引用本文:
Hong Mei YANG, Zhen Wei ZHANG, Han LI, Qiang ZHENG. Te Effects of Dispersed Phase Morphology Induced by Flow on the Bulk Viscosity of HDPE/PA Blends[J]. Chinese Chemical Letters,
2006, 17(11): 1515-1518.
Citation: Hong Mei YANG, Zhen Wei ZHANG, Han LI, Qiang ZHENG. Te Effects of Dispersed Phase Morphology Induced by Flow on the Bulk Viscosity of HDPE/PA Blends[J]. Chinese Chemical Letters, 2006, 17(11): 1515-1518.
Citation: Hong Mei YANG, Zhen Wei ZHANG, Han LI, Qiang ZHENG. Te Effects of Dispersed Phase Morphology Induced by Flow on the Bulk Viscosity of HDPE/PA Blends[J]. Chinese Chemical Letters, 2006, 17(11): 1515-1518.
Te Effects of Dispersed Phase Morphology Induced by Flow on the Bulk Viscosity of HDPE/PA Blends
摘要:
The apparent shear viscosity (ηa) of a blend composed of 97 wt% high-density polyethylene (HDPE) and 3 wt% polyamide (PA-66) was measured by capillary rheometry at different shear rates, below, near and above the melting point of PA-66, i.e. 240℃, 260℃ and 280℃, respectively. At 260℃ and a high shear rate, ηa of the blend reduced abnormally; and at 260℃, was lower than that at 280℃. The images of etched surface of extrudate observed by the SEM showed different dispersed phase morphology, induced by flow at different temperatures. It is suggested that the formation of fibrillar morphology of dispersed phase is a key factor for the abnormal reduction of ηa for the HDPE/PA blend.
English
Te Effects of Dispersed Phase Morphology Induced by Flow on the Bulk Viscosity of HDPE/PA Blends
Abstract:
The apparent shear viscosity (ηa) of a blend composed of 97 wt% high-density polyethylene (HDPE) and 3 wt% polyamide (PA-66) was measured by capillary rheometry at different shear rates, below, near and above the melting point of PA-66, i.e. 240℃, 260℃ and 280℃, respectively. At 260℃ and a high shear rate, ηa of the blend reduced abnormally; and at 260℃, was lower than that at 280℃. The images of etched surface of extrudate observed by the SEM showed different dispersed phase morphology, induced by flow at different temperatures. It is suggested that the formation of fibrillar morphology of dispersed phase is a key factor for the abnormal reduction of ηa for the HDPE/PA blend.
-
Key words:
- Viscosity reduction
- / polyethylene
- / polyamide
- / droplet deformation
扫一扫看文章
计量
- PDF下载量: 0
- 文章访问数: 0
- HTML全文浏览量: 0
下载:
