based biasing of histone demethylase nuclear trafficking is demonstrated by ordered titanium nanotube array, whereas stereoselective control is demonstrated by nanofibrillar-based enantiomeric geometries over epitranscriptomic/chromatin-associated regulatory circuits. Mechanotransduction-specific nuclear reorganization eliciting substrate stiffness controls subnuclear divisions of acetyltransferases and deacetylases. These physical determinants encode context-specific, stable chromatin states in the innate and adaptive immune lineages. These material-coded epigenetic conditions result in sustained reprogramming of phenotypes and immunological memory including trained-immunity phenotypes in particular circumstances. Such mechanogenomic systems present therapeutic strategies of inducing antigen-specific tolerance in autoimmune inflammation, re-energizing exhausted tumor-infiltrating lymphocytes, and promoting regenerative wound repair through checkpoint innate immune regulation. Through this review, we establish design principles integrating nanofabrication, tunable mechanics, and chromatin profiling. This framework will allow epigenome-directing biomaterials to use the physical forces to achieve long-lasting immune reprogramming and precision immunotherapies without having to edit the genome.
Biomaterials are emerging as material-intrinsic epigenetic regulators capable of coordinating immune cell reprogramming through their physical and structural properties. Transduction of cytoskeletal tension into spatiotemporal repositioning of chromatin-modifying enzymes at discrete genomic loci occurs via nanotopographical signaling, mechanical compliance and surface chirality transduction. Topography-based biasing of histone demethylase nuclear trafficking is demonstrated by ordered titanium nanotube array, whereas stereoselective control is demonstrated by nanofibrillar-based enantiomeric geometries over epitranscriptomic/chromatin-associated regulatory circuits. Mechanotransduction-specific nuclear reorganization eliciting substrate stiffness controls subnuclear divisions of acetyltransferases and deacetylases. These physical determinants encode context-specific, stable chromatin states in the innate and adaptive immune lineages. These material-coded epigenetic conditions result in sustained reprogramming of phenotypes and immunological memory including trained-immunity phenotypes in particular circumstances. Such mechanogenomic systems present therapeutic strategies of inducing antigen-specific tolerance in autoimmune inflammation, re-energizing exhausted tumor-infiltrating lymphocytes, and promoting regenerative wound repair through checkpoint innate immune regulation. Through this review, we establish design principles integrating nanofabrication, tunable mechanics, and chromatin profiling. This framework will allow epigenome-directing biomaterials to use the physical forces to achieve long-lasting immune reprogramming and precision immunotherapies without having to edit the genome.
Nanomedicine-enabled reprogramming of macrophage trained immunity to modulate cancer stem cells fate
2027, 38(1): 113105
doi: 10.1016/j.cclet.2026.113105
Abstract:
Tumor-associated macrophages (TAMs) are key regulators of tumor progression and treatment resistance. Among their functions, efferocytosis, the clearance of apoptotic cells, often suppresses antitumor immunity and can support cancer stem cell (CSC) survival in tumors. Trained immunity further shapes this process by reprogramming macrophages through epigenetic and metabolic mechanisms, thereby influencing efferocytic activity and CSC-related phenotypes. These findings identify the trained immunity-macrophage efferocytosis-CSC axis as a potential target for CSC-directed therapy. However, clinical translation of trained immunity inducers is limited by poor targeting, pharmacokinetic instability, insufficient accumulation, and systemic toxicity. Nanomedicine offers a potential solution by improving cargo stability, tissue retention, controlled release, and macrophage-targeted delivery. In this review, we summarize the molecular links between trained immunity, macrophage efferocytosis, and CSC fate, discuss nanomaterial-based strategies to modulate this axis, and outline the key challenges and future opportunities for developing next-generation antitumor nanomedicines. Unlike previous reviews that discuss these fields separately, this review integrates trained immunity, macrophage efferocytosis and CSC biology into a unified axis, and proposes nanomedicine-enabled TAM reprogramming as a strategy to redirect efferocytic outcomes and suppress CSC-supportive tumor niches.
Tumor-associated macrophages (TAMs) are key regulators of tumor progression and treatment resistance. Among their functions, efferocytosis, the clearance of apoptotic cells, often suppresses antitumor immunity and can support cancer stem cell (CSC) survival in tumors. Trained immunity further shapes this process by reprogramming macrophages through epigenetic and metabolic mechanisms, thereby influencing efferocytic activity and CSC-related phenotypes. These findings identify the trained immunity-macrophage efferocytosis-CSC axis as a potential target for CSC-directed therapy. However, clinical translation of trained immunity inducers is limited by poor targeting, pharmacokinetic instability, insufficient accumulation, and systemic toxicity. Nanomedicine offers a potential solution by improving cargo stability, tissue retention, controlled release, and macrophage-targeted delivery. In this review, we summarize the molecular links between trained immunity, macrophage efferocytosis, and CSC fate, discuss nanomaterial-based strategies to modulate this axis, and outline the key challenges and future opportunities for developing next-generation antitumor nanomedicines. Unlike previous reviews that discuss these fields separately, this review integrates trained immunity, macrophage efferocytosis and CSC biology into a unified axis, and proposes nanomedicine-enabled TAM reprogramming as a strategy to redirect efferocytic outcomes and suppress CSC-supportive tumor niches.
2027, 38(1): 113290
doi: 10.1016/j.cclet.2026.113290
Abstract:
Liposomes are widely used as drug delivery systems due to their biocompatibility, tunable physicochemical properties, and ease of surface functionalization. Fluorescence imaging offers high sensitivity, real-time monitoring, and spatial resolution, making it an essential tool for tracking the in vivo distribution, migration, and biological effects of nanocarriers. By combining them, the fluorescent liposomal nanoplatforms with multiple functions, including efficient drug loading, real-time visual monitoring, and active targeted delivery, are widely developed through the covalent conjugation of fluorophores to the hydrophilic headgroups or hydrophobic tails of liposomes. In this review, we summarize the recent progress on molecular design strategies for covalently modified fluorescent liposomes (FP). Based on the fluorophore attachment site, these FP are mainly categorized into two types including hydrophilic headgroup and hydrophobic tail modifications. We highlight their optical performance and self-assembled property. And we focus on discussing their functional applications in areas such as drug delivery, phototherapy and so on. Furthermore, regarding the application in this field, we also provide an outlook as well as the direction for future development.
Liposomes are widely used as drug delivery systems due to their biocompatibility, tunable physicochemical properties, and ease of surface functionalization. Fluorescence imaging offers high sensitivity, real-time monitoring, and spatial resolution, making it an essential tool for tracking the in vivo distribution, migration, and biological effects of nanocarriers. By combining them, the fluorescent liposomal nanoplatforms with multiple functions, including efficient drug loading, real-time visual monitoring, and active targeted delivery, are widely developed through the covalent conjugation of fluorophores to the hydrophilic headgroups or hydrophobic tails of liposomes. In this review, we summarize the recent progress on molecular design strategies for covalently modified fluorescent liposomes (FP). Based on the fluorophore attachment site, these FP are mainly categorized into two types including hydrophilic headgroup and hydrophobic tail modifications. We highlight their optical performance and self-assembled property. And we focus on discussing their functional applications in areas such as drug delivery, phototherapy and so on. Furthermore, regarding the application in this field, we also provide an outlook as well as the direction for future development.
2027, 38(1): 111996
doi: 10.1016/j.cclet.2025.111996
Abstract:
High-nickel layered oxides are promising cathodes for high-energy-density lithium-ion batteries (LIBs). However, severe interfacial side reactions during charge-discharge cycles lead to micro-crack formation, raising safety concerns and degrading cycle life. Herein, we constructed Li[Ni0.95Co0.025Mn0.025]O2 (NCM) cathode materials featuring tungsten (W) doping and Li3PO4 coating (W-NCM@LP). The W doping induces the formation of unique rod-like primary particles, which effectively suppress the propagation of microcracks. Simultaneously, the Li3PO4 coating not only enhances Li+ diffusion kinetics but also mitigates issues associated with residual lithium compounds on the surface. Through the synergistic combination of microstructural engineering and surface coating strategies, the W-NCM@LP cathode delivers an initial capacity of 237.7 mAh/g at 0.1 C and maintains capacity retention of 90.2% after 100 cycles at 0.5 C. The present work provides fundamental insights for the development and performance optimization of high nickel ternary cathode materials.
High-nickel layered oxides are promising cathodes for high-energy-density lithium-ion batteries (LIBs). However, severe interfacial side reactions during charge-discharge cycles lead to micro-crack formation, raising safety concerns and degrading cycle life. Herein, we constructed Li[Ni0.95Co0.025Mn0.025]O2 (NCM) cathode materials featuring tungsten (W) doping and Li3PO4 coating (W-NCM@LP). The W doping induces the formation of unique rod-like primary particles, which effectively suppress the propagation of microcracks. Simultaneously, the Li3PO4 coating not only enhances Li+ diffusion kinetics but also mitigates issues associated with residual lithium compounds on the surface. Through the synergistic combination of microstructural engineering and surface coating strategies, the W-NCM@LP cathode delivers an initial capacity of 237.7 mAh/g at 0.1 C and maintains capacity retention of 90.2% after 100 cycles at 0.5 C. The present work provides fundamental insights for the development and performance optimization of high nickel ternary cathode materials.
2027, 38(1): 112023
doi: 10.1016/j.cclet.2025.112023
Abstract:
Polymer dielectrics exhibit significant deterioration in energy storage performance under high-temperature applications such as high voltage transmission and oil exploration. Developing polymer dielectrics that exhibit both high energy storage density (Ue) and high breakdown strength (Eb) under high-temperature remains a significant challenge. Herein, two-dimensional TiO2/ZnO heterostructures (TZ) with stable chemical structure and high dielectric constant were synthesized. Modified TZ were then incorporated with polyetherimide (PEI) to form PEI-based composite dielectric (PEI/TZ), featuring a defect-free interface structure with strong interfacial bonding interactions. Compared to pure PEI, the PEI/TZ dielectric with a novel interfacial structure exhibits a significantly enhanced Eb and Ue. The PEI/TZ composite achieves an Eb of 679.7 MV/m and Ue of 7.02 J/cm3 with η exceeding 90%, representing a 57% improvement in Ue over pure PEI (4.44 J/cm3). More importantly, at 200 °C, PEI/TZ exhibits a significantly enhanced Eb of 575.5 MV/m and Ue reaches 4.46 J/cm3 with η above 90%, surpassing most polymer-based dielectrics reported in the literature. Both experimental and theoretical simulations demonstrated that 2D heterostructures and the strong bonding interactions at interface effectively suppressed carrier transport under high electric fields, enhancing the dielectric energy storage properties. This study provides a new strategy for the development of polymer dielectrics with superior energy storage capabilities at high temperature.
Polymer dielectrics exhibit significant deterioration in energy storage performance under high-temperature applications such as high voltage transmission and oil exploration. Developing polymer dielectrics that exhibit both high energy storage density (Ue) and high breakdown strength (Eb) under high-temperature remains a significant challenge. Herein, two-dimensional TiO2/ZnO heterostructures (TZ) with stable chemical structure and high dielectric constant were synthesized. Modified TZ were then incorporated with polyetherimide (PEI) to form PEI-based composite dielectric (PEI/TZ), featuring a defect-free interface structure with strong interfacial bonding interactions. Compared to pure PEI, the PEI/TZ dielectric with a novel interfacial structure exhibits a significantly enhanced Eb and Ue. The PEI/TZ composite achieves an Eb of 679.7 MV/m and Ue of 7.02 J/cm3 with η exceeding 90%, representing a 57% improvement in Ue over pure PEI (4.44 J/cm3). More importantly, at 200 °C, PEI/TZ exhibits a significantly enhanced Eb of 575.5 MV/m and Ue reaches 4.46 J/cm3 with η above 90%, surpassing most polymer-based dielectrics reported in the literature. Both experimental and theoretical simulations demonstrated that 2D heterostructures and the strong bonding interactions at interface effectively suppressed carrier transport under high electric fields, enhancing the dielectric energy storage properties. This study provides a new strategy for the development of polymer dielectrics with superior energy storage capabilities at high temperature.
2027, 38(1): 112043
doi: 10.1016/j.cclet.2025.112043
Abstract:
Poly(vinylidene fluoride) (PVDF)-based composite polymer electrolytes (CPEs) show great potential for solid-state batteries, but their performance are compromised by their inherent porous architecture. This structural deterioration, resulting from the stacking of oversized spherulites during phase separation, severely hinders long-range ion transport and uniform Li ion flux. In this study, we propose a novel strategy utilizing fluorine-rich silica-based nano-compatibilizer (FSNC) integrated rigid silica skeletons with fluorine-rich functional groups to achieve uniform PVDF-based CPEs (CPE-FSNC). Inspired by neuronal structures, the FSNC design enables rapid ion transport through coordinated pathways, with fluorine-rich groups acting as synaptic channels to ensure continuous conduction within the polymer matrix. The resulting CPE-FSNC exhibits a dense morphology, enhanced ion transport, stabilized interfaces, and superior mechanical strength. CPE-FSNC achieves high ionic conductivity of 2.7 × 10–4 S/cm at room temperature, Li+ transference number of 0.60, and the LiCPE-FSNCLiFePO4 cell maintains stable cycling over 500 cycles with 90% capacity retention.
Poly(vinylidene fluoride) (PVDF)-based composite polymer electrolytes (CPEs) show great potential for solid-state batteries, but their performance are compromised by their inherent porous architecture. This structural deterioration, resulting from the stacking of oversized spherulites during phase separation, severely hinders long-range ion transport and uniform Li ion flux. In this study, we propose a novel strategy utilizing fluorine-rich silica-based nano-compatibilizer (FSNC) integrated rigid silica skeletons with fluorine-rich functional groups to achieve uniform PVDF-based CPEs (CPE-FSNC). Inspired by neuronal structures, the FSNC design enables rapid ion transport through coordinated pathways, with fluorine-rich groups acting as synaptic channels to ensure continuous conduction within the polymer matrix. The resulting CPE-FSNC exhibits a dense morphology, enhanced ion transport, stabilized interfaces, and superior mechanical strength. CPE-FSNC achieves high ionic conductivity of 2.7 × 10–4 S/cm at room temperature, Li+ transference number of 0.60, and the LiCPE-FSNCLiFePO4 cell maintains stable cycling over 500 cycles with 90% capacity retention.
2027, 38(1): 112048
doi: 10.1016/j.cclet.2025.112048
Abstract:
Poly(ethylene oxide) (PEO)-based electrolytes are critical for developing high safety and energy density of solid-state batteries, yet their practical application has been limited by low ionic conductivity and inadequate high-voltage stability. To address these challenges, we introduce an active sodium-based filler, Na5YSi4O12 (NYSO), into the PEO(Li+) electrolyte to fabricate a hybrid solid electrolyte (HSE). This strategy leverages the intrinsic dynamic disparity between Na+ in NYSO and Li+ in PEO to create a highly active ion-exchange interlayer at the organic-inorganic interface. Through advanced solid-state NMR combined with Raman spectroscopy, we demonstrate that this interphase markedly enhances ion transport dynamics, as evidenced by a low Li+ transport barrier of 0.08 eV, an increased amorphous fraction of 75.3%, and an elevated free-ion ratio of 14.6%. Consequently, the HSE can operate effectively at 50 ℃, delivering an ionic conductivity of 3.92 × 10–4 S/cm and a Li+ transference number of 0.68. NCM811Li full cells retain 80.1% of their initial capacity after 200 cycles at 0.3 C. This design strategy offers a viable route to tailoring the local interfacial environment between inorganic and organic components in HSEs.
Poly(ethylene oxide) (PEO)-based electrolytes are critical for developing high safety and energy density of solid-state batteries, yet their practical application has been limited by low ionic conductivity and inadequate high-voltage stability. To address these challenges, we introduce an active sodium-based filler, Na5YSi4O12 (NYSO), into the PEO(Li+) electrolyte to fabricate a hybrid solid electrolyte (HSE). This strategy leverages the intrinsic dynamic disparity between Na+ in NYSO and Li+ in PEO to create a highly active ion-exchange interlayer at the organic-inorganic interface. Through advanced solid-state NMR combined with Raman spectroscopy, we demonstrate that this interphase markedly enhances ion transport dynamics, as evidenced by a low Li+ transport barrier of 0.08 eV, an increased amorphous fraction of 75.3%, and an elevated free-ion ratio of 14.6%. Consequently, the HSE can operate effectively at 50 ℃, delivering an ionic conductivity of 3.92 × 10–4 S/cm and a Li+ transference number of 0.68. NCM811Li full cells retain 80.1% of their initial capacity after 200 cycles at 0.3 C. This design strategy offers a viable route to tailoring the local interfacial environment between inorganic and organic components in HSEs.
2027, 38(1): 112088
doi: 10.1016/j.cclet.2025.112088
Abstract:
Schiff base polymers (SPs) are a class of materials containing imine structural unit that have shown great commercial value in many fields due to the outstanding thermal stability, mechanical property as well as the widely adjustable monomer species-resulted rich functionality. They are traditionally prepared by the polycondensation between amines and aldehydes or ketones in the melt or in solution needing suitable solvents and catalysts. Here we report a simple, low-temperature, catalyst-free, and universal strategy called solvent recrystallization (SR) route for rapid synthesis of SPs, by which the reaction rate and terminal group can be finely tuned. The catalyst-free rapid reaction mechanism is revealed to be the freeze-concentration effect at the grain boundaries between the recrystallized solvent crystals. Our strategy is applicable for molecular structure systems of various-dimension reaction-active sites and also for the heteroatom-containing systems of renown in optoelectronic applications.
Schiff base polymers (SPs) are a class of materials containing imine structural unit that have shown great commercial value in many fields due to the outstanding thermal stability, mechanical property as well as the widely adjustable monomer species-resulted rich functionality. They are traditionally prepared by the polycondensation between amines and aldehydes or ketones in the melt or in solution needing suitable solvents and catalysts. Here we report a simple, low-temperature, catalyst-free, and universal strategy called solvent recrystallization (SR) route for rapid synthesis of SPs, by which the reaction rate and terminal group can be finely tuned. The catalyst-free rapid reaction mechanism is revealed to be the freeze-concentration effect at the grain boundaries between the recrystallized solvent crystals. Our strategy is applicable for molecular structure systems of various-dimension reaction-active sites and also for the heteroatom-containing systems of renown in optoelectronic applications.
2027, 38(1): 112089
doi: 10.1016/j.cclet.2025.112089
Abstract:
Composite solid electrolytes (CSEs), leveraging the combined advantages of inorganic and polymer electrolytes, exhibit great potential for solid-state lithium metal batteries (SSLMBs). However, conventional symmetric ceramic/polymer CSEs exhibit limitations in suppressing the growth of lithium dendrites and fail to meet the conflicting demands at the anode and cathode. Herein, an asymmetric poly(vinylidene fluoride) (PVDF)-BiFeO3 (BFO) CSE was successfully prepared, in which the BFO-rich side featuring a dense thin layer, in direct contact with the anode, facilitates lithium salt dissociation and establishes stable ion transport channels, ensuring uniform and fast Li+ transport. Simultaneously, the ferroelectric BFO drives in situ formation of lithiophilic Li3Bi on the Li anode, enabling uniform Li plating and thus dendrite suppression. Moreover, the PVDF-rich region at the cathode side ensures stable interfacial contact with the cathode active material. Therefore, Li/Li symmetric cells assembled with the PVDF-BFO electrolyte exhibit excellent cycling stability, exceeding 1500 h at 0.1 mA/cm2 and 0.1 mAh/cm2. The Li/LiNi0.8Co0.1Mn0.1O2 full cells deliver a high capacity retention of 86.7% after 600 cycles at 1 C. This work paves the way for designing novel CSEs with simultaneously improved ionic conductivities, homogenized Li-ion flux and enhanced interfacial compatibility for SSLMBs.
Composite solid electrolytes (CSEs), leveraging the combined advantages of inorganic and polymer electrolytes, exhibit great potential for solid-state lithium metal batteries (SSLMBs). However, conventional symmetric ceramic/polymer CSEs exhibit limitations in suppressing the growth of lithium dendrites and fail to meet the conflicting demands at the anode and cathode. Herein, an asymmetric poly(vinylidene fluoride) (PVDF)-BiFeO3 (BFO) CSE was successfully prepared, in which the BFO-rich side featuring a dense thin layer, in direct contact with the anode, facilitates lithium salt dissociation and establishes stable ion transport channels, ensuring uniform and fast Li+ transport. Simultaneously, the ferroelectric BFO drives in situ formation of lithiophilic Li3Bi on the Li anode, enabling uniform Li plating and thus dendrite suppression. Moreover, the PVDF-rich region at the cathode side ensures stable interfacial contact with the cathode active material. Therefore, Li/Li symmetric cells assembled with the PVDF-BFO electrolyte exhibit excellent cycling stability, exceeding 1500 h at 0.1 mA/cm2 and 0.1 mAh/cm2. The Li/LiNi0.8Co0.1Mn0.1O2 full cells deliver a high capacity retention of 86.7% after 600 cycles at 1 C. This work paves the way for designing novel CSEs with simultaneously improved ionic conductivities, homogenized Li-ion flux and enhanced interfacial compatibility for SSLMBs.
2027, 38(1): 112117
doi: 10.1016/j.cclet.2025.112117
Abstract:
Noble metal aerogels (NMAs), derived from preformed colloidal nanoparticles, are an emerging class of porous materials with significant potential for electrocatalysis. However, the controllable synthesis and function-oriented design of NMAs, and their structure-activity relationship in electrocatalysis remain great challenges. Here, we report a straightforward size engineering strategy to synthesize Au aerogels via a combined pH-dopamine induced gelation of Au nanoparticles with different sizes. The resultant Au aerogels, with tunable ligament sizes, exhibit exceptional electrocatalytic performance in the conversion of CO2. Interestingly, enlarging the ligament size of Au aerogels enhances their electrocatalytic activity, leading to a remarkable electrocatalytic reduction of CO2 to CO (65.7 mA/cm2 at -0.64 V vs. RHE) with a Faradaic efficiency of 96%. Both in situ electrochemical attenuated total reflectance-Fourier transform infrared spectroscopy and molecular dynamics simulations reveal that the electrocatalytic enhancement effect on Au aerogels can be attributed to the increased CO2 attachment to larger ligament size. This work not only achieves the controllable size engineering of metal aerogels but also offers insight into their structure-activity relationship in CO2 reduction, which paves the way for a rational design of NMAs for electrocatalysis.
Noble metal aerogels (NMAs), derived from preformed colloidal nanoparticles, are an emerging class of porous materials with significant potential for electrocatalysis. However, the controllable synthesis and function-oriented design of NMAs, and their structure-activity relationship in electrocatalysis remain great challenges. Here, we report a straightforward size engineering strategy to synthesize Au aerogels via a combined pH-dopamine induced gelation of Au nanoparticles with different sizes. The resultant Au aerogels, with tunable ligament sizes, exhibit exceptional electrocatalytic performance in the conversion of CO2. Interestingly, enlarging the ligament size of Au aerogels enhances their electrocatalytic activity, leading to a remarkable electrocatalytic reduction of CO2 to CO (65.7 mA/cm2 at -0.64 V vs. RHE) with a Faradaic efficiency of 96%. Both in situ electrochemical attenuated total reflectance-Fourier transform infrared spectroscopy and molecular dynamics simulations reveal that the electrocatalytic enhancement effect on Au aerogels can be attributed to the increased CO2 attachment to larger ligament size. This work not only achieves the controllable size engineering of metal aerogels but also offers insight into their structure-activity relationship in CO2 reduction, which paves the way for a rational design of NMAs for electrocatalysis.
2027, 38(1): 112120
doi: 10.1016/j.cclet.2025.112120
Abstract:
Asphalt-derived porous carbon exhibits high specific surface area, hierarchical porosity, and desirable electrical conductivity, rendering it a promising electrode material for supercapacitors. Herein, we report a green, ultrafast synthesis of asphalt-based porous carbon by integrating molten-salt activation with Joule heating. This approach achieves carbonization at 850 ℃ for 8 s with a heating rate of 567 K/s. The binary KCl/K2CO3 molten salts effectively exfoliate and activate asphalt, yielding carbon sheets with a high pore volume (0.61 cm3/g) and a specific surface area of 1017.5 m2/g. The material delivers a high specific capacitance of 362.9 F/g in 6 mol/L KOH electrolyte, outperforming porous carbon synthesized via conventional molten-salt methods (274.4 F/g). When configured into a symmetric supercapacitor using 17.0 mol/L NaClO4 electrolyte, the device achieves an energy density of 26.7 Wh/kg at a power density of 286.7 W/kg. This work underscores the efficacy of molten-salt-assisted Joule heating for the rapid transformation of asphalt into high-value carbon materials for energy storage materials.
Asphalt-derived porous carbon exhibits high specific surface area, hierarchical porosity, and desirable electrical conductivity, rendering it a promising electrode material for supercapacitors. Herein, we report a green, ultrafast synthesis of asphalt-based porous carbon by integrating molten-salt activation with Joule heating. This approach achieves carbonization at 850 ℃ for 8 s with a heating rate of 567 K/s. The binary KCl/K2CO3 molten salts effectively exfoliate and activate asphalt, yielding carbon sheets with a high pore volume (0.61 cm3/g) and a specific surface area of 1017.5 m2/g. The material delivers a high specific capacitance of 362.9 F/g in 6 mol/L KOH electrolyte, outperforming porous carbon synthesized via conventional molten-salt methods (274.4 F/g). When configured into a symmetric supercapacitor using 17.0 mol/L NaClO4 electrolyte, the device achieves an energy density of 26.7 Wh/kg at a power density of 286.7 W/kg. This work underscores the efficacy of molten-salt-assisted Joule heating for the rapid transformation of asphalt into high-value carbon materials for energy storage materials.
2027, 38(1): 112144
doi: 10.1016/j.cclet.2025.112144
Abstract:
In the field of electrocatalysis, Sb doping was first exploited for formic acid oxidation, thereby laying the groundwork for Sb-based catalytic materials; meanwhile, previous studies have demonstrated that Br- ions can effectively tailor the morphology of metals such as Au and Ag, offering a transferable strategy for the shape optimization of other metallic nanostructures. However, the application of PtSb alloys in the electro-oxidation of polyols remains scarce, and the precise morphological control of PtSb nanomaterials to boost catalytic performance is still an urgent challenge. Inspired by the documented role of Br-, this work successfully synthesized PtSb nanomaterials and achieved a directed transformation from nanoparticles to nanowires through Br--mediated modulation. Systematic characterization and electrochemical evaluation revealed that the resultant PtSb nanowires exhibited exceptional activity in ethylene-glycol and glycerol oxidation, delivering mass activities of 10,600 and 6656 mA/mgPt, respectively. After 4000 s of continuous electrochemical testing, the nanowires retained stable residual activities of 1358 and 615 mA/mgPt in the two electrolytes, significantly surpassing those of commercial Pt/C. By minimizing noble-metal usage while simultaneously enhancing both activity and stability, this study provides new insight for the development of high-performance fuel-cell catalysts.
In the field of electrocatalysis, Sb doping was first exploited for formic acid oxidation, thereby laying the groundwork for Sb-based catalytic materials; meanwhile, previous studies have demonstrated that Br- ions can effectively tailor the morphology of metals such as Au and Ag, offering a transferable strategy for the shape optimization of other metallic nanostructures. However, the application of PtSb alloys in the electro-oxidation of polyols remains scarce, and the precise morphological control of PtSb nanomaterials to boost catalytic performance is still an urgent challenge. Inspired by the documented role of Br-, this work successfully synthesized PtSb nanomaterials and achieved a directed transformation from nanoparticles to nanowires through Br--mediated modulation. Systematic characterization and electrochemical evaluation revealed that the resultant PtSb nanowires exhibited exceptional activity in ethylene-glycol and glycerol oxidation, delivering mass activities of 10,600 and 6656 mA/mgPt, respectively. After 4000 s of continuous electrochemical testing, the nanowires retained stable residual activities of 1358 and 615 mA/mgPt in the two electrolytes, significantly surpassing those of commercial Pt/C. By minimizing noble-metal usage while simultaneously enhancing both activity and stability, this study provides new insight for the development of high-performance fuel-cell catalysts.
2027, 38(1): 112149
doi: 10.1016/j.cclet.2025.112149
Abstract:
The modulation of energy transfer pathways enhances the optical diversity of lanthanide metal-organic frameworks (Ln-MOFs), demonstrating significant potential in applications such as multiple information encryption and smart photoresponsive antibiotic detection. In this study, a series of different proportions bimetallic Ln-MOFs, HNU-103-EuxTb1-x, were designed and synthesized. By adjusting the energy distribution to control the emission color output, multiple fluorescence emissions from red to blue were successfully achieved. Taking advantage of the obvious reversible color-changing mechanochromic luminescence (MCL) characteristics of the bimetallic HNU-103-Eu0.1Tb0.9, the fluorescence color changes from vivid pink to blue due to the fracture and recombination of COO-Eu, and then reversibly recovers through recrystallization and fumigation. Based on this phenomenon, two multiple information encryption schemes are developed with the functions of preventing information leakage, erasability, and reusability. Additionally, the HNU-103-Eu0.9Tb0.1 has optical sensing capabilities with high sensitivity and color contrast, and can be used to detect two structurally similar quinolone antibiotics ciprofloxacin (CIP) and ofloxacin (OFX) through distinct colorimetric responses. Smartphone-based visual detection platform was successfully established for on-site quantitative analysis. This work provides a promising strategy for the development of multifunctional smart responsive luminescent materials.
The modulation of energy transfer pathways enhances the optical diversity of lanthanide metal-organic frameworks (Ln-MOFs), demonstrating significant potential in applications such as multiple information encryption and smart photoresponsive antibiotic detection. In this study, a series of different proportions bimetallic Ln-MOFs, HNU-103-EuxTb1-x, were designed and synthesized. By adjusting the energy distribution to control the emission color output, multiple fluorescence emissions from red to blue were successfully achieved. Taking advantage of the obvious reversible color-changing mechanochromic luminescence (MCL) characteristics of the bimetallic HNU-103-Eu0.1Tb0.9, the fluorescence color changes from vivid pink to blue due to the fracture and recombination of COO-Eu, and then reversibly recovers through recrystallization and fumigation. Based on this phenomenon, two multiple information encryption schemes are developed with the functions of preventing information leakage, erasability, and reusability. Additionally, the HNU-103-Eu0.9Tb0.1 has optical sensing capabilities with high sensitivity and color contrast, and can be used to detect two structurally similar quinolone antibiotics ciprofloxacin (CIP) and ofloxacin (OFX) through distinct colorimetric responses. Smartphone-based visual detection platform was successfully established for on-site quantitative analysis. This work provides a promising strategy for the development of multifunctional smart responsive luminescent materials.
2027, 38(1): 112166
doi: 10.1016/j.cclet.2025.112166
Abstract:
Reconciling fast kinetics with high mass loading in zinc-ion hybrid capacitors requires space-efficient ion pathways and robust ion accommodation. This study proposes a space-constrained coupling strategy by using the natural pores of wood as a template, in-situ polymerization of biomass resin at low temperature with excess KOH creates a three-dimensional interconnected hierarchical pore network. The pore structure is highly matched to the carrier size, optimizing ion diffusion and overcoming the kinetic bottleneck of the hysteresis reaction in high-load thick carbon electrodes. The wood-based resin composite electrode delivers an impressive areal capacity of 4.9 mAh/cm2 at a high load of 32.4 mg/cm2, with excellent cycle stability (90% after 20,000 cycles). Through Distribution of Relaxation Times and a series of in-situ and ex-situ characterizations and electrochemical kinetic analysis, the three-stage synergy of “pore transport-interface adsorption-charge transfer” is revealed. This green strategy provides a solution to the “dynamics-load” trade-off and lays a theoretical foundation for advancing high energy density zinc-ion hybrid capacitors.
Reconciling fast kinetics with high mass loading in zinc-ion hybrid capacitors requires space-efficient ion pathways and robust ion accommodation. This study proposes a space-constrained coupling strategy by using the natural pores of wood as a template, in-situ polymerization of biomass resin at low temperature with excess KOH creates a three-dimensional interconnected hierarchical pore network. The pore structure is highly matched to the carrier size, optimizing ion diffusion and overcoming the kinetic bottleneck of the hysteresis reaction in high-load thick carbon electrodes. The wood-based resin composite electrode delivers an impressive areal capacity of 4.9 mAh/cm2 at a high load of 32.4 mg/cm2, with excellent cycle stability (90% after 20,000 cycles). Through Distribution of Relaxation Times and a series of in-situ and ex-situ characterizations and electrochemical kinetic analysis, the three-stage synergy of “pore transport-interface adsorption-charge transfer” is revealed. This green strategy provides a solution to the “dynamics-load” trade-off and lays a theoretical foundation for advancing high energy density zinc-ion hybrid capacitors.
2027, 38(1): 112167
doi: 10.1016/j.cclet.2025.112167
Abstract:
Molecules with practical applications usually need to possess more than one outstanding property. However, in AI-driven functional molecule research, machine learning models can often only predict a single property in a single database due to the minimal overlap in molecular structures and properties between different databases. Herein, we propose spectral descriptor as a universal bridge across databases, effectively projecting molecular data from diverse domains into a shared physicochemical space for learning. To validate this concept, we selected three distinct datasets containing properties like HOMO-LUMO gap, singlet–triplet energy gap, and molecular surface electrostatic potential, then employed spectral descriptors to evaluate both their in-dataset learning performance and cross-dataset transferability. In all cases, the models achieved consistently high accuracy. Furthermore, we used the Convex Hull Algorithm to screen molecules with multiple prominent properties. These included potential candidates for high thermal stability thin films and long-wavelength TADF molecules. This work demonstrates that spectral descriptors provide a robust tool for property prediction across different molecular databases, potentially accelerating the discovery of high-performance multifunctional compounds.
Molecules with practical applications usually need to possess more than one outstanding property. However, in AI-driven functional molecule research, machine learning models can often only predict a single property in a single database due to the minimal overlap in molecular structures and properties between different databases. Herein, we propose spectral descriptor as a universal bridge across databases, effectively projecting molecular data from diverse domains into a shared physicochemical space for learning. To validate this concept, we selected three distinct datasets containing properties like HOMO-LUMO gap, singlet–triplet energy gap, and molecular surface electrostatic potential, then employed spectral descriptors to evaluate both their in-dataset learning performance and cross-dataset transferability. In all cases, the models achieved consistently high accuracy. Furthermore, we used the Convex Hull Algorithm to screen molecules with multiple prominent properties. These included potential candidates for high thermal stability thin films and long-wavelength TADF molecules. This work demonstrates that spectral descriptors provide a robust tool for property prediction across different molecular databases, potentially accelerating the discovery of high-performance multifunctional compounds.
2027, 38(1): 112177
doi: 10.1016/j.cclet.2025.112177
Abstract:
Efficient utilization of carbon resources while simultaneously reducing carbon dioxide emissions is crucial for addressing the energy crisis and achieving environmental sustainability. To enable the valorization of organic pollutants in wastewater, we propose a laser-driven reforming strategy of wastewater, such as papermaking black liquor to H2 (57.1 μmol/h) and CO (30.5 μmol/h) with only negligible amounts of CO2 generated. In this system, laser serves as the sole energy input, while iron fiber felt functions as both the laser absorber and catalyst. This approach demonstrates broad applicability to the reforming of diverse organic substances, including dyes, antibiotics, microplastics, biomass, and microorganism s to adjustable syngas. Notably, the laser-induced localized high temperature facilitates rapid carbonization of organic matter, while the laser-triggered water plasma activation promotes further reforming of organic carbon, then adjustable syngas was produced with high energy efficiency and low cost (H2/CO ≈ 2:0.7 US$/m3). This laser-driven catalytic process provides an environmentally friendly and energy-efficient route for the resource recovery of highly concentrated organic pollutants, highlighting its potential in environmental remediation and sustainable energy applications.
Efficient utilization of carbon resources while simultaneously reducing carbon dioxide emissions is crucial for addressing the energy crisis and achieving environmental sustainability. To enable the valorization of organic pollutants in wastewater, we propose a laser-driven reforming strategy of wastewater, such as papermaking black liquor to H2 (57.1 μmol/h) and CO (30.5 μmol/h) with only negligible amounts of CO2 generated. In this system, laser serves as the sole energy input, while iron fiber felt functions as both the laser absorber and catalyst. This approach demonstrates broad applicability to the reforming of diverse organic substances, including dyes, antibiotics, microplastics, biomass, and microorganism s to adjustable syngas. Notably, the laser-induced localized high temperature facilitates rapid carbonization of organic matter, while the laser-triggered water plasma activation promotes further reforming of organic carbon, then adjustable syngas was produced with high energy efficiency and low cost (H2/CO ≈ 2:0.7 US$/m3). This laser-driven catalytic process provides an environmentally friendly and energy-efficient route for the resource recovery of highly concentrated organic pollutants, highlighting its potential in environmental remediation and sustainable energy applications.
2027, 38(1): 112364
doi: 10.1016/j.cclet.2026.112364
Abstract:
Acetaminophen (APAP), a classic analgesic and antipyretic drug, exhibits complex antioxidant and pro-oxidant pharmacological activities in the nervous system, yet the underlying mechanisms remain unclear. Sulfite (SO32−) and hypochlorite (ClO−), as reactive sulfur and oxygen species, respectively, participate in regulating cellular oxidative stress to maintain redox homeostasis. Monitoring their dynamics changes is crucial for understanding APAP’s pharmacological mechanisms and guiding drug development. In this study, a dual-fluorophore, dual-site-specific probe synthesized via a click reaction, enabling rapid and sensitive real-time monitoring of SO32− and ClO−. Through flexible assembly of a benzopyrylium salt and a N,N-dimethylthiocarbamate ester via click chemistry, we developed a probe capable of synchronous dual-channel visualization of SO32− and ClO− within the same spatiotemporal context in APAP-treated PC12 cells. This study for the first time reveals the antioxidant reversal effect during APAP exposure and identifies a dynamic negative correlation between SO32− and ClO− in redox regulation. These findings provide mechanistic insights into the pharmacological actions of APAP and underscore the interplay between reactive sulfur and oxygen species in redox modulation. Moreover, it demonstrates the potential of dual-fluorophore, dual-site probes in monitoring molecular interactions.
Acetaminophen (APAP), a classic analgesic and antipyretic drug, exhibits complex antioxidant and pro-oxidant pharmacological activities in the nervous system, yet the underlying mechanisms remain unclear. Sulfite (SO32−) and hypochlorite (ClO−), as reactive sulfur and oxygen species, respectively, participate in regulating cellular oxidative stress to maintain redox homeostasis. Monitoring their dynamics changes is crucial for understanding APAP’s pharmacological mechanisms and guiding drug development. In this study, a dual-fluorophore, dual-site-specific probe synthesized via a click reaction, enabling rapid and sensitive real-time monitoring of SO32− and ClO−. Through flexible assembly of a benzopyrylium salt and a N,N-dimethylthiocarbamate ester via click chemistry, we developed a probe capable of synchronous dual-channel visualization of SO32− and ClO− within the same spatiotemporal context in APAP-treated PC12 cells. This study for the first time reveals the antioxidant reversal effect during APAP exposure and identifies a dynamic negative correlation between SO32− and ClO− in redox regulation. These findings provide mechanistic insights into the pharmacological actions of APAP and underscore the interplay between reactive sulfur and oxygen species in redox modulation. Moreover, it demonstrates the potential of dual-fluorophore, dual-site probes in monitoring molecular interactions.
2027, 38(1): 112365
doi: 10.1016/j.cclet.2026.112365
Abstract:
Diabetic foot ulcers (DFUs) remain a major clinical challenge due to impaired healing, recurrent infection, and oxidative stress, highlighting the need for advanced therapies. Here, we present a dual pH/reactive oxygen species (ROS)-responsive hydrogel microneedle (MN) system (HGCD-MNs), fabricated from hyaluronic acid methacrylate (HAMA) to ensure biodegradability, water retention, controlled release, and mechanical strength, and incorporating gallic acid-derived carbon dots (G-CDs) for synergistic treatment. G-CDs, synthesized via a one-pot hydrothermal method, showed strong antibacterial activity against drug-resistant pathogens through membrane disruption and metabolic inhibition, while also exerting antioxidant and anti-inflammatory effects by scavenging ROS and promoting macrophage polarization toward a reparative M2 phenotype. In vitro, HGCD-MNs reduced methicillin-resistant Staphylococcus aureus (MRSA) by 99% and lowered intracellular ROS levels by over 90%. In diabetic mice, they interrupted the cycle of infection, oxidative stress, and inflammation, reducing bacterial burden by >90%, downregulating pro-inflammatory cytokines (tumor necrosis factor-alpha (TNF-α), interleukin-6 (IL-6)), and accelerating wound repair via enhanced angiogenesis and collagen remodeling. Notably, HGCD-MN treatment achieved 99% wound closure within 11 days, significantly outperforming controls. This multifunctional platform, integrating dual pH/ROS responsiveness with MN delivery, provides a comprehensive strategy combining biofilm disruption, oxidative stress regulation, and tissue regeneration, underscoring its translational potential for refractory DFUs.
Diabetic foot ulcers (DFUs) remain a major clinical challenge due to impaired healing, recurrent infection, and oxidative stress, highlighting the need for advanced therapies. Here, we present a dual pH/reactive oxygen species (ROS)-responsive hydrogel microneedle (MN) system (HGCD-MNs), fabricated from hyaluronic acid methacrylate (HAMA) to ensure biodegradability, water retention, controlled release, and mechanical strength, and incorporating gallic acid-derived carbon dots (G-CDs) for synergistic treatment. G-CDs, synthesized via a one-pot hydrothermal method, showed strong antibacterial activity against drug-resistant pathogens through membrane disruption and metabolic inhibition, while also exerting antioxidant and anti-inflammatory effects by scavenging ROS and promoting macrophage polarization toward a reparative M2 phenotype. In vitro, HGCD-MNs reduced methicillin-resistant Staphylococcus aureus (MRSA) by 99% and lowered intracellular ROS levels by over 90%. In diabetic mice, they interrupted the cycle of infection, oxidative stress, and inflammation, reducing bacterial burden by >90%, downregulating pro-inflammatory cytokines (tumor necrosis factor-alpha (TNF-α), interleukin-6 (IL-6)), and accelerating wound repair via enhanced angiogenesis and collagen remodeling. Notably, HGCD-MN treatment achieved 99% wound closure within 11 days, significantly outperforming controls. This multifunctional platform, integrating dual pH/ROS responsiveness with MN delivery, provides a comprehensive strategy combining biofilm disruption, oxidative stress regulation, and tissue regeneration, underscoring its translational potential for refractory DFUs.
2027, 38(1): 112374
doi: 10.1016/j.cclet.2026.112374
Abstract:
Microwave hyperthermia (MWT) is an emerging treatment method that utilizes microwave (MW) energy to heat and kill tumor cells. Reactive oxygen species (ROS) can enhance the therapeutic efficacy of MWT by suppressing the expression of heat shock proteins (HSP). However, the ROS generation induced by MW is inefficient due to its low quantum energy. To address this, we fabricate a MW-meditated thermoelectric-catalytical nanoplatform Te@PDA@BSA (TPB). Under MW irradiation, TPB exhibits a marked thermal effect, which can be utilized to create a thermoelectric field that trigger electron-hole pairs to produce ROS, thereby enhancing MWT. During ROS generation, Te (0) is oxidized to Te (4+). By doing so, it depletes glutathione (GSH), thereby exacerbating oxidative stress and ultimately enhancing the efficacy of dynamic therapy. Both in vivo and in vitro results confirm that TPB have remarkable antitumor effects under MW irradiation. This work offers novel insights for addressing the challenges of MW-mediated cancer therapy.
Microwave hyperthermia (MWT) is an emerging treatment method that utilizes microwave (MW) energy to heat and kill tumor cells. Reactive oxygen species (ROS) can enhance the therapeutic efficacy of MWT by suppressing the expression of heat shock proteins (HSP). However, the ROS generation induced by MW is inefficient due to its low quantum energy. To address this, we fabricate a MW-meditated thermoelectric-catalytical nanoplatform Te@PDA@BSA (TPB). Under MW irradiation, TPB exhibits a marked thermal effect, which can be utilized to create a thermoelectric field that trigger electron-hole pairs to produce ROS, thereby enhancing MWT. During ROS generation, Te (0) is oxidized to Te (4+). By doing so, it depletes glutathione (GSH), thereby exacerbating oxidative stress and ultimately enhancing the efficacy of dynamic therapy. Both in vivo and in vitro results confirm that TPB have remarkable antitumor effects under MW irradiation. This work offers novel insights for addressing the challenges of MW-mediated cancer therapy.
2027, 38(1): 112385
doi: 10.1016/j.cclet.2026.112385
Abstract:
The hydrogen evolution reaction (HER) is a pivotal process in electrochemical water splitting for sustainable energy systems. Despite their unmatched catalytic activity, Pt-based materials face challenges in commercialization due to low precious metal atom utilization and structural instability. Here, we report a dual-engineering strategy that integrates strong metal-support interaction (SMSI) with surface hydrogen-bond network engineering to construct F and Cl co-doped carbon nanomaterial-supported Pt nanoclusters, achieving high atomic activity and stability for hydrogen evolution reaction. In the unique 0D/2D heterojunctions, the SMSI effect modulates the Pt d-band center, optimizing hydrogen adsorption free energy. Further, the introduction of 4-dimethylaminopyridine enhances the surface hydrogen-bond network, enabling the catalyst to achieve a low overpotential of 56 mV at 100 mA/cm2 with the remarkable stability over 50 h. This work establishes a new paradigm for developing next-generation electrocatalysts with tailored electronic and interfacial properties, concurrently enhancing atomic efficiency, structural stability, and reaction kinetics.
The hydrogen evolution reaction (HER) is a pivotal process in electrochemical water splitting for sustainable energy systems. Despite their unmatched catalytic activity, Pt-based materials face challenges in commercialization due to low precious metal atom utilization and structural instability. Here, we report a dual-engineering strategy that integrates strong metal-support interaction (SMSI) with surface hydrogen-bond network engineering to construct F and Cl co-doped carbon nanomaterial-supported Pt nanoclusters, achieving high atomic activity and stability for hydrogen evolution reaction. In the unique 0D/2D heterojunctions, the SMSI effect modulates the Pt d-band center, optimizing hydrogen adsorption free energy. Further, the introduction of 4-dimethylaminopyridine enhances the surface hydrogen-bond network, enabling the catalyst to achieve a low overpotential of 56 mV at 100 mA/cm2 with the remarkable stability over 50 h. This work establishes a new paradigm for developing next-generation electrocatalysts with tailored electronic and interfacial properties, concurrently enhancing atomic efficiency, structural stability, and reaction kinetics.
2027, 38(1): 112386
doi: 10.1016/j.cclet.2026.112386
Abstract:
The clinical utility of doxorubicin (DOX) is significantly hampered by its non-selective cytotoxicity and the absence of desirable carriers. While human serum albumin (HSA) represents an excellent candidate for drug delivery, its application is often limited by a weak binding affinity for many therapeutic agents. Herein, a modular strategy was employed to construct HSA-based DOX prodrug nanoparticles (DOX-C14 &HSA NPs) to overcome these deficiencies. To improve tumor selectivity and the HSA-binding affinity of DOX, a pH-sensitive prodrug (DOX-C14) was first synthesized by conjugating DOX to myristic acid (C14) through a hydrazone linkage. Subsequently, through a simple sonication method and by regulating the optimal mass ratio of DOX-C14 to HSA at 1:1.5, we successfully produced DOX-C14 &HSA NPs that exhibited high stability, high encapsulation efficiency and significant drug loading. DOX-C14 &HSA NPs significantly improved the circulation time of DOX and efficiently released free DOX inside tumor cells, causing DNA damage and thus killing tumor cells. Consequently, this work not only overcomes the limitations of DOX but also introduces a new strategy applicable to other drugs for creating HSA-based nano-drugs, thereby broadening the potential of HSA in cancer therapy.
The clinical utility of doxorubicin (DOX) is significantly hampered by its non-selective cytotoxicity and the absence of desirable carriers. While human serum albumin (HSA) represents an excellent candidate for drug delivery, its application is often limited by a weak binding affinity for many therapeutic agents. Herein, a modular strategy was employed to construct HSA-based DOX prodrug nanoparticles (DOX-C14 &HSA NPs) to overcome these deficiencies. To improve tumor selectivity and the HSA-binding affinity of DOX, a pH-sensitive prodrug (DOX-C14) was first synthesized by conjugating DOX to myristic acid (C14) through a hydrazone linkage. Subsequently, through a simple sonication method and by regulating the optimal mass ratio of DOX-C14 to HSA at 1:1.5, we successfully produced DOX-C14 &HSA NPs that exhibited high stability, high encapsulation efficiency and significant drug loading. DOX-C14 &HSA NPs significantly improved the circulation time of DOX and efficiently released free DOX inside tumor cells, causing DNA damage and thus killing tumor cells. Consequently, this work not only overcomes the limitations of DOX but also introduces a new strategy applicable to other drugs for creating HSA-based nano-drugs, thereby broadening the potential of HSA in cancer therapy.
2027, 38(1): 112387
doi: 10.1016/j.cclet.2026.112387
Abstract:
Psoriasis is a systemic autoimmune dermatosis characterized by cutaneous microbiome dysbiosis and inflammatory cell infiltration. Current pharmacological interventions are often limited by inadequate skin penetration, systemic toxicity, low bioavailability, and the potential disruption of the skin’s native microbial ecosystem. In this study, we found that two live bacterial species, Propionibacterium acnes (PA) and Lactobacillus rhamnosus (LR), when encapsulated in hydrogels, exhibit significant therapeutic efficacy against psoriasis. Upon topical application, the hydrogel acts as an effective delivery vehicle, prolonging bacterial survival and enhancing colonization. These live bacteria help restore microbial homeostasis by competitively excluding pathogenic species. Moreover, both the bacteria and their metabolites modulate local immune responses, mitigating excessive immune activation and thereby achieving superior therapeutic outcomes in psoriasis management. This work suggests a promising avenue for the clinical application of live bacteria in the treatment of psoriasis.
Psoriasis is a systemic autoimmune dermatosis characterized by cutaneous microbiome dysbiosis and inflammatory cell infiltration. Current pharmacological interventions are often limited by inadequate skin penetration, systemic toxicity, low bioavailability, and the potential disruption of the skin’s native microbial ecosystem. In this study, we found that two live bacterial species, Propionibacterium acnes (PA) and Lactobacillus rhamnosus (LR), when encapsulated in hydrogels, exhibit significant therapeutic efficacy against psoriasis. Upon topical application, the hydrogel acts as an effective delivery vehicle, prolonging bacterial survival and enhancing colonization. These live bacteria help restore microbial homeostasis by competitively excluding pathogenic species. Moreover, both the bacteria and their metabolites modulate local immune responses, mitigating excessive immune activation and thereby achieving superior therapeutic outcomes in psoriasis management. This work suggests a promising avenue for the clinical application of live bacteria in the treatment of psoriasis.
2027, 38(1): 112399
doi: 10.1016/j.cclet.2026.112399
Abstract:
Despite the well-established diversity of fungal natural products, their biosynthetic potential for ribosomally synthesized and post-translationally modified peptides (RiPPs) remains largely unexplored. In this study, we report the discovery and characterization of acalitide B, a novel macrocyclic fungal RiPP isolated from the solid-state culture of Acaulium album H-JQSF. Acalitide B exhibits a unique head-to-tail cyclized scaffold featuring a methylpyrroloindoline moiety and two disulfide bridges. Structural elucidation was accomplished through comprehensive spectroscopic analysis, and the absolute configuration was unequivocally determined by single-crystal X-ray diffraction. Biosynthetic analysis suggests the involvement of disulfide isomerase, peptidase, and methyltransferase in its maturation. Notably, acalitide B displayed significant neuroprotective effects in Parkinson's disease models, underscoring its potential as a promising scaffold for drug development.
Despite the well-established diversity of fungal natural products, their biosynthetic potential for ribosomally synthesized and post-translationally modified peptides (RiPPs) remains largely unexplored. In this study, we report the discovery and characterization of acalitide B, a novel macrocyclic fungal RiPP isolated from the solid-state culture of Acaulium album H-JQSF. Acalitide B exhibits a unique head-to-tail cyclized scaffold featuring a methylpyrroloindoline moiety and two disulfide bridges. Structural elucidation was accomplished through comprehensive spectroscopic analysis, and the absolute configuration was unequivocally determined by single-crystal X-ray diffraction. Biosynthetic analysis suggests the involvement of disulfide isomerase, peptidase, and methyltransferase in its maturation. Notably, acalitide B displayed significant neuroprotective effects in Parkinson's disease models, underscoring its potential as a promising scaffold for drug development.
Phenothiazine sulfone rhodamines: Synthesis, photophysical properties and applications in bioimaging
2027, 38(1): 112401
doi: 10.1016/j.cclet.2026.112401
Abstract:
Novel rhodamine dyes with long emission wavelength, large Stokes shift, and adequate chemo/photostablity are sought-after for their broad potential utilities in fluorescence imaging. Herein, by taking advantage of a phenothiazine sulfone moiety as one of the electron donating group, a new family of asymmetric rhodamine dyes PSR1-4 and their esterification derivatives PSR1E-4E were constructed. PSR1-4 and PSR1E-4E displayed impressive photophysical properties including high absorption extinction coefficients (1100-133,600 L mol−1 cm−1), relatively long emission wavelength (587-613 nm), large Stokes shifts (43-78 nm), good photostability, excellent chemical stability and adequate fluorescence quantum yield in aqueous solution (1.3%-15.1%). Moreover, PSR4E displayed excellent mitochondria targeting property with a corresponding Pearson’s correlation coefficient value of 0.92. In addition, PSR4E showed superior photobleaching resistance and cell fixation tolerance than other commercial mitochondria trackers. By taking advantage of PSR4 as the platform, a robust HClO probe PSR4-HClO was developed, which is capable of monitoring the endogenous generated HClO in both living cells and the liver of DILI model mice. We expect that the design strategy utilized in this work may open a new avenue for the development of novel high-performance fluorescent dyes.
Novel rhodamine dyes with long emission wavelength, large Stokes shift, and adequate chemo/photostablity are sought-after for their broad potential utilities in fluorescence imaging. Herein, by taking advantage of a phenothiazine sulfone moiety as one of the electron donating group, a new family of asymmetric rhodamine dyes PSR1-4 and their esterification derivatives PSR1E-4E were constructed. PSR1-4 and PSR1E-4E displayed impressive photophysical properties including high absorption extinction coefficients (1100-133,600 L mol−1 cm−1), relatively long emission wavelength (587-613 nm), large Stokes shifts (43-78 nm), good photostability, excellent chemical stability and adequate fluorescence quantum yield in aqueous solution (1.3%-15.1%). Moreover, PSR4E displayed excellent mitochondria targeting property with a corresponding Pearson’s correlation coefficient value of 0.92. In addition, PSR4E showed superior photobleaching resistance and cell fixation tolerance than other commercial mitochondria trackers. By taking advantage of PSR4 as the platform, a robust HClO probe PSR4-HClO was developed, which is capable of monitoring the endogenous generated HClO in both living cells and the liver of DILI model mice. We expect that the design strategy utilized in this work may open a new avenue for the development of novel high-performance fluorescent dyes.
2027, 38(1): 112423
doi: 10.1016/j.cclet.2026.112423
Abstract:
Ovarian cancer (OC) is often characterized by its “immunologically cold” nature, with low immunogenicity and an immunosuppressive tumor microenvironment. Cuproptosis, a novel form of regulated cell death triggered by intracellular copper levels, has a profound impact on cancer immunity. However, the activation of cuproptosis to enhance antitumor immunity is consistently hindered by intracellular Cu2+ levels. To address this, a glutathione (GSH)-sensitive cuproptosis nanoplatform (NP@DoxCu) was constructed using a GSH-sensitive polymer (PSSP), doxorubicin (Dox) and Cu2+. After entering the cell, NP@DoxCu rapidly degraded under the action of intracellular reductase and low pH environment. Cu2+ works synergistically with Dox, not only leading to the direct killing of cancer cells but also inducing immunogenic cell death (ICD). Moreover, NP@DoxCu induces repolarization of tumor-associated macrophages (TAMs) and regulates T cells, thereby reshaping the tumor immune microenvironment for effective immunotherapy in vivo. This combination of cuproptosis with immunotherapy presents a new strategy for OC treatment.
Ovarian cancer (OC) is often characterized by its “immunologically cold” nature, with low immunogenicity and an immunosuppressive tumor microenvironment. Cuproptosis, a novel form of regulated cell death triggered by intracellular copper levels, has a profound impact on cancer immunity. However, the activation of cuproptosis to enhance antitumor immunity is consistently hindered by intracellular Cu2+ levels. To address this, a glutathione (GSH)-sensitive cuproptosis nanoplatform (NP@DoxCu) was constructed using a GSH-sensitive polymer (PSSP), doxorubicin (Dox) and Cu2+. After entering the cell, NP@DoxCu rapidly degraded under the action of intracellular reductase and low pH environment. Cu2+ works synergistically with Dox, not only leading to the direct killing of cancer cells but also inducing immunogenic cell death (ICD). Moreover, NP@DoxCu induces repolarization of tumor-associated macrophages (TAMs) and regulates T cells, thereby reshaping the tumor immune microenvironment for effective immunotherapy in vivo. This combination of cuproptosis with immunotherapy presents a new strategy for OC treatment.
2027, 38(1): 112474
doi: 10.1016/j.cclet.2026.112474
Abstract:
Transition metal-based materials have attracted significant interests in supercapacitors and electrocatalysts owing to their tunable electronic structures and rich redox activities. However, their practical applications are hindered by insufficient electrical conductivity and poor structural stability. Herein, NiSe@NiCo-MOF electrode material is synthesized via a two-step solvothermal route, achieving the synergistic optimization of structure and electrochemical performance. The obtained products deliver the specific capacity of 1230 C/g at 1 A/g and maintains 87.7% of its initial capacity after 15,000 times cycling. For the oxygen evolution reaction, the composite catalyst presents a low overpotential and a small Tafel slope. Its performance remains stable during continuous operation for 90 h. This work demonstrates a general strategy to design high-performance electrode materials for energy storage and conversion.
Transition metal-based materials have attracted significant interests in supercapacitors and electrocatalysts owing to their tunable electronic structures and rich redox activities. However, their practical applications are hindered by insufficient electrical conductivity and poor structural stability. Herein, NiSe@NiCo-MOF electrode material is synthesized via a two-step solvothermal route, achieving the synergistic optimization of structure and electrochemical performance. The obtained products deliver the specific capacity of 1230 C/g at 1 A/g and maintains 87.7% of its initial capacity after 15,000 times cycling. For the oxygen evolution reaction, the composite catalyst presents a low overpotential and a small Tafel slope. Its performance remains stable during continuous operation for 90 h. This work demonstrates a general strategy to design high-performance electrode materials for energy storage and conversion.
2027, 38(1): 112504
doi: 10.1016/j.cclet.2026.112504
Abstract:
Salmonella remains a leading cause of foodborne illnesses worldwide. Here, we present a novel in situ detection platform for broad-spectrum Salmonella imaging, combining polydopamine (PDA) deposition with perovskite quantum dot composite nanoparticles (CsPbBr3@SiO2 QDs) to achieve remarkable signal amplification. We have developed a broad-spectrum monoclonal antibody that targets the most conserved epitope of the outer membrane protein F, enabling it to recognize all the Salmonella serotypes tested. Then, horseradish peroxidase (HRP) catalyzed the rapid deposition of PDA on the bacterial surface. The PDA-coated bacteria subsequently bind to aminated CsPbBr3@SiO2 QDs, resulting in a significant enhancement of fluorescence signals. This innovative strategy facilitates the direct visualization of Salmonella at the single-cell level and covers an extensive detection range from 103 CFU/mL to 106 CFU/mL, achieving sensitive detection of Salmonella at 100 CFU/mL within 4 h without time-consuming amplification or culturing procedures. The platform offers a rapid and sensitive tool for Salmonella detection, demonstrating significant potential in food safety and public health applications.
Salmonella remains a leading cause of foodborne illnesses worldwide. Here, we present a novel in situ detection platform for broad-spectrum Salmonella imaging, combining polydopamine (PDA) deposition with perovskite quantum dot composite nanoparticles (CsPbBr3@SiO2 QDs) to achieve remarkable signal amplification. We have developed a broad-spectrum monoclonal antibody that targets the most conserved epitope of the outer membrane protein F, enabling it to recognize all the Salmonella serotypes tested. Then, horseradish peroxidase (HRP) catalyzed the rapid deposition of PDA on the bacterial surface. The PDA-coated bacteria subsequently bind to aminated CsPbBr3@SiO2 QDs, resulting in a significant enhancement of fluorescence signals. This innovative strategy facilitates the direct visualization of Salmonella at the single-cell level and covers an extensive detection range from 103 CFU/mL to 106 CFU/mL, achieving sensitive detection of Salmonella at 100 CFU/mL within 4 h without time-consuming amplification or culturing procedures. The platform offers a rapid and sensitive tool for Salmonella detection, demonstrating significant potential in food safety and public health applications.
2027, 38(1): 112526
doi: 10.1016/j.cclet.2026.112526
Abstract:
Precise control over the distance and strength of Pt(Ⅱ)···Pt(Ⅱ) metallophilic interactions remains a significant challenge in supramolecular photophysics. Herein, we report a novel trinuclear platinum(Ⅱ) complex (MC2) built upon a hydrogen-bonded aromatic acylhydrazone macrocycle. The electron-rich cavity of MC2 enables selective host–guest complexation with electron-deficient pyridinium salts, leading to the formation of either sandwich-type or pseudo[4]rotaxane architectures depending on guest valency and geometry. These supramolecular interactions act as a molecular ruler, effectively modulating the intermacrocyclic distance and thereby fine-tuning the extent of Pt(Ⅱ)···Pt(Ⅱ) contacts. As a direct consequence, the system exhibits guest-dependent near-infrared (NIR) luminescence (~730 nm) originating from a metal–metal–to–ligand charge-transfer (MMLCT) excited state. Notably, the emission intensity can be precisely regulated by varying the length and binding mode of the pyridinium guests, with optimal Pt···Pt interactions achieved at an intermolecular distance of ~4.6 Å. Moreover, host–guest complexation triggers a hierarchical morphological transformation, from spherical nano-particles to well-defined nanofibers, driven by enhanced face-to-face stacking. This work establishes a versatile supramolecular strategy for the external, guest-mediated control of metallophilic interactions and paves the way for the rational design of stimuli-responsive luminescent materials based on platinum(Ⅱ) macrocycles.
Precise control over the distance and strength of Pt(Ⅱ)···Pt(Ⅱ) metallophilic interactions remains a significant challenge in supramolecular photophysics. Herein, we report a novel trinuclear platinum(Ⅱ) complex (MC2) built upon a hydrogen-bonded aromatic acylhydrazone macrocycle. The electron-rich cavity of MC2 enables selective host–guest complexation with electron-deficient pyridinium salts, leading to the formation of either sandwich-type or pseudo[4]rotaxane architectures depending on guest valency and geometry. These supramolecular interactions act as a molecular ruler, effectively modulating the intermacrocyclic distance and thereby fine-tuning the extent of Pt(Ⅱ)···Pt(Ⅱ) contacts. As a direct consequence, the system exhibits guest-dependent near-infrared (NIR) luminescence (~730 nm) originating from a metal–metal–to–ligand charge-transfer (MMLCT) excited state. Notably, the emission intensity can be precisely regulated by varying the length and binding mode of the pyridinium guests, with optimal Pt···Pt interactions achieved at an intermolecular distance of ~4.6 Å. Moreover, host–guest complexation triggers a hierarchical morphological transformation, from spherical nano-particles to well-defined nanofibers, driven by enhanced face-to-face stacking. This work establishes a versatile supramolecular strategy for the external, guest-mediated control of metallophilic interactions and paves the way for the rational design of stimuli-responsive luminescent materials based on platinum(Ⅱ) macrocycles.
2027, 38(1): 112550
doi: 10.1016/j.cclet.2026.112550
Abstract:
In this work, we report the synthesis and optical characterization of a divalent tin (Sn2+)-doped organic-inorganic zinc (Zn2+)-based compound, (DFPD)2ZnCl4·H2O (DFPD+ = 4,4-difluoropiperidinium), which exhibits notable PL quenching at relatively low temperatures. At room temperature, it emits stable green light with a high PL quantum yield of 97%. Upon heating above 340 K, dehydration induces a structural transformation, resulting in an irreversible, stepwise quenching of its luminescence. Unlike most reported thermochromic materials, which generally require high PL quenching temperatures (>400 K), the relatively low deactivation temperature of (DFPD)2ZnCl4·H2O: Sn2+ makes it particularly suitable for enhancing the security of adhesive anti-counterfeiting labels.
In this work, we report the synthesis and optical characterization of a divalent tin (Sn2+)-doped organic-inorganic zinc (Zn2+)-based compound, (DFPD)2ZnCl4·H2O (DFPD+ = 4,4-difluoropiperidinium), which exhibits notable PL quenching at relatively low temperatures. At room temperature, it emits stable green light with a high PL quantum yield of 97%. Upon heating above 340 K, dehydration induces a structural transformation, resulting in an irreversible, stepwise quenching of its luminescence. Unlike most reported thermochromic materials, which generally require high PL quenching temperatures (>400 K), the relatively low deactivation temperature of (DFPD)2ZnCl4·H2O: Sn2+ makes it particularly suitable for enhancing the security of adhesive anti-counterfeiting labels.
2027, 38(1): 112554
doi: 10.1016/j.cclet.2026.112554
Abstract:
Heparin cannot be administered orally due to its poor intestinal mucus permeability and limited cellular membrane penetration. To address the challenge, we developed a new nanoplatform through electrostatically driven self-assembly of enoxaparin sodium (ENO) with cationic chitosan (CS), followed by surface functionalization with poly(α-lipoic acid) (pLA). The resulting pLA@CS/ENO exhibited a mucus penetration rate of 61.2% within 4 h, 3.7 and 1.7 times that of free ENO and CS/ENO, respectively, due to polydisulfide-driven mucin network depolymerization. Through thiol-mediated cellular uptake, the pLA@CS/ENO achieved 2.2 times the cytoplasmic delivery efficiency of CS/ENO within 6 h. Additionally, pLA@CS/ENO’s lower Pearson coefficients versus uncoated CS/ENO confirmed enhanced lysosomal escape via pLA-mediated membrane destabilization. Pharmacokinetically, pLA@CS/ENO established a sustained anticoagulation profile, prolonging the effective therapeutic duration to 8 h, significantly longer than that of free ENO (1 h) and CS/ENO (2 h), without increasing bleeding risk. In a rat model of coagulation, pLA@CS/ENO robustly reversed coagulopathic markers, with restoration rates exceeding 70%, and significantly mitigated microthrombosis and tissue injury in the livers, kidneys and lungs. Collectively, this study demonstrates a novel oral nanotherapeutic strategy that sequentially overcomes the mucus and epithelial barriers, offering a promising platform for effective oral anticoagulation management.
Heparin cannot be administered orally due to its poor intestinal mucus permeability and limited cellular membrane penetration. To address the challenge, we developed a new nanoplatform through electrostatically driven self-assembly of enoxaparin sodium (ENO) with cationic chitosan (CS), followed by surface functionalization with poly(α-lipoic acid) (pLA). The resulting pLA@CS/ENO exhibited a mucus penetration rate of 61.2% within 4 h, 3.7 and 1.7 times that of free ENO and CS/ENO, respectively, due to polydisulfide-driven mucin network depolymerization. Through thiol-mediated cellular uptake, the pLA@CS/ENO achieved 2.2 times the cytoplasmic delivery efficiency of CS/ENO within 6 h. Additionally, pLA@CS/ENO’s lower Pearson coefficients versus uncoated CS/ENO confirmed enhanced lysosomal escape via pLA-mediated membrane destabilization. Pharmacokinetically, pLA@CS/ENO established a sustained anticoagulation profile, prolonging the effective therapeutic duration to 8 h, significantly longer than that of free ENO (1 h) and CS/ENO (2 h), without increasing bleeding risk. In a rat model of coagulation, pLA@CS/ENO robustly reversed coagulopathic markers, with restoration rates exceeding 70%, and significantly mitigated microthrombosis and tissue injury in the livers, kidneys and lungs. Collectively, this study demonstrates a novel oral nanotherapeutic strategy that sequentially overcomes the mucus and epithelial barriers, offering a promising platform for effective oral anticoagulation management.
2027, 38(1): 112562
doi: 10.1016/j.cclet.2026.112562
Abstract:
Melatonin is a key marker of circadian rhythm with significant relevance across diverse pathophysiological conditions. However, the substantial limitations of existing detection methods impede its broad implementation. Leveraging immuno-competition, flow-cytometric fluorescence detection, and artificial intelligence (AI)-based high-dimensional signal analysis, we developed a novel platform for melatonin quantification and applied it in patients with heart failure (HF). Results showed that phycoerythrin (PE)-labeled anti-melatonin antibodies were stably conjugated to allophycocyanin (APC)-fluorescent magnetic beads with a coupling efficiency ≥99%, and subsequent reaction with fluorescein isothiocyanate (FITC)–melatonin yielded a stable competitive assay system, as evidenced by FITC signals on flow cytometry. Using forward scatter, side scatter, APC, FITC, and PE multiparameter features from standard samples, an XGBoost model was constructed and optimized, achieving an R2 of 0.9956 and improving the recovery of the bead-based detection to 98.5%–101.2%. Compared with enzyme-linked immunosorbent assay, the AI-enhanced immunomagnetic bead assay demonstrated superior analytical precision (mean recovery 99.2% vs. 99.8%) and was implemented into a graphical interface supporting direct flow-cytometric data import. Application to serum samples from HF showed significantly reduced melatonin levels relative to healthy controls, with concentrations inversely correlated with age. Collectively, the AI-enhanced immunomagnetic bead assay provides accurate, low-cost, and scalable melatonin measurement, and its successful application in HF patients underscores its potential for circadian biomarker assessment across diverse physiological and pathological contexts.
Melatonin is a key marker of circadian rhythm with significant relevance across diverse pathophysiological conditions. However, the substantial limitations of existing detection methods impede its broad implementation. Leveraging immuno-competition, flow-cytometric fluorescence detection, and artificial intelligence (AI)-based high-dimensional signal analysis, we developed a novel platform for melatonin quantification and applied it in patients with heart failure (HF). Results showed that phycoerythrin (PE)-labeled anti-melatonin antibodies were stably conjugated to allophycocyanin (APC)-fluorescent magnetic beads with a coupling efficiency ≥99%, and subsequent reaction with fluorescein isothiocyanate (FITC)–melatonin yielded a stable competitive assay system, as evidenced by FITC signals on flow cytometry. Using forward scatter, side scatter, APC, FITC, and PE multiparameter features from standard samples, an XGBoost model was constructed and optimized, achieving an R2 of 0.9956 and improving the recovery of the bead-based detection to 98.5%–101.2%. Compared with enzyme-linked immunosorbent assay, the AI-enhanced immunomagnetic bead assay demonstrated superior analytical precision (mean recovery 99.2% vs. 99.8%) and was implemented into a graphical interface supporting direct flow-cytometric data import. Application to serum samples from HF showed significantly reduced melatonin levels relative to healthy controls, with concentrations inversely correlated with age. Collectively, the AI-enhanced immunomagnetic bead assay provides accurate, low-cost, and scalable melatonin measurement, and its successful application in HF patients underscores its potential for circadian biomarker assessment across diverse physiological and pathological contexts.
2027, 38(1): 112583
doi: 10.1016/j.cclet.2026.112583
Abstract:
The separation of methylbenzyl chloride isomers is one of the challenges facing the chemical industry. However, traditional separation methods suffer from excessive energy consumption, complicated operation, and unsatisfactory separation efficiency for substances with similar boiling points. Herein, we develop a novel adsorptive separation strategy for p-methylbenzyl chloride (pMBC) based on nonporous adaptive crystals (NACs) of perethylated pillar[6]arene (EtP6β) and perbromoethylated pillar[5]arene (BrP5α). EtP6β and BrP5α are proved to be highly effective in the separation of pMBC from the binary or ternary vapour mixtures of methylbenzyl chloride isomers. The single-crystal structures and DFT calculations indicate that the high selectivity stems from multiple noncovalent interactions between the hosts (EtP6 and BrP5) and the guest (pMBC), as well as the thermodynamic stability of the new stable single crystals formed by pMBC@EtP6 and pMBC@BrP5. Furthermore, the perfect size matching between pMBC and BrP5 also contributes to selective separation. In addition, EtP6β and BrP5α show significant recyclability and stability.
The separation of methylbenzyl chloride isomers is one of the challenges facing the chemical industry. However, traditional separation methods suffer from excessive energy consumption, complicated operation, and unsatisfactory separation efficiency for substances with similar boiling points. Herein, we develop a novel adsorptive separation strategy for p-methylbenzyl chloride (pMBC) based on nonporous adaptive crystals (NACs) of perethylated pillar[6]arene (EtP6β) and perbromoethylated pillar[5]arene (BrP5α). EtP6β and BrP5α are proved to be highly effective in the separation of pMBC from the binary or ternary vapour mixtures of methylbenzyl chloride isomers. The single-crystal structures and DFT calculations indicate that the high selectivity stems from multiple noncovalent interactions between the hosts (EtP6 and BrP5) and the guest (pMBC), as well as the thermodynamic stability of the new stable single crystals formed by pMBC@EtP6 and pMBC@BrP5. Furthermore, the perfect size matching between pMBC and BrP5 also contributes to selective separation. In addition, EtP6β and BrP5α show significant recyclability and stability.
2027, 38(1): 112597
doi: 10.1016/j.cclet.2026.112597
Abstract:
The clinical application of conventional chemotherapeutic drugs is often limited by systemic toxicity and insufficient tumor accumulation. Herein, we report a dual-responsive polymeric nanocarrier, PLGA-C8E nanoparticles (NPs), designed to enhance drug delivery by integrating morphology engineering with stimulus-responsive release. The NPs were fabricated via a phase separation-driven assembly process, resulting in a distinctive mushroom-like morphology composed of a poly(lactic-co-glycolic acid) (PLGA) vesicular domain and a Cys-8E-rich solid domain. Owing to the presence of ester and disulfide bonds, the nanocarriers exhibited pH- and glutathione-responsive drug release behavior. In vitro studies demonstrated good biocompatibility and efficient cellular uptake. In vivo biodistribution analysis revealed prolonged blood circulation and enhanced tumor-associated accumulation. Consequently, PTX@PLGA-C8E NPs achieved significantly improved tumor growth inhibition while maintaining favorable systemic biosafety. These results highlighted the critical role of non-spherical, mushroom-like morphology in modulating in vivo behavior and therapeutic efficacy, demonstrated the potential of shape-engineered nanocarriers in advancing nanomedicine design, which may offer valuable insights for the development of next-generation translational drug delivery systems.
The clinical application of conventional chemotherapeutic drugs is often limited by systemic toxicity and insufficient tumor accumulation. Herein, we report a dual-responsive polymeric nanocarrier, PLGA-C8E nanoparticles (NPs), designed to enhance drug delivery by integrating morphology engineering with stimulus-responsive release. The NPs were fabricated via a phase separation-driven assembly process, resulting in a distinctive mushroom-like morphology composed of a poly(lactic-co-glycolic acid) (PLGA) vesicular domain and a Cys-8E-rich solid domain. Owing to the presence of ester and disulfide bonds, the nanocarriers exhibited pH- and glutathione-responsive drug release behavior. In vitro studies demonstrated good biocompatibility and efficient cellular uptake. In vivo biodistribution analysis revealed prolonged blood circulation and enhanced tumor-associated accumulation. Consequently, PTX@PLGA-C8E NPs achieved significantly improved tumor growth inhibition while maintaining favorable systemic biosafety. These results highlighted the critical role of non-spherical, mushroom-like morphology in modulating in vivo behavior and therapeutic efficacy, demonstrated the potential of shape-engineered nanocarriers in advancing nanomedicine design, which may offer valuable insights for the development of next-generation translational drug delivery systems.
2027, 38(1): 112697
doi: 10.1016/j.cclet.2026.112697
Abstract:
Quantitative formation of hydrazone bond in water has been a challenge synthetically. To address this challenge, we prepared a highly water-soluble octaanionic rectangular macrocyclic box oaBox, which could remarkably promote and accelerate two- and three-component reactions of aldehyde and phenylhydrazine precursors in water to afford mono- and dihydrazones. Among eleven reactions investigated, ten reactions were promoted by oaBox to realize 95%-99% yields, while the yields of two reactions were increased from 0 to 61% and 95%, respectively. The reaction rate of the two-component reactions could be increased by up to 42.3 times. The inclusion of oaBox for both substrates and products is proposed to account for the reaction promotion and acceleration.
Quantitative formation of hydrazone bond in water has been a challenge synthetically. To address this challenge, we prepared a highly water-soluble octaanionic rectangular macrocyclic box oaBox, which could remarkably promote and accelerate two- and three-component reactions of aldehyde and phenylhydrazine precursors in water to afford mono- and dihydrazones. Among eleven reactions investigated, ten reactions were promoted by oaBox to realize 95%-99% yields, while the yields of two reactions were increased from 0 to 61% and 95%, respectively. The reaction rate of the two-component reactions could be increased by up to 42.3 times. The inclusion of oaBox for both substrates and products is proposed to account for the reaction promotion and acceleration.
2027, 38(1): 112796
doi: 10.1016/j.cclet.2026.112796
Abstract:
Inorganic-organic hybridization has emerged as an effective approach to activate organic room-temperature phosphorescence (RTP), yet the underlying luminescence mechanisms remain somewhat ambiguous. In this study, we have developed a novel inorganic-organic hybridization system with long-life RTP by choosing coumarin derivatives with donor–π–receptor (D–π–A) structures (7-HMCum, 7-DEAMCum and 7-AMCum) as the organic guests and heated boric acid (HBA, rigid boron oxide) as the inorganic matrix. By altering the substituents at 7-position of the coumarin guests, blue and green afterglow were obtained. Among them, 7-HMCum@HBA demonstrated outstanding phosphorescent properties, with a phosphorescence lifetime of 2.88 s, a phosphorescence quantum yield of 19.36% and afterglow duration of 24 s. Based on their photophysical investigation, molecular geometries and chemical bonding between the host and the guest in the ground state (O→B coordinate bond) and excited state (O–B covalent bond), as well as EPR measurement, dual-channel parallel luminescence mechanism was proposed. One is charge separation-long-range charge transfer-charge recombination luminescent channel in the case of the guest is photoirradiated; the other one involves Dexter energy transfer channel in the case of the host is photoirradiated. Dual-channel can work synergistically. Based on the long afterglow time and adjustable colors of the doped materials, application in the fields of information anti-counterfeiting and digital encryption has been demonstrated.
Inorganic-organic hybridization has emerged as an effective approach to activate organic room-temperature phosphorescence (RTP), yet the underlying luminescence mechanisms remain somewhat ambiguous. In this study, we have developed a novel inorganic-organic hybridization system with long-life RTP by choosing coumarin derivatives with donor–π–receptor (D–π–A) structures (7-HMCum, 7-DEAMCum and 7-AMCum) as the organic guests and heated boric acid (HBA, rigid boron oxide) as the inorganic matrix. By altering the substituents at 7-position of the coumarin guests, blue and green afterglow were obtained. Among them, 7-HMCum@HBA demonstrated outstanding phosphorescent properties, with a phosphorescence lifetime of 2.88 s, a phosphorescence quantum yield of 19.36% and afterglow duration of 24 s. Based on their photophysical investigation, molecular geometries and chemical bonding between the host and the guest in the ground state (O→B coordinate bond) and excited state (O–B covalent bond), as well as EPR measurement, dual-channel parallel luminescence mechanism was proposed. One is charge separation-long-range charge transfer-charge recombination luminescent channel in the case of the guest is photoirradiated; the other one involves Dexter energy transfer channel in the case of the host is photoirradiated. Dual-channel can work synergistically. Based on the long afterglow time and adjustable colors of the doped materials, application in the fields of information anti-counterfeiting and digital encryption has been demonstrated.
Chalcogen-doped carbon nanohoops with efficient near-infrared emission and singlet oxygen generation
2027, 38(1): 112797
doi: 10.1016/j.cclet.2026.112797
Abstract:
Donor-acceptor cycloparaphenylenes (D-A CPPs) represent a promising class of macrocyclic nanomaterials with finely adjustable photophysical properties. However, developing D-A CPPs with efficient near-infrared emission remains challenging due to inherent limitations in electronic modulation and quantum yield compromise. In this study, we designed and synthesized a series of chalcogen-engineered D-A CPPs by incorporating benzoselenadiazole or benzothiadiazole acceptors, synergistically combined with thiophene donors. Notably, precise control over the ring size, chalcogen type and solvent polarity enabled a significant redshift in emission, achieving wavelengths up to 731 nm-extending into the near-infrared region-while maintaining fluorescence efficiencies of 23.8%-58.8% in nonpolar toluene and 9.0%-50.4% in polar DMF. Furthermore, the introduction of selenium enhanced spin-orbit coupling, thereby promoting efficient singlet oxygen generation with a quantum yield as high as 40%. As a result, these compounds serve as effective photocatalysts, demonstrated through the selective oxidation of thioanisole to sulfoxide with high yield and selectivity under irradiation. Our work thus establishes an atom engineering strategy for developing functionalized nanohoops, offering substantial potential for advanced applications in photocatalysis and optical materials.
Donor-acceptor cycloparaphenylenes (D-A CPPs) represent a promising class of macrocyclic nanomaterials with finely adjustable photophysical properties. However, developing D-A CPPs with efficient near-infrared emission remains challenging due to inherent limitations in electronic modulation and quantum yield compromise. In this study, we designed and synthesized a series of chalcogen-engineered D-A CPPs by incorporating benzoselenadiazole or benzothiadiazole acceptors, synergistically combined with thiophene donors. Notably, precise control over the ring size, chalcogen type and solvent polarity enabled a significant redshift in emission, achieving wavelengths up to 731 nm-extending into the near-infrared region-while maintaining fluorescence efficiencies of 23.8%-58.8% in nonpolar toluene and 9.0%-50.4% in polar DMF. Furthermore, the introduction of selenium enhanced spin-orbit coupling, thereby promoting efficient singlet oxygen generation with a quantum yield as high as 40%. As a result, these compounds serve as effective photocatalysts, demonstrated through the selective oxidation of thioanisole to sulfoxide with high yield and selectivity under irradiation. Our work thus establishes an atom engineering strategy for developing functionalized nanohoops, offering substantial potential for advanced applications in photocatalysis and optical materials.
2027, 38(1): 112798
doi: 10.1016/j.cclet.2026.112798
Abstract:
The development of efficient photocatalysts for hydrogen peroxide (H2O2) generation is crucial for advancing sustainable chemical processes. Here, we report a rational design strategy in which uranyl (UO22+) sites are engineered into a copper-based metal coordination polymer (Cu-BPDC), yielding a bimetallic coordination polymer (Cu-UCP) with substantially improved semiconducting characteristics. This structural modification leads to a remarkable enhancement in photocatalytic activity, with Cu-UCP achieving a 27-fold higher H2O2 production rate than Cu-BPDC under visible-light irradiation. Mechanistic investigations reveal that the cooperative interaction between UO22+ and the Cu-based framework promotes more efficient charge-carrier separation, accelerates both the oxygen reduction (ORR) and water oxidation (WOR) reactions, and facilitates uranyl-driven hydrogen abstraction, collectively boosting H2O2 formation. These findings highlight the pivotal role of UO22+ in regulating photoredox pathways within bimetallic coordination polymers and offer a promising approach for designing advanced photocatalytic systems for solar-driven H2O2 production.
The development of efficient photocatalysts for hydrogen peroxide (H2O2) generation is crucial for advancing sustainable chemical processes. Here, we report a rational design strategy in which uranyl (UO22+) sites are engineered into a copper-based metal coordination polymer (Cu-BPDC), yielding a bimetallic coordination polymer (Cu-UCP) with substantially improved semiconducting characteristics. This structural modification leads to a remarkable enhancement in photocatalytic activity, with Cu-UCP achieving a 27-fold higher H2O2 production rate than Cu-BPDC under visible-light irradiation. Mechanistic investigations reveal that the cooperative interaction between UO22+ and the Cu-based framework promotes more efficient charge-carrier separation, accelerates both the oxygen reduction (ORR) and water oxidation (WOR) reactions, and facilitates uranyl-driven hydrogen abstraction, collectively boosting H2O2 formation. These findings highlight the pivotal role of UO22+ in regulating photoredox pathways within bimetallic coordination polymers and offer a promising approach for designing advanced photocatalytic systems for solar-driven H2O2 production.
2027, 38(1): 112814
doi: 10.1016/j.cclet.2026.112814
Abstract:
The development of reliable and accurate colorimetric detection methods using molecular probes offers significant advantages, such as low cost and rapid response, for the sensing of nerve agents. Leveraging the rich surface chemistry of quantum dots (QDs), we here designed and synthesized a molecular probe (3) bearing terminal pyridine and carboxyl groups, which was subsequently assembled onto ZnSe QDs via Zn–O coordination. Nuclear magnetic resonance spectroscopy, X-ray absorption near-edge structure analysis, and theoretical calculations collectively confirm the occurrence of interfacial charge transfer from the QDs to probe 3 under both ground-state and UV irradiation conditions. This charge transfer enhances the nucleophilicity of the terminal pyridine nitrogen atom, thereby promoting its catalytic protonation reaction with diethyl chlorophosphate (DCP, a simulant of nerve agents) in solution. Concurrently, the abundant surface chemistry of the QDs facilitates the enrichment of DCP around their surface, leading to an increased local concentration. As a result, an extremely low detection limit of 4.0 ppb is achieved in neutral aqueous solution, comparable to those reported for fluorescent probes containing pyridine active sites. This work clearly demonstrates that QD-based chemosensors can serve as effective platforms for the colorimetric detection of nerve agent simulants and beyond.
The development of reliable and accurate colorimetric detection methods using molecular probes offers significant advantages, such as low cost and rapid response, for the sensing of nerve agents. Leveraging the rich surface chemistry of quantum dots (QDs), we here designed and synthesized a molecular probe (3) bearing terminal pyridine and carboxyl groups, which was subsequently assembled onto ZnSe QDs via Zn–O coordination. Nuclear magnetic resonance spectroscopy, X-ray absorption near-edge structure analysis, and theoretical calculations collectively confirm the occurrence of interfacial charge transfer from the QDs to probe 3 under both ground-state and UV irradiation conditions. This charge transfer enhances the nucleophilicity of the terminal pyridine nitrogen atom, thereby promoting its catalytic protonation reaction with diethyl chlorophosphate (DCP, a simulant of nerve agents) in solution. Concurrently, the abundant surface chemistry of the QDs facilitates the enrichment of DCP around their surface, leading to an increased local concentration. As a result, an extremely low detection limit of 4.0 ppb is achieved in neutral aqueous solution, comparable to those reported for fluorescent probes containing pyridine active sites. This work clearly demonstrates that QD-based chemosensors can serve as effective platforms for the colorimetric detection of nerve agent simulants and beyond.
2027, 38(1): 112828
doi: 10.1016/j.cclet.2026.112828
Abstract:
The organic pollutants emitted from industrial and agricultural activities pose a threat to water security and ecosystem health, creating an urgent demand for efficient treatment strategies. Coordination chemistry offers a viable route to enhance treatment selectivity by modulating pollutant reactivity. The phosphonate possesses the dual characteristics of persistent pollutants and efficient iron chelating ligands, making them particularly suitable for selective oxidation reactions and guiding reaction pathways. In this study, the selective oxidative degradation of phosphonate in the microscale zero valent iron (mZVI/air) system and its underlying mechanism were systematically studied. The coordination between phosphonates and iron ions was found to be central to the enhanced degradation performance. The results showed that the COD removal efficiency of ethylenediamine tetramethylene phosphonic acid (EDTMP) reached 94.5% within 30 min, and the iron utilization efficiency was 9.9 and 7.3 times higher than those of phenol and benzoic acid, respectively. Electron paramagnetic resonance (EPR) confirmed that the hydroxyl radical (•OH) was the main oxidant, and its generation was amplified by Fe(Ⅲ)-EDTMP ligand metal charge transfer (LMCT) complex, which accelerated the Fe redox cycle and the removal of surface passivation layer. In contrast, phosphates (o-PO43-) modified the morphology of mZVI to decrease the dissolution of iron, but failed to stimulate •OH formation. The performance of the mZVI/air system was further optimized through modulation of ligand concentration and pH. Moreover, this work not only elucidates the mechanism of effective phosphonate degradation in mZVI/air systems, but also establishes a feasible “oxidation-precipitation” technique by utilizing the dual role of iron in free radical formation and phosphate fixation. This comprehensive strategy addresses the persistent and eutrophication risks of phosphonates and provides a sustainable solution for treating organophosphorus wastewater.
The organic pollutants emitted from industrial and agricultural activities pose a threat to water security and ecosystem health, creating an urgent demand for efficient treatment strategies. Coordination chemistry offers a viable route to enhance treatment selectivity by modulating pollutant reactivity. The phosphonate possesses the dual characteristics of persistent pollutants and efficient iron chelating ligands, making them particularly suitable for selective oxidation reactions and guiding reaction pathways. In this study, the selective oxidative degradation of phosphonate in the microscale zero valent iron (mZVI/air) system and its underlying mechanism were systematically studied. The coordination between phosphonates and iron ions was found to be central to the enhanced degradation performance. The results showed that the COD removal efficiency of ethylenediamine tetramethylene phosphonic acid (EDTMP) reached 94.5% within 30 min, and the iron utilization efficiency was 9.9 and 7.3 times higher than those of phenol and benzoic acid, respectively. Electron paramagnetic resonance (EPR) confirmed that the hydroxyl radical (•OH) was the main oxidant, and its generation was amplified by Fe(Ⅲ)-EDTMP ligand metal charge transfer (LMCT) complex, which accelerated the Fe redox cycle and the removal of surface passivation layer. In contrast, phosphates (o-PO43-) modified the morphology of mZVI to decrease the dissolution of iron, but failed to stimulate •OH formation. The performance of the mZVI/air system was further optimized through modulation of ligand concentration and pH. Moreover, this work not only elucidates the mechanism of effective phosphonate degradation in mZVI/air systems, but also establishes a feasible “oxidation-precipitation” technique by utilizing the dual role of iron in free radical formation and phosphate fixation. This comprehensive strategy addresses the persistent and eutrophication risks of phosphonates and provides a sustainable solution for treating organophosphorus wastewater.
2027, 38(1): 112855
doi: 10.1016/j.cclet.2026.112855
Abstract:
To address the challenges in total antioxidant capacity (TAC) detection, such as complex procedures and reliance on laboratory instruments, a novel Fe-Ni dual-atom nanozyme (Fe-Ni/CNv DSANs) was engineered by anchoring Fe-Ni single atoms on nitrogen-vacancy-rich graphitic carbon nitride. This nanozyme, featuring a unique Fe-Ni-N6–C coordination structure, functioned as a robust peroxidase mimic. It efficiently catalyzed the oxidation of colorless 3,3′,5,5′-tetramethylbenzidine (TMB) into a blue product in the presence of H2O2. The catalytic rate constant for H2O2 decomposition was significantly higher than those of single-atom analogues and even surpassed natural horseradish peroxidase. Experimental and theoretical analyses revealed that the synergistic interplay between Ni atoms and nitrogen vacancies optimizes the electronic structure of Fe active sites, thereby lowering the reaction energy barrier. A smartphone-based colorimetric platform was subsequently developed, achieving a wide linear range (5.0–300 μmol/L) and an ultra-low detection limit (0.024 μmol/L) for TAC determination in real samples like fruits and beverages. Furthermore, the nanozyme exhibited excellent biocompatibility, confirming its potential for practical on-site food quality monitoring.
To address the challenges in total antioxidant capacity (TAC) detection, such as complex procedures and reliance on laboratory instruments, a novel Fe-Ni dual-atom nanozyme (Fe-Ni/CNv DSANs) was engineered by anchoring Fe-Ni single atoms on nitrogen-vacancy-rich graphitic carbon nitride. This nanozyme, featuring a unique Fe-Ni-N6–C coordination structure, functioned as a robust peroxidase mimic. It efficiently catalyzed the oxidation of colorless 3,3′,5,5′-tetramethylbenzidine (TMB) into a blue product in the presence of H2O2. The catalytic rate constant for H2O2 decomposition was significantly higher than those of single-atom analogues and even surpassed natural horseradish peroxidase. Experimental and theoretical analyses revealed that the synergistic interplay between Ni atoms and nitrogen vacancies optimizes the electronic structure of Fe active sites, thereby lowering the reaction energy barrier. A smartphone-based colorimetric platform was subsequently developed, achieving a wide linear range (5.0–300 μmol/L) and an ultra-low detection limit (0.024 μmol/L) for TAC determination in real samples like fruits and beverages. Furthermore, the nanozyme exhibited excellent biocompatibility, confirming its potential for practical on-site food quality monitoring.
2027, 38(1): 112869
doi: 10.1016/j.cclet.2026.112869
Abstract:
The site-selective functionalization of C(sp2)−H bonds has emerged as powerful tools for molecular synthesis. The challenge in the field is to achieve different site selectivity reverse to electron-controlled electrophilic substitution under mild conditions. Herein, we report a mild Ru-catalyzed meta-selective C(sp2)−H alkylation of aniline derivatives. Mechanistic studies revealed a distinct Ru catalytic species ligated by two κ2-bound aminopyrimidine in an octahedral geometry. This ruthenium species is generated from dissociation of p-cymene to trigger the metallaphotoredox catalysis.
The site-selective functionalization of C(sp2)−H bonds has emerged as powerful tools for molecular synthesis. The challenge in the field is to achieve different site selectivity reverse to electron-controlled electrophilic substitution under mild conditions. Herein, we report a mild Ru-catalyzed meta-selective C(sp2)−H alkylation of aniline derivatives. Mechanistic studies revealed a distinct Ru catalytic species ligated by two κ2-bound aminopyrimidine in an octahedral geometry. This ruthenium species is generated from dissociation of p-cymene to trigger the metallaphotoredox catalysis.
2027, 38(1): 112876
doi: 10.1016/j.cclet.2026.112876
Abstract:
Reverse electrodialysis (RED) membranes represent a highly promising platform for nanofluidic osmotic energy conversion. However, achieving high ion permselectivity without sacrificing permeability remains a major challenge in the development of practical RED membranes. In this study, we present a transformative strategy to overcome this trade-off by engineering ultrathin conjugated microporous polymer (CMP)-based RED membranes with precision-tailored sub-nanochannel architectures. Functionalized CMP monomers enable the membranes to achieve finely tuned charge densities and polarities, significantly boosting both ion selectivity and permeability. Additionally, the integration of CMP membranes with anodized aluminum oxide substrates creates an asymmetric architecture that introduces unique ionic current rectification while effectively mitigating ion concentration polarization. These advancements yield a power density of 105.5 W/m2 under a 500-fold salinity gradient, outperforming the performance of most previously reported membranes. Our findings underscore the critical role of sub-nanochannel engineering in advancing RED technologies and demonstrate its broader potential for nanofluidic applications involving ionic transport, desalination, and energy conversion.
Reverse electrodialysis (RED) membranes represent a highly promising platform for nanofluidic osmotic energy conversion. However, achieving high ion permselectivity without sacrificing permeability remains a major challenge in the development of practical RED membranes. In this study, we present a transformative strategy to overcome this trade-off by engineering ultrathin conjugated microporous polymer (CMP)-based RED membranes with precision-tailored sub-nanochannel architectures. Functionalized CMP monomers enable the membranes to achieve finely tuned charge densities and polarities, significantly boosting both ion selectivity and permeability. Additionally, the integration of CMP membranes with anodized aluminum oxide substrates creates an asymmetric architecture that introduces unique ionic current rectification while effectively mitigating ion concentration polarization. These advancements yield a power density of 105.5 W/m2 under a 500-fold salinity gradient, outperforming the performance of most previously reported membranes. Our findings underscore the critical role of sub-nanochannel engineering in advancing RED technologies and demonstrate its broader potential for nanofluidic applications involving ionic transport, desalination, and energy conversion.
2027, 38(1): 112879
doi: 10.1016/j.cclet.2026.112879
Abstract:
Cobalt-manganese bimetallic oxides exhibit enhanced catalytic activity on activating peroxymonosulfate (PMS) over traditional catalysts featuring a single active site. In this work, two-dimensional (2D) spinel-type MnCo2O4 hexagonal nanosheets (HNSs) are prepared as an effective PMS activation catalyst toward the degradation of tetracycline hydrochloride (TC). The MnCo2O4 HNSs demonstrate superior catalytic activity in activating PMS to degrade TC (97.0% within 315 s), which is much higher than that of MnCo2O4 nanobulks (NBs) (75.6%). And the reaction kinetic of MnCo2O4 HNSs is approximately 2.5 times faster than that of the MnCo2O4 NBs. By analyzing quenching and EPR tests, it suggests that •O2−, SO4−•, •OH and 1O2 radicals all together contribute to the TC removal in MnCo2O4 HNSs/PMS system, particularly SO4−• and •O2− play critical roles during the process of TC degradation reaction. This can be attributed to the synergy of Co-Mn catalysis and their specific hexagonal nanosheets structure. Besides, the MnCo2O4 HNSs also exhibit high stability for degrading TC, indicating the high-potential applications in environment. This study proposes a new insight to develop catalysts in the combination of Co-Mn synergy and 2D nanosheet structure regulation towards high-efficient antibiotics wastewater treatment.
Cobalt-manganese bimetallic oxides exhibit enhanced catalytic activity on activating peroxymonosulfate (PMS) over traditional catalysts featuring a single active site. In this work, two-dimensional (2D) spinel-type MnCo2O4 hexagonal nanosheets (HNSs) are prepared as an effective PMS activation catalyst toward the degradation of tetracycline hydrochloride (TC). The MnCo2O4 HNSs demonstrate superior catalytic activity in activating PMS to degrade TC (97.0% within 315 s), which is much higher than that of MnCo2O4 nanobulks (NBs) (75.6%). And the reaction kinetic of MnCo2O4 HNSs is approximately 2.5 times faster than that of the MnCo2O4 NBs. By analyzing quenching and EPR tests, it suggests that •O2−, SO4−•, •OH and 1O2 radicals all together contribute to the TC removal in MnCo2O4 HNSs/PMS system, particularly SO4−• and •O2− play critical roles during the process of TC degradation reaction. This can be attributed to the synergy of Co-Mn catalysis and their specific hexagonal nanosheets structure. Besides, the MnCo2O4 HNSs also exhibit high stability for degrading TC, indicating the high-potential applications in environment. This study proposes a new insight to develop catalysts in the combination of Co-Mn synergy and 2D nanosheet structure regulation towards high-efficient antibiotics wastewater treatment.
2027, 38(1): 112884
doi: 10.1016/j.cclet.2026.112884
Abstract:
The rapid recombination of charge carriers presents one of the major bottlenecks to the solar photocatalytic degradation of antibiotic contaminants. In this work, a glycerol-assisted solvothermal method was established for the synthesis of BiOI piezo-photocatalysts with adjustable oxygen defect densities. The introduced oxygen vacancies (OVs) function as efficient electron traps, synergistically capturing both photo-generated and piezoelectric-induced electrons to markedly suppress charge recombination. Under coupled visible-light and ultrasound irradiation, the optimized BiOI-OVs-1 catalyst achieves 89.2% degradation rate of tetracycline within 20 min. The favorable conduction band position (-1.03 V vs. NHE), coupled with the presence of OVs, significantly enhances reactive oxygen species (ROS) generation, where superoxide radical (•O2-) and holes (h+) are identified as the dominant active species. The catalyst also exhibits excellent stability, maintaining over 80% efficiency after five cycles, and shows strong adaptability over a wide pH range, in the presence of competing anions, and in various real water samples. This study presents a viable defect-engineering strategy for the design of high-performance piezo-photocatalysts, and it deciphers the essential function of OVs in advancing antibiotic wastewater remediation.
The rapid recombination of charge carriers presents one of the major bottlenecks to the solar photocatalytic degradation of antibiotic contaminants. In this work, a glycerol-assisted solvothermal method was established for the synthesis of BiOI piezo-photocatalysts with adjustable oxygen defect densities. The introduced oxygen vacancies (OVs) function as efficient electron traps, synergistically capturing both photo-generated and piezoelectric-induced electrons to markedly suppress charge recombination. Under coupled visible-light and ultrasound irradiation, the optimized BiOI-OVs-1 catalyst achieves 89.2% degradation rate of tetracycline within 20 min. The favorable conduction band position (-1.03 V vs. NHE), coupled with the presence of OVs, significantly enhances reactive oxygen species (ROS) generation, where superoxide radical (•O2-) and holes (h+) are identified as the dominant active species. The catalyst also exhibits excellent stability, maintaining over 80% efficiency after five cycles, and shows strong adaptability over a wide pH range, in the presence of competing anions, and in various real water samples. This study presents a viable defect-engineering strategy for the design of high-performance piezo-photocatalysts, and it deciphers the essential function of OVs in advancing antibiotic wastewater remediation.
2027, 38(1): 112962
doi: 10.1016/j.cclet.2026.112962
Abstract:
Sulfoximines are widely regarded as valuable skeletons in drug research and development. We herein report a dual visible-light photoredox and copper-catalyzed arylation of NH-sulfoximines by using thianthrenium salts as the aryl sources. This strategy provides an indirect method for the synthesis of N-aryl sulfoximines via site-selective aryl C—H bond functionalization, affording a convenient method with broad substrate scope and excellent functional group tolerance.
Sulfoximines are widely regarded as valuable skeletons in drug research and development. We herein report a dual visible-light photoredox and copper-catalyzed arylation of NH-sulfoximines by using thianthrenium salts as the aryl sources. This strategy provides an indirect method for the synthesis of N-aryl sulfoximines via site-selective aryl C—H bond functionalization, affording a convenient method with broad substrate scope and excellent functional group tolerance.
Tunable hydrophobic branching modules enforce antitumor efficacy of docetaxel prodrug nanoassemblies
2027, 38(1): 112981
doi: 10.1016/j.cclet.2026.112981
Abstract:
Prodrug nanoassemblies built by drug modules, response modules and modification modules overcome the limitations of poor pharmacokinetics and systemic toxicity of chemotherapeutic agents. However, rational design of modification modules to regulate the hydrophilic-hydrophobic balance of prodrugs to synchronously improve the assembly stability, drug release rate and antitumor efficacy remains a challenge. Herein, three docetaxel (DTX) prodrug nanoassemblies were engineered using branched fatty acids with different carbon chain lengths as modification modules (DTX-SS-BFAC14 NPs, DTX-SS-BFAC16 NPs, and DTX-SS-BFAC18 NPs). The hydrophobic effect-performance relationship of the prodrug nanoassemblies was revealed by a systematic comparative study: DTX-SS-BFAC18 NPs with the longest carbon chain exhibited the optimal hydrophobic interaction-driven self-assembly, but impeded the release of DTX. Compared to DTX-SS-BFAC18 NPs, DTX-SS-BFAC14 NPs showed stronger hydrophilicity, allowing for faster release of DTX in the tumor redox microenvironment, with superior cytotoxicity and antitumor potency. However, the excessively sensitive drug release of DTX-SS-BFAC14 NPs reduced the tumor selectivity and tolerability. DTX-SS-BFAC16 NPs balanced hydrophilicity and hydrophobicity, ensuring assembly stability while rapidly releasing DTX within tumor cells, demonstrating favorable antitumor activity and tolerability. Our study highlighted the necessity of considering the hydrophilic-hydrophobic balance in the rational engineering of prodrug nanomedicines.
Prodrug nanoassemblies built by drug modules, response modules and modification modules overcome the limitations of poor pharmacokinetics and systemic toxicity of chemotherapeutic agents. However, rational design of modification modules to regulate the hydrophilic-hydrophobic balance of prodrugs to synchronously improve the assembly stability, drug release rate and antitumor efficacy remains a challenge. Herein, three docetaxel (DTX) prodrug nanoassemblies were engineered using branched fatty acids with different carbon chain lengths as modification modules (DTX-SS-BFAC14 NPs, DTX-SS-BFAC16 NPs, and DTX-SS-BFAC18 NPs). The hydrophobic effect-performance relationship of the prodrug nanoassemblies was revealed by a systematic comparative study: DTX-SS-BFAC18 NPs with the longest carbon chain exhibited the optimal hydrophobic interaction-driven self-assembly, but impeded the release of DTX. Compared to DTX-SS-BFAC18 NPs, DTX-SS-BFAC14 NPs showed stronger hydrophilicity, allowing for faster release of DTX in the tumor redox microenvironment, with superior cytotoxicity and antitumor potency. However, the excessively sensitive drug release of DTX-SS-BFAC14 NPs reduced the tumor selectivity and tolerability. DTX-SS-BFAC16 NPs balanced hydrophilicity and hydrophobicity, ensuring assembly stability while rapidly releasing DTX within tumor cells, demonstrating favorable antitumor activity and tolerability. Our study highlighted the necessity of considering the hydrophilic-hydrophobic balance in the rational engineering of prodrug nanomedicines.
2027, 38(1): 113116
doi: 10.1016/j.cclet.2026.113116
Abstract:
The direct hydrocyanation reaction on enaminones has been realized by employing TMSCN and water as reaction partners, allowing the synthesis of valuable α-aminonitriles under ambient and transition-metal-free conditions in either neat operation or in N,N-dimethyl acetamide (DMA). The work expands the scope of classical Strecker reaction to access highly functionalized and useful α-aminonitriles with rather simple operation and broad scope.
The direct hydrocyanation reaction on enaminones has been realized by employing TMSCN and water as reaction partners, allowing the synthesis of valuable α-aminonitriles under ambient and transition-metal-free conditions in either neat operation or in N,N-dimethyl acetamide (DMA). The work expands the scope of classical Strecker reaction to access highly functionalized and useful α-aminonitriles with rather simple operation and broad scope.
2027, 38(1): 113242
doi: 10.1016/j.cclet.2026.113242
Abstract:
The development of high-performance inorganic-organic hybrid electrocatalysts remains challenging, despite their intrinsic advantages in molecular structure tunability, cost-effectiveness, and environmental compatibility. Here, we propose an electrochemical reconstruction strategy for metal-organic frameworks (MOFs) to fabricate inorganic-organic hybrid electrocatalyst. Driven by electrochemical activation, RhZn-ZIF-L undergoes derivatization into functionalized polyacrylonitrile (FPAN) rich in carboxyl (COOH) and amide (CONH2) groups and decorated with Rh quantum dots (QDs), forming the RhQDs/FPAN electrocatalyst. The CONH2 groups enhance the conductivity and stability of RhQDs/FPAN by forming Rh–N bonds with Rh QDs, whereas the COOH groups act as proton transfer stations, facilitating hydrogen spillover to promote proton transfer, which synergistically enables efficient and durable hydrogen evolution reaction (HER). Remarkably, the optimized RhQDs/FPAN-3 achieves current densities of 10 and 1000 mA/cm2 at overpotentials of only 14 and 360 mV, respectively, significantly outperforming commercial Pt/C (32 and 431 mV) and all reported inorganic-organic hybrid electrocatalysts to date. Moreover, it demonstrates outstanding stability, sustaining HER for 137 and 520 h at 10 and 1000 mA/cm2, respectively. This work establishes a scalable paradigm for designing and tailoring electrocatalysts via MOF reconstruction.
The development of high-performance inorganic-organic hybrid electrocatalysts remains challenging, despite their intrinsic advantages in molecular structure tunability, cost-effectiveness, and environmental compatibility. Here, we propose an electrochemical reconstruction strategy for metal-organic frameworks (MOFs) to fabricate inorganic-organic hybrid electrocatalyst. Driven by electrochemical activation, RhZn-ZIF-L undergoes derivatization into functionalized polyacrylonitrile (FPAN) rich in carboxyl (COOH) and amide (CONH2) groups and decorated with Rh quantum dots (QDs), forming the RhQDs/FPAN electrocatalyst. The CONH2 groups enhance the conductivity and stability of RhQDs/FPAN by forming Rh–N bonds with Rh QDs, whereas the COOH groups act as proton transfer stations, facilitating hydrogen spillover to promote proton transfer, which synergistically enables efficient and durable hydrogen evolution reaction (HER). Remarkably, the optimized RhQDs/FPAN-3 achieves current densities of 10 and 1000 mA/cm2 at overpotentials of only 14 and 360 mV, respectively, significantly outperforming commercial Pt/C (32 and 431 mV) and all reported inorganic-organic hybrid electrocatalysts to date. Moreover, it demonstrates outstanding stability, sustaining HER for 137 and 520 h at 10 and 1000 mA/cm2, respectively. This work establishes a scalable paradigm for designing and tailoring electrocatalysts via MOF reconstruction.
2027, 38(1): 113243
doi: 10.1016/j.cclet.2026.113243
Abstract:
In recent years, carbon-based all-inorganic CsPbBr3 perovskite solar cells have attracted considerable attention within the metal halide perovskite family due to their excellent environmental stability and the advantages of low-cost, fully air-processable fabrication, making them one of the research hotspots in the field of perovskite photovoltaics. However, their efficiency is primarily limited by the high density of bulk defects and severe charge recombination. In this study, 4-sulfobenzoic acid (4-SBZ) was introduced as a Lewis-base additive into the PbBr2 precursor to simultaneously regulate growth of PbBr2 and passivate defects, and thereby promote a complete reaction with the CsBr solution for fabricating high-quality perovskite films, which effectively suppresses non-radiative recombination. The modified CsPbBr3 perovskite solar cells achieved an efficiency improvement of 11.30%, while the unencapsulated devices maintained excellent storage stability for over 1200 h under harsh conditions of high humidity (30%-50% RH, 25 ℃) and high temperature (0% RH, 85 ℃).
In recent years, carbon-based all-inorganic CsPbBr3 perovskite solar cells have attracted considerable attention within the metal halide perovskite family due to their excellent environmental stability and the advantages of low-cost, fully air-processable fabrication, making them one of the research hotspots in the field of perovskite photovoltaics. However, their efficiency is primarily limited by the high density of bulk defects and severe charge recombination. In this study, 4-sulfobenzoic acid (4-SBZ) was introduced as a Lewis-base additive into the PbBr2 precursor to simultaneously regulate growth of PbBr2 and passivate defects, and thereby promote a complete reaction with the CsBr solution for fabricating high-quality perovskite films, which effectively suppresses non-radiative recombination. The modified CsPbBr3 perovskite solar cells achieved an efficiency improvement of 11.30%, while the unencapsulated devices maintained excellent storage stability for over 1200 h under harsh conditions of high humidity (30%-50% RH, 25 ℃) and high temperature (0% RH, 85 ℃).
2027, 38(1): 113278
doi: 10.1016/j.cclet.2026.113278
Abstract:
Lignin, as a renewable resource, is increasingly utilized in the field of energy storage due to its eco-friendly properties. However, the low graphitization degree of lignin-based carbon materials restricts their application. This paper proposes an effective strategy for enhancing the non-covalent interactions within lignin molecules through iodine treatment, thereby a lignin-based carbon materials with a high degree of graphitization (IALC) is achieved. The results from TG-DSC, SEM, TEM, XRD, and Raman analyses indicate that iodine treatment significantly improves the thermodynamic properties of lignin and increases the carbonization yield. The morphology of lignin-derived carbon materials is better preserved, with enhanced formation of graphite microcrystals and an improved degree of graphitization. The IALC electrode prepared using this material exhibited a significant increase in specific capacitance, rising from 350.2 mF/cm2 to 1090.7 mF/cm2 at 0.2 mA/cm2, and from 132.2 mF/cm2 to 588.0 mF/cm2 at 10 mA/cm2. Additionally, the series resistance (Rs) and charge-transfer resistance (Rct) of the electrodes after iodination decreased from 2.31 Ω and 6.97 Ω to 1.27 Ω and 1.61 Ω, respectively. Trasatti analysis reveals that the enhancement in material properties primarily results from the increased degree of graphitization. The assembled supercapacitors of IALC-4//IALC-4 achieved an energy density of 61.27 mWh/cm2 at a power density of 100 mW/cm2. When the power density is increased to 5000 mW/cm2, the energy density still remained at 25.55 mWh/cm2. And the capacitance retention rate exceeded 90.69% after 10,000 charge-discharge cycles. This study provides a novel approach for the high-value utilization of lignin and offers promising potential for future applications in electrode materials.
Lignin, as a renewable resource, is increasingly utilized in the field of energy storage due to its eco-friendly properties. However, the low graphitization degree of lignin-based carbon materials restricts their application. This paper proposes an effective strategy for enhancing the non-covalent interactions within lignin molecules through iodine treatment, thereby a lignin-based carbon materials with a high degree of graphitization (IALC) is achieved. The results from TG-DSC, SEM, TEM, XRD, and Raman analyses indicate that iodine treatment significantly improves the thermodynamic properties of lignin and increases the carbonization yield. The morphology of lignin-derived carbon materials is better preserved, with enhanced formation of graphite microcrystals and an improved degree of graphitization. The IALC electrode prepared using this material exhibited a significant increase in specific capacitance, rising from 350.2 mF/cm2 to 1090.7 mF/cm2 at 0.2 mA/cm2, and from 132.2 mF/cm2 to 588.0 mF/cm2 at 10 mA/cm2. Additionally, the series resistance (Rs) and charge-transfer resistance (Rct) of the electrodes after iodination decreased from 2.31 Ω and 6.97 Ω to 1.27 Ω and 1.61 Ω, respectively. Trasatti analysis reveals that the enhancement in material properties primarily results from the increased degree of graphitization. The assembled supercapacitors of IALC-4//IALC-4 achieved an energy density of 61.27 mWh/cm2 at a power density of 100 mW/cm2. When the power density is increased to 5000 mW/cm2, the energy density still remained at 25.55 mWh/cm2. And the capacitance retention rate exceeded 90.69% after 10,000 charge-discharge cycles. This study provides a novel approach for the high-value utilization of lignin and offers promising potential for future applications in electrode materials.
2027, 38(1): 113286
doi: 10.1016/j.cclet.2026.113286
Abstract:
2027, 38(1): 113287
doi: 10.1016/j.cclet.2026.113287
Abstract:
2027, 38(1): 113331
doi: 10.1016/j.cclet.2026.113331
Abstract:
Login In
